Buscar en el registro

A PIECE OF METAL BROKE OFF HAMMER WHILE TEARING OVERCAST OUT & HIT UPPER LEFT ARM.

EE WAS PUTTING PIN IN CUTTER CHAIN ON MINER AND HE HIT PIN WITH HAMMER AND A PIECE OF STEEL STRUCK HIM IN THE LEFT FOREARM.

NEXT TO BELT LINE AND BELT SPLICE WENT BY A NEEDLE HIT SOMETHING AND THREW A FOREIGN.

HE WAS REPAIRING A CUTTER CHAIN ON A JEFFREY 101 MINER WHEN A SMALL PIECE OF METAL HIT HIM ON THE TOP SIDE OF HIS RIGHT WRIST.

EMPLOYEE WAS CHANGING A BRAKE SHOE ON RR CAR WHEN THE BAR SLIPPED AND PINNED HIS FINGER BETWEEN THE SIDE OF THE CAR AND THE BAR.

EMPL WAS SHEARING LONG STRIP OF METAL INTO SMALLER PIECES WHEN HE WENT TO SHEAR METAL KNIFE CAME DOWN FLIPPING METAL UP IN AIR & IT CAME DOWN ON THUMB.

HE WAS JACKING MOTOR ON THE TRACK AND STRAINED HIMSELF.

JACKING SUPPLY CAR ON AND MASHED HIS FINGER WITH THE LIFTING JACK-RING FINGER ON RIGHT HAND.

EMPLOYEE WAS USING A RAILROAD JACK-RAISING A CONVEYOR BELT.HE CAUGHT HIS FINGER WHEN HE TRIPPED THE JACK TO LOWER IT.

ON 12-10-90 HE WAS KNOCKING A BIT OUT OF CUTTER HEAD CHAIN AND A PIECE OF METAL OFF THE BIT WRENCH CUT HIS RIGHT INDEX FINGER.HE DID NOT GO TO THE DOCTOR OR MISS ANY WORK AT THAT TIME,HOWEVER ON 01-21-91 HIS FINGER BECAME BADLY INFECTED ANDHE WAS ADMITTED TO THE HOSPITAL FOR 1 NIGHT FOR SURGICAL REPAIR OF THIS FINGER.ACCIDENT HAPPENED AT FACE.

HIT TAIL ROLLER ON #3 BELT WHILE SHOVELING TAILPIECE.HURT LEFT FOOT #3 HEAD DRIVE.

HE WAS JACKING HEAD DRIVE UP. JACK BROKE, BAR HIT HIM ON LEFT JAW. 400-B SECTION AT FACE.

EMPLOYEE WAS LOOSENING A BOLT ON CLAMP ON REFUSE LINE TO REMOVE SECTION. A 1 5/8" WRENCH WAS B EING USED. WHEN THE BOXED END OF THE WRENCH BROKE, HE FELL OVER EDGE OF CONCRETE PAD, HITTING HIS RIGHT SHOULDER AND LOWER BACK.

LET SCOOP DOWN ON FOOT ONE BREAK BELOW TAIL PIECE

PUTTING TIRE ON SCOOP METAL FLEW IN R EYE IMBEDDED THERE AT FACE OF A SECTION

HE HIT THE LEFT SIDE OF HEAD ON A STRAP AND CUT IT HAPENED AT FACE 4 ENTRY.

WAS WORKING ON SHUTTLE CAR USING CHAIN HOIST WHEN PIECE OF METAL BROE THAT WS WELDED & HIT HIM IN HEAD ON LEFT SIDE CLOSE TO EYE.

EMPLS WERE IN PROCESS OF REMOVING 117 PUMP. PIECE OF I BEAM NEEDED TO BE CUT OUT TO ALLOW PUMP ENOUGH LCEARENCE TO COME OUT. EMPL CUT I BEAM WITH TORCH BUT SLAG WAS PREVENTING BEAM FRO MCOING OUT. HE TOOK PIECE OF 2X2 ANGLE TO FINISH BREAKING BEAM LOOSE & WHEN IT CAME LOOSE BEAM HAD PRESSURE ON IT & THREW ANLGE BACK AT HIM STIKING HIM IN RIGHT EYE.

EMPLOYEE WAS OPENING A DOOR ON A CSX CAR, WHEN THE BAR SLIPPED OUT HITTING HIM ON HIS GLASSES CAUSING A LACERATION ON HIS NOSE AND NUMBNESS TO HIS FACE.

EMPLOYEE WAS CLEANING OUT UNDER BELT WITH SHOVEL. EMPLOYEE DEVELOPED AN IRRITATION IN LEFT EYE.

CUT PALM OF RIGHT HAND AND RIGHT RING FINGER WITH KNIFE WILE INSTALLING BRATTICE CURTAINS IN FACE OF MINE.

WAS HITTING APUNCH WITH A HAMMER AND MISSED AND HIT HIS LEFT HAND HAPPENED IN #3 ENTRY - LAST CROSS CUT.

WAS BREAKING BOLT LOOSE UNDER TRUCK AND TWISTED HIS RIGHT SHOULDER. HAPPENED IN 405 TRUCK GARAGE.

EMPL SECTION FOREMAN WAS CRAWLING ALONGSIDE 101 CONTINUOUS MINER. CONTINUOS MINER OPERATR WAS SETTING BITS USING SHARP HAMMER. PIECE OF HAMMER STEEL CAMME OFF STRIKING EMPL IN LEFT EYE.

EMPLOYEE WAS LIFTING CONVEYOR BELT WITH A SLAT BAR AND STRAINED HIS BACK. THIS ACCIDENT OCCURRED AT THE FACE OF THE MINE.

EMPLOYEE WAS IN THE PROCESS OF TRYING TO MOVE A CALGON TANK WITH A 2 INCH NIPPLE ON THE BOTTOM OF IT. IN TRYING TO CLEAR THE NIPPLE THE EMPLOYEE WAS PULLING A PIECE OF CONDUIT. I NAME WAS USI NG A SLATE BAR TRYING TO WALK THE TANK UNDER THE CONDUIT THE TANK JUMPED AND CAUGHT HIS THUMB BETWEEN THE 2 INCH PIPE AND THE FLOOR.

CHANGING BULBS IN CAPLIGHT AND TAKING SCREW OUT WIHT KNIFE AND BLADE CLOSED UP A(D CUT R. FINGER.

I.NAME AND I.NAME WERE PUTTING A COUPLING ON THE REFUSE LINE I.NAME PRESSED THE COUPLING DOWN WITH HIS HAND JUST AS I.NAME HIT IT WITH A HAMMER COUSING A CONTUSION TO THE LEFT RING FINGER ON I.NAMES HAND

HE WAS USING A CHAIN HOIST TO LIFT A #4 SCREEN. HE PULLED A MUSCLE IN LEFT SIDE OF CHEST AND UPPER ARM. MAY HAVE BURST A VEIN IN HIS CHEST.

EMPLOYEE WAS USING A HAMMER TO PULL BELT NEEDLE, WHEN A PIECE OF HAMMER FLEW OFF AND HIT HIM IN LEFT ARM.

EMPLOYEE WAS HITTING ON A CUTTER CHAIN PIN WHEN A PIECE OF METAL FLEW OFF AND HIT HIM IN EYE.

EMPLOYEE WAS LOOSENING BOLT ON BIT LUG ON MINER AND FELT PAIN IN HIS RIGHT SIDE.

EMPLOYEE WAS HITTING CHISEL WITH A HAMMER AND MUSSED AND HIT HAND HAMMER.

EMPL WAS PRYING THE COLLARS BACK ON THE FOOT SHAFT OF A CM WHIT A SLATE BAR AND THE BAR SLIPPED AND HIT HIS LEG AGAINST THE BITS

ANOTHER EMPLOYEE WAS WORKING ON THE EDGE OF SIDE OF ROOF BOLTER AND WAS USING A BALL HAMMER WITH GREASY HANDS AND WHEN THIS EMPLOYEE STRUCK AT THE OBJECT IT FLEW OUT OF HIS HANDS AND HIT HIM I N HEAD.

WAS BEATING UP ROCK ON BELT LINE AND PUTTING IT ON BELT

EMPLOYEE WAS PUSHING BELT LINE WITH MINER AND STRUCTURE BOWED UP AND EMPLOYEE TRIED TO STRAIGHTEN IT WITH A SLATE BAR AND SLATE BAR SLIPPED AND HIT HAND.

HE WAS TRYING TO UNSTOP CLOGGED AIRPORT ON TANK OF 81 MACK TRUCK WITH WIRE & WHEN IT UNSTOPPED IT. IT BLEW RUST & DIRT INTO HAND.

WAS CLEANING UP #2 BELT LINE AND HIT HIS ELBOW AGAINST A TIMBER

WAS SHOVELING BELT AND TWISTED BACK

WAS PUTTING GEARS ON LEFT SIDE OF 2 HEADDRIVE. WAS HITTING GEARS WITHSLEDGEHAMMER AND CAUGHT THUMB WITH SLEDGEHAMMER.

EMPLOYEE WAS CUTTING TOP OF HYDRAULIC OIL CAN WITH A KNIFE AND KNIFE SLIPPED AND CUT FINGER.

EMPLOYEE WAS KNOCKING ROCK OUT OF HEAD DRIVE AND HIT HAND AGAINST TOP.

WAS CLOSING KNIFE AND CUT RIGHT INDEX FINGER.

WAS WELDING AND STARTED TO CHIP SLAG OFF AND SLAG ENTERED LEFT EYE

WAS CUTTING BOLTS WITH COLE CHISLE AND HAMMER WHEN NUT WAS CUT OFF THE FORCE OF THE HAMMER FORCED THUMB DOWN ON SCOOP FRAME

I NAME AND I NAME WERE TRYING TO PUT A WRIST PIN IN A POISTON USING A BAR TO L INE UP THE HOLE. I NAME WAS ON ONE END AND I NAME ON THE OHTER END, I NAME PUT HIS H AND IN THE PISTON TO S E SEE HOW FAR OFF THEY WERE, JUST AS I NAME PRIZED THE PIN WITH THE BAR

EMP WAS CLOSING A RAIL ROAD CAR DOOR WITH A BAR. HE CAUGHT HIS FINGERS BETWEEN THE CAR AND THE BAR

WAS ATTEMPTING 7O LOOSE A ROOF BOLT WITH A 15 IN CRESENT WRENCH AND HAD A SHARP PAIN IN HIS BACK

WAS ON SECTION 5T FACE ON HIS KNEES SPLICING CABLE & TURNED HIS UPPER BODY & PULLED SOMETHING IN H IS LOWER BACK