Buscar en el registro

Leaning forward trimming curbing and hurt lower back

stood up after striking Wedges with a 12 lb hammer and felt back pain

Employee using hand tool, piece of steel broke off and projected into left arm hitting main artery.

Piece of steel chipped off hammer employee was using on granite slabs, hit in chest (left side). X-rays not clear at first if foreign object in body, reread and recommending removal of foreign object.

While jointing granite with hand tool, piece of metal chipped off from hand tool and entered employee's right leg

employee cutting a piece of plastic pipe with a utility knife, knife slipped and cut side of palm

While jointing the stone, hand tool chipped off metal & metal piece went into left leg.

Using a hand tool to trim granite, piece of steel went into leg.

Employee was lifting curb with a bar - that had tipped over during the finishing process. (NOTE: LOST TIME BEGAN 8/27/09)

Employee was cutting curb using a steel hand chisel. A piece of steel broke off and went into his left knee.

Employee was cutting curb using a hand set. A piece of metal from the hand set flew off when he hit the granite. It lodged in his stomach area.

Employee was holding a hand "bull set" and another employee was hitting it w/a sledge hammer. A piece of granite broke off the curbing and a chip hit the top of his right hand.

Employee was using two wrenches - pulling each one - and felt something "let go" in his left chest/shoulder area.

Employee was using a long steel bar to clear the channel in the quarry - where the burner was having a hard time burning away the granite.

Employee trying to move Slot Drill over w/a bar. The Slot Drill dropped a few inches and the bar came down on his foot.

EMPLOYEE WAS SWEEPING OFF THE GRANITE SLAB BEFORE SPLITTING IT. THE BROOM HANDLE BROKE AND SLID ALONG HIS HAND/THUMB.

Ee had one foot on the block that he was "breaking". When it broke, ee fell and hit his side on the block.

EE WAS CHAINING A GRANITE BLOCK INT HE QUARRY WHEN THE CHAIN SLIPPED AND HIS ARM DRAGGED ALONG THE STONE.

EMPLOYEE WAS TRYING TO FREE A STUCK METAL WEDGE FROM THE GRANITE USING A SLEDGEHAMMER. HIS FINGER GOT IN THE WAY.

EE HAD BEEN USING A HAMMER TO FINISH THE CURBING AND WAS PUSHING THE CURBING ON ROLLERS. HE STARTED TO HAVE PAIN IN JUNE 2002, AND TRIED TO WORK AND THOUGHT IT WOULD GET BETTER. ON 7/22/02 HE MADE AN APPOINTMENT W/HIS DR. AS IT WAS WORSE.

EE WAS TURNING OVER A PIECE OF CURB ON THE BANKERS WHEN IT TIPPED AND HE WENT TO GRAB IT AND IT CUT HIS HAND WHEN IT SLID DOWN.

EMPLOYEE WAS SWINGING A SLEDGEHAMMER ONTO A WEDGE. THE HAND HOLDING THE WEDGE MOVED AND WAS CUT BY THE END OF A PIECE OF GRANITE.

EE WAS HITTING A WEDGE WITH A SLEDGEHAMMER AND THE HAMMER MISSED THE WEDGE & HIT HIS THUMB

EE WAS KNOCKING BITS OFF THE DRILL STEEL WITH A HAMMER WHEN A PIECE OF STEEL BROKE OFF THE HAMMER AND HIT HIS LEG.

EMPLOYEE WAS MOVING THE SLOT DRILL, PRYING ON THE DRILL TO GET IT ON LINE.

EE WAS USING A BAR TO REPOSITION THE LIFT DRILL WHEN THE BAR SLIPPED AND HIS HAND HIT UP AGAINST THE DRILL.

EE WAS USING WEDGES AND A SLEDGEHAMMER TO CUT OFF A SMALL PIECE OF GRANITE WHEN THE PIECE BROKE OFF, BOUNCED ON THE GROUND AND THEN HIS HIS FOOT.

EE WAS HOLDING A STEEL ROD ONTO THE DRILL RIG AS THEY WERE TRYING TO REMOVE A BOLT. ANOTHER EE WAS HITTING THE ROD WITH A SLEDGE HAMMER AND MISSED.

EE WAS HITTING A STEEL WEDGE WITH A SLEDGEHAMMER WHEN IT "POPPED" BACK INTO HIS FACE.

EE WAS TRYING TO GET A COUPLING OFF A STEEL DRILL ROD WITH A HAMMER. A PIECE OF THE HAMMER BROKE OFF AND HIT HIM IN THE CHEST.

EMP WAS SWINGING A SLEDGE HAMMER TO PUT SHIMS AND WEDGES INTO THE BLOCKS. WAS DOING THIS FOR QUITE A FEW HOURS EACH DAY. EMP NOTICED SOME PAIN AROUND THE 11-4-96 DATE. THOUGHT IT WOULD JUST GO AWAY SO CONTINUED WORKING. FINALLY COULD NOT STAND THE PAIN ANYMORE ON 11-18-96 AND ASKED TO GO SEE THE DR AT THAT TIME.

EMPLOYEE WAS HAMMERING A STEEL WEDGE WHEN A PIECE OF THE WEDGE BROKE OFF AND FLEW UP AND HIT HIM IN THE NOSE.

EMPLOYEE WAS USING WEDGES & SHIMS ON A RIFT LINE - WHEN HE HIT THE WEDGE, IT BOUNCED OUT OF THE HOLE AND HIT HIS NOSE.

REPETITIVELY SCOOPING PLASTER ONTO A BOARD.

EMPLOYEE WAS TRYING TO REMOVE A WEDGE FROM A HOLE IN THE STONE WITH A METAL BAR, WHEN A PIECE OF STEEL BROKE OFF THE BAR WHEN IT STRUCK THE WEDGE.

EE WAS TRYING TO PRY A PIECE OF GRANITE OVER IN THE KEYWAY WHEN HE LOST HIS GRIP AND THE BAR SNAPPED BACK.

EE WAS CHAINING A BLOCK AND FELT A PAIN IN HIS BACK AND DOWN HIS LEG.

EE WAS USING THE SLEDGE HAMMER WHEN THE HEAD CAME OFF AND HIS HAND CAME DOWN FAST AND HARD ON THE GRANITE OR A STEEL WEDGE.

EE WAS MOVING A GRANITE SLAB WITH A BAR WHEN IT HIT A RIDGE IN THE STONE AND BROKE OFF AND THE EE LOST HIS BALANCE.

EMPLOYEE WAS BREAKING PIECES OF GRANITE WITH A SLEDGE HAMMER WHEN A SMALL PIECE BROKE OFF AND FLEW & LODGED IN RIGHT HAND.

EMPLOYEE WAS HELPING ANOTER EMPLOYEE SET UP A STATIONARY DRILL.THE OTHER EMPLOYEE ATTEMPTED TO PUT THE DRILL LEG IN PLACE USING THE SLEDGE HAMMER.INJUREDS LEG WAS IN THE WAY0AS THE OTHER EMPLO YEE MISSED HITTING THE DRILL LEG.

CUTTING POST BY HAND IT SPLIT AWAY FROM SLAB SLID OFF BLOCKING

EMPLOYEE WAS SETTING UP THE CHANNEL BAR AND WENT TO TIGHTEN THE BOLT BY KICKING IT AND HIS FOOT SLIPPED AND THE WRENCH FLEW OFF AND HIT HIM IN THE LEFT LEG.