Mining Incidents

Buscar en el registro

Cada lesión y muerte que la MSHA tiene registrada. Filtra por estado, año, sector, clasificación, experiencia o cualquier palabra clave de la narrativa del investigador.

Incidentes totales
273,193
De los cuales mortales
1,202
Años en el registro
2000–2026
Clasificaciones
20
Filtros 2 activos
Período
Experiencia al momento del incidente

Notifícame sobre esta búsqueda

Envíame un correo cuando un nuevo incidente coincida con estos filtros. Un correo de confirmación; cancela la suscripción cuando quieras.

El registro

9 registros coincidentes

Mostrando los 9
21 de agosto de 2024 NC · Metal/No metálico Encargado de mantenimiento, Mecánico, Reparador/Encargado de servicio, Calderero, Abastecedor de combustible, Técnico de llantas, Técnico de servicio en campo HERRAMIENTAS MANUALES (SIN MOTOR)
Carolina Stalite Company LP · Atrapado en, bajo o entre un objeto en movimiento y uno fijo

EE was using a 24" pipe wrench and mashed finger in between the wrench's handle and another pipe lacerating and fracturing the tip of EE's right ring finger through EE's glove. The laceration required stitches thus making this MSHA reportable.

12 de julio de 2023 NC · Metal/No metálico Operador de secador, Operador de horno, Operador de planta de secado, Operador de fluidos, Operador de secador de lecho HERRAMIENTAS MANUALES (SIN MOTOR)
Carolina Stalite Company · Golpeado por... no clasificado en otra parte

Employee was cutting a few feet off a hose to replace a section on a waterline that was leaking. While doing so employee went to cut the piece and that's when they cut their middle finger on the tip of the left hand.

24 de septiembre de 2020 NC · Metal/No metálico Operador de secador, Operador de horno, Operador de planta de secado, Operador de fluidos, Operador de secador de lecho HERRAMIENTAS MANUALES (SIN MOTOR)
Carolina Stalite Company · Golpeado por... no clasificado en otra parte

The injured employee along with two others were locking down large threaded nuts on the coal mill roller journal assembly, using a large open end wrench and a 10lb sledge hammer. The injured EE was holding and adjusted the wrench when the hammer hit EE's middle finger.

27 de octubre de 2019 NC · Metal/No metálico Operador de secador, Operador de horno, Operador de planta de secado, Operador de fluidos, Operador de secador de lecho HERRAMIENTAS MANUALES (SIN MOTOR)
Carolina Stalite Company · Golpeado por... no clasificado en otra parte

Employee was trying to position a sprinkler head on a conveyor using zip tie straps. Seeing that EE had positioned the sprinkler head incorrectly, EE was going to use a utility knife to cut the zip tie. Sometime during this task, EE cut self.

15 de julio de 2019 NC · Metal/No metálico Encargado de mantenimiento, Mecánico, Reparador/Encargado de servicio, Calderero, Abastecedor de combustible, Técnico de llantas, Técnico de servicio en campo HERRAMIENTAS MANUALES (SIN MOTOR)
Carolina Stalite Company · Sobreesfuerzo al manejar o lanzar objetos

Employee was attempting to remove a coal mill roller from its journal using a 5 pound sledge hammer. Not being successful, they then began using a 10 pound sledge hammer. On about the 5th swing, they lost movement to their right shoulder.

16 de enero de 2019 NC · Metal/No metálico Encargado de mantenimiento, Mecánico, Reparador/Encargado de servicio, Calderero, Abastecedor de combustible, Técnico de llantas, Técnico de servicio en campo HERRAMIENTAS MANUALES (SIN MOTOR)
Carolina Stalite Company · Golpeado por... no clasificado en otra parte

Employee was trimming the rail rubber with a utility knife so the wire mash screen could clear and go underneath the lip. The knife slipped and cut their left hand.

18 de diciembre de 2018 NC · Metal/No metálico Almacenista, Ensacador, Paletizador/Apilador, Encargado de almacén, Empacador, Fabricante, Operador de planta de lavado HERRAMIENTAS MANUALES (SIN MOTOR)
Carolina Stalite Company · Golpeado por... no clasificado en otra parte

Employee was trying to remove a nylon coupling from a hydraulic pump with a small pry bar. Bar slipped from employees grip hitting EE in the lower lip causing a laceration requiring 7 sutures. Employee returned to work the following day with only restriction was to keep injured area clean.

24 de diciembre de 2016 NC · Metal/No metálico Almacenista, Ensacador, Paletizador/Apilador, Encargado de almacén, Empacador, Fabricante, Operador de planta de lavado HERRAMIENTAS MANUALES (SIN MOTOR)
Carolina Stalite Company · Absorción de radiaciones, cáusticos, sustancias tóxicas y nocivas

The injured and another employee was cleaning out a lime slurry tank. The steel rod that they where using got stuck inside the tank. As they where pulling the rod out lime slurry started to flow. They where closing the gate valve, lime splashed into injured employee's eyes.

4 de octubre de 2016 NC · Metal/No metálico Obrero, Herrero, Cuadrilla, Mensajero de repuestos, Peón, Recolector, Operario de mina HERRAMIENTAS MANUALES (SIN MOTOR)
Carolina Stalite Company · Golpeado por... no clasificado en otra parte

Employee was cutting a piece of rubber with a utility knife. Employee accidently cut hand.

Mostrando los 9