Buscar en el registro

While driving in a bogey pin into a D-10 bogey on a side frame, using a sledge hammer the victim partially struck the track frame which caused him to strike himself in the lower right leg. This was a struck by injury. He was treated and released.

While placing a pull cable on a D11 Dozer, miner said he felt a pain in the upper inside of right leg (groin area). Miner did not seek treatment until 3/18/10 in ER, for soreness and discoloration of affected area.

EMPLOYEE WAS CHANGING A BEARING & WHEN HE WAS SWINGING THE SLEDGE HAMMER, IT CAUGHT ON HIS UPPER LEG CAUSING THE HAMMER TO MISS THE BEARING & HIT HIS LT. HAND. HE WENT TO THE HOSPITAL & IT WAS DETERMINED THAT NOTHING WAS BROKEN BUT THE HAND DID HURT & WAS BRUISED & SWOLLEN.

MECHANIC WAS LEANING ON A S FT PINCH BAR TO LINE UP CAB SUPPORT ON A CAT D9H DOZER. THE BAR SLIPPED AND MECHANIC FELL TO GROUND LANDING ON HIS RIGHT ARM AND SHOULDER.

EMPLOYEE WAS REMOVING BURRS FROMA PIECE OF STEELWITH A CHIPPING HAMMER, WHEN A SLIVER OF STEEL FLEW OFF AND LODGED ITSELF INTO THE BACK OF THE LEFT THUMB. EMPLOYEE WAS WEARING WORKING GLOVES A T THE TIME OFTHIS INCIDENT.

EE WAS DRIVING BEARING INTO THE FINAL DRIVE WITH HAMMER AND PUNCH. HIT PUNCH, HAMMER SLIPPED OFF AND PUNCH HIT LEFT HAND, CUTTING PALM OF LEFT HAND.

EE WAS ASSISTING ANOTHER EE REPAIR AN UNDERCARRIAGE. THE OTHER EE WAS USING A SLEDGEHAMMER TO DRIVE A BUSHING INTO THE TRACK RAIL. A PIECE OF METAL FLEW OFF THE BUSHING AND STRUCK EE IN THE LE FT FOREARM AND REMAINED LODGED UNDER HIS SKIN ABOUT 1-1-1/2" DEEP. DR. REMOVED PIECE OF METAL AND REPAIRIED CUT WITH 3 SUTURES.

EE WAS USING A SLEDGEHAMMER TO REPAIR A CONVEYOR WHEN HE INADVERTENTLY STRUCK HIS FINGER WITH THE HAMMER.

EE WAS TRYING TO REMOVE A BUCKET TOOTH FROM A CAT 980 LOADER. HE WA USING A HAMMER TRYING TO LOOSEN THE TOOTH WHEN A PIECE OF METAL BROKE LOOSE AND HIT HIM IN THE STOMACH. 1/4" PIECE OF METAL LODGED IN HIS STOMACH AND NEEDED TO BE SURGICALLYREMOVED ON AN OUTPATIENT BASIS.

EE WAS HITTING AN AXLE WITH A HAMMER TO REMOVE U-JOINT WHEN A SMALL CHIP OF METAL FROM THE AXLE CAME OFF AND LODGED ITSELF INTO EE'S WRIST.

EE WAS REMOVING FINAL DRIVE PLUG WITH A 3/4" RATCHET WHEN THE PLUG SUDDENLY BECAME LOOSE PINCHING HIS HAND BETWEEN RATCHET HANDLE AND THE FINAL DRIVE HOUSING.

EE WAS ASSISTING ANOTHER MECHANIC IN REMOVING THE LINERS FROM AN ENGINE BLOCK. EE WAS HOLDING A PIPE WHILE THE OTHER MECHANIC HIT IT WITH A SLEDGEHAMMER. THE SLEDGEHAMMER HIT THE PIPE OFF CENT ER CAUSING IT TO SHOVED INTO THE SIDE OF THE BLOCK AND PINCHING EE'S THUMB. THE CONTUSION WAS REPAIRED WITH 3 SUTURES.

EE WAS INSTALLING A PISTON IN AN ENGINE WHEN THE RING COMPRESSOR HE WAS WORKING WITH SLIPPED OUT OF HU HAND AND THE SHARP METAL BAND ON THE TOOL CUT HIS HAND. THE CUT REQUIRED 4 SUTURES.

EMPL WAS REPAIRING SET OF TRACKS ON D9 DOZER. HE WAS HAMMERING SEGMENT WHEN PIECE OF STEEL CHIPPED OFF & LOOSED DEEPLY INTO LEFT FOREARM.

EMPLOYEE WAS REPAIRING AN AIR LINE END WHEN CUTTING IT THE KNIFE SLIPPED AND SLICED THE BACK OF HIS RIGHT HAND.HE WAS TAKEN TO THE HOSPITAL AND RECEIVED 5 STITCHES AND WAS BACK TO WORK IN 45 M INUTES.

EMPLOYEE WAS HITTING A BRASS PUNCH WITH A SLEDGE HAMMER.DUE TO THE FACT THAT NO ONE WAS HOLDING ONTO THE PUNCH OT SHOT OUT FROM UNDER THE SLEDGE WHEN IT WAS STRUCK AND HIT THE EMPLOYEE IN THE RIGHT LEG CAUSING A LACERATION WHICH NEEDED SUTURING

HE WAS USING A HAMMER TO REPAIR THE PAN ON THE AUGER MACHINE WHEN THE HAMMER SLIPPED AND HE HIT HIS FINGER ON THE MACHINE.

I.NAME WAS IN T2E PROCESS OF RETRIEVING AN AUGER HEAD THAT WAS STUCK IN THE AUGER HOLE HE WAS USING A 1 1/4 IN STEEL CABLE ALL MORNING BECAUSE OF THE WEIGHT OF THE CABLE AND I.NAMES ALWAYS STO OPING AND BENDI3G OVER HE DEVELOPED A SORE BACK

TIGHTENING BOLT3ABOVE HEAD ON BOOM OF AUGER WHEN RATCHET SLIPPED AND HE PULLED MUSCLE IN RIGHT UPPER ARM.

EMPL WELDING ON AUGER HEAD IN YARD AREA NEEDED TO TURN IT AND WAS USING PRY BAR AND JIG.STRAINED HIMSELF TRYING TO ACCOMPLISH THIS.

SING A HYDRAULIC JACK TO STRAIGHTEN A PIECE OF STEEL THE JACK SLIPPED AND HIT HIM IN THE ARM.

OPERATOR WAS CLEANING OUT TRACKS - WHILE SHOVELING WITH TRACK SPADE HE FELT A SHARP PAIN IN HIS BACK / NO FALLING - SLIPPING OR T RIPPING OCCURRED