Buscar en el registro

Employee strained his lower back while using a ratchet chain hoist to make a belt splice.

EE was hitting a waterline splice with a hammer and a piece of metal chipped off the hammer and went into his right arm. EE went to the hospital to have it checked and returned to work the same day.

Employee was trying to break loose some bolts on a 10SC shuttle car. The breaker bar he was using slipped and hit him in the forehead causing a laceration.

Employee strained his lower back while using a bar to lift the track.

The employee was jacking up a rail mantrip and a crib block fell on his right hand. He went to the hospital after work and got an X-ray. His right hand had a fracture and they put a brace on it. He returned to work the next day.

Employee was trimming the skirt rubber in a tail-piece and cut his left hand with a utiltiy knife. He went to the hospital after work and they glued the cut closed. He returned to work the next day.

The employee was knocking in a wedge to set a timber and small piece of wood went into his right eye. Employee stated he was wearing safety glasses but they had slipped down his nose. Employee went to the eye doctor and had the small piece of wood removed from his eye. He then returned back to work.

Employee was using a chain hoist to pull rail on the flat car. The chain hoist came loose and hit him in the mouth breaking off one of his front teeth. Employee continued working.

THE EMPLOYEE WAS LIFTING WHEEL UNIT WITH A SLATE BAR WHEN THE SLATE BAR SLIPPED & CUT THE TOP OF HIS RIGHT HAND. THIS RESULTED IN A LACERATION THAT RECEIVED 10 STITCHES.

EE WAS DRIVING AN INSERT IN RIPPERHEAD AND A PIECE OF METAL HIT HIM IN FACE.

WHILE EMPLOYEE WAS PUTTING JACK ON CONTINUOUS MIENER THE PIPE WRENCH HE WAS USING BROKE AND CUT LEFT HAND.

EE WAS MAKING A CABLE SPLICE HE BRUISED HI CHEST & RIB CAGE WITH THE CABLE CRIMPERS. THE FIRST DAY MISSED WAS 3-1-94. NOTE: EE DID NOT REPORT THIS TO THE OPERATOR UNTIL 3-7-94.

THE EMPLOYEE WAS CUTTING A PIECE OF CONVEYOR BELT WHEN HIS KNIFE SLIPPED. THIS RESULTED IN AN INCISION TO HIS UPPER LEFT LEG.

WHEN THE EMPLOYEE WAS INSTALLING A CHAIN IN THE FEEDER HE HIT HIS SELF ON THE KNEE WITH A HAMMER.

WHEN THE EMPLOYEE WAS CUTTING A BOX THE KNIFE SLIPPED & CUT HIS LEFT ARM

68935 WORKING ON A BELT SPLICE THE EMPLOYEE WAS PULLING THE BROKEN BELT TOGETHER WITH A GERMAN HOIST HOIST HANDLE SLIPPED & HIT HIM IN THE RIBS THIS RESULTED IJN TWO FRACTURED RIBS TO HIS LEFT 02945

ON 3-16-92, HE TELEPHONED TO REPORT THIS ALLEGED ACCIDENT THAT WHILE MAKING A SPLICE, THE CRIMPING TOOL SLIPPED WHEN HE HIT IT WITH A HAMMER AND THUS STRAINING HIS BACK. SEVERAL ATTEMPTS HAVE BEEN MADE TO CONTACT HIM ABOUT INFORMATION CONCERNING THIS ALLEGED ACCIDENT AND EXPERIENCE.

THE EMPLOYEE CUT HIS LEFT THUMB WHEN HIS KNIFE SLIPPED WHILE MAKING A CABLE SPLICE.

WHEN HE WAS ASSISTING IN REMOVING A BELT CLAMP, HIS WRENCH SLIPPED AND CAUSED A SUPERFICIAL LACERATION TO HIS MIDDLE FINGER ON HIS LEFT HAND.

VICTIM WAS IN THE PROCESS OF REMOVING CONCRETE FORMS AT A HEIGHT OF 35' VICTIM WAS NOT TIED OFF.VICTIM FELL WHEN THE SLATE BAR HE WAS USING SLIPPED.

WHEN I.NAME WAS CUTTING A WIRE LEAD FOR A BELT STARTER A PIECE OF WIRE FLEW INTO HIS RIGHT EYE.

WHEN I NAME WAS PULLING A CONVEYOR CHAIN TOGETHER WITH A HOIST HE STRAINED A MUSCLE IN HIS LOWER BACK

I NAME WAS WORKING ON THE NO2 SHUT TLE CAR WHEN HIS RACHET SLIPPED THUS CAUSING IT TO COME BACK & HIT HIM ON THE FOREHEAD THIS CAUSED A LACERATION ABOUT AN INCH IN LENGTH

I NAME WAS LYING ON HIS SIDE ON TOP OF THE CONTINUOUS MINER ATTEMPTING TO PRY A RIPPER MTOR FROM ITS BASE WHEN HE FELT A BURNING SENSATION IN HIS BACK

WHILE THE EMPLOYEE WAS REPOSITIONING THE CANOPY PIN ON THE UNAHAULER WITH A HAMMER A PIECE OF METAL WENT INTO HIS LEFT INDEX FINGER THE EMPLOYEE DID NOT MISS WORK UNTIL 10-01-90 & RETURNED 10- 02-90

MAKING BELT SPLICE RELEASED ONE OF RED DEVIL HOIST, HANDLE SLIPPED CAUGHT IN RELEASE MECHANISM

EMPL WAS REMOVING BOLTS IN ELECTRICAL PANEL OF 20SC SHUTTLE CAR. WHEN BOLT HE WAS ATTEMPTING TO REMOVE BROKE LOOSE SOONER THAN HE EXPECTED THUS CAUSING HIM TO SUDDENLY TWIST STRAINING LOWER BA CK.

WHILE HE WAS HELPING TO MAKE A SHUTTLE CAR SPLICE, HE CUT HIS LEFT HAND.

EMPL CUTTING CONVEYOR BELT MAKING A SPLICE.AS HE CUT,KNIFE SLIPPED AND CUT SMALL FINGER RIGHT HAND.REPORTABILITY-QUESTIONABLE.SAFETY DEPT RECD INFO 10-18-89.

WHILE HE WAS HELPING MAKE A SPLICE IN THE POWER CABLE OF THE CONTINUOUS MINING MACHINE, HE CUT HIS LEFT HAND.

I.NAME WAS HOLDING A BAR WHILE ANOTHER EMPLOYEE WAS HITTING IT WITH A HAMMER. THE HAMMER GLANCED FROM THE BAR STRIKING THE INJURED'S THUMB ON HIS RIGHT HAND. *NOTE THE SAFETY DEPT. DID NOT REC EIVE INFORMATION ABOUT ACCIDENT UNTIL 8/14/89.

WHILE I NAME WAS ATTEPTING TO BREAK A BOLT LOOSE WHEN HIS RATCH D SLIPPED CAUSING HIM TO HIT HIS HAND ON A WATE HOSE CLAMP THIS CAUSED AN OPEN WOUND TO HIS L HAND NOTE THE SAFETY DEPT DID NOT RECEIVE NOTICE OF THIS ACCIDENT UNTIL 8/7/89 WHEN I NAME RETURNED TO WORK

WHILE I.NAME WAS USING A HAMMER AND CHISLE TO KNOCK OFF A BEARING RACE, A PIECE OF METAL HIT HIM IN THE LEFT EYE.

THE INJURED WAS IN THE PROCESS OF TIGHTENING UP CRIBS WITH A HAMMER WHEN HE STRUCK HIMSELF ON HIS LEFT ANKLE.

I,NAME WAS INSTALLING A BREAKER BOX ON THE CONTINOUOUS MINING MACHINE WHEN HE STRUCK HIS THUMB WITH A HAMMER.

THE INJURED WAS USING A BAR TO PRY THE CAT PADS BACK ON A CONTINUOUS MINER WHEN THE BAR SLIPPED CAUSING HIM PAIN IN HIS UPPER BACK.A BURNING SENSATION.

EMPLOYEE WAS US3NG A RAILROAD JACK ON A BELT HEAD, WHEN THE SLATE BAR HANDLE SLIPPED AND HIT HIS HEAD.

EMPLOYEE WAS MA5ING A CABLE SPLICE ON THE ROOF BOLTER WHEN HE CUT THE LITTLE FINGER ON HIS RIGHT HAND.(NO LOST TIME).

EMPLOYEE WAS H 9LPING ON A BELT MOVE HE LIFTED ON A SLATE BAR TO RAISE THE BOTTOM STRUCTURE & SDSTRAINED HIS BACK NOTE HE STARTED TO MISS WORK ON 100787

SCALING TOP IN 0ACE AREA WITH A SLATE BAR AND STRAINED MUSCLE IN HIS LEFT SIDE.

THE EMPLOYEE WA8 SETTING ON A SUPPLY CAR CONTAINING ROCK DUSTER. THE EMPLYEE WAS TIGHTENING BOLTS ON THE TOP CAP OF THE ROCK DUSTER, WHEN THE WRENCH HE WAS USING TO TIGHTEN THE BOLTS, SLIPPED OFF THE BOTTOM3AND CAUSED HIM T O FALL OFF THE SUPPLY CAR ON TOTHE BOTTOM AND CUTTING HIS RIGHT SMALL FINGER AND INJURING HIS LEFT HIP.

EMPL MAKING CABLE SPLICE WHEN HE CAUGHT FINGER IN CUTTER.

I.NAME WAS SETTING BITS IN LEE NORSE MINER USING AXE TO TAKE BITS OUT

I.NAME WAS TAKING DOWN SLATE WITH SLATE BAR IN FACE OF #4 ROOM WHEN SLATE CAME DOWN BAR FELL PUTTING PRESSURE ON RIGHT WRIST.

GREENE WAS TIGHTENING UP BIT LUGS ON MINER SOCKET SLIPPED OFF CAUSING INJURED TO STRIKE HIS RIGHT KNEE AGAINST BIT ON RIPPER CHAIN

EMPLOYEE WAS TIGHTENING A NUT WITH A WRENCH WHEN HE CAUGHT HIS LEFT HAND BETWEEN THE WRENCH AND THE FRAME OF THE MACHINE, CAUSING A LACERATION TO THE PALM OF HIS HAND

EMP WAS USING SLEDGHAMMER TO STRAIGHTEN A PIECE OF METAL WHEN THE HAMMER BOUNCED AND STRUCK HIS KNEE HE SUFFERED A BRUISE TO KNEE

GOODWIN WAS TAKING LUG BOLTS OFF OF THE WHEEL OF A 45 MACK TRUCK-USING A "CHEATER PIPE AND EITHER STRAINED OR PULLED MUSCLES IN LOWER RIGHT BACK.