Buscar en el registro

EE WAS OPENING CONTAINER 2/ UTILITY KNIFE--KNIFE SLIPPED & CUT LEG. 3 SUTURES.

HAMMERING METAL AND PIECE OF STEEL SHATTERED AND ENTERED R. HAND.

EMPLOYEE WAS TIGHTENING ROOF BOLT ON SUPPLY RD.AREA WITH SOCKET AND WRENCH.

WHILE SETTING ROOF JACK, SMALL ROCK FELL ON ARM.

HIT FINGER W/HAMMER

HAMMERING METAL WHEN PIECE BROKE OFF & STUCK IN LEG

EMPLOYEE WAS ALIGNING A BELT ROLLER WHEN HE HIT HIS HAND WITH A HAMMER.

WHILE HAMMERING W/ CHISEL, CHESIL SLIPPED STRIKING LEFT HAND.

PIECE OF STEEL IN EYE-HAMMERRING METAL.

EE WAS INSTRUCTING THE MECHANIC, ON HIS NEXT JOB DUTY. AS MECHANIC WAS STRIKING A PIECE OF STEEL WITH A HAMMER A PIECE OF STEEL IMBEDDED IN EE'S EAR.

EE WAS REPAIRING A DRYER BASKET IN THE PREP PLANT. WHILE REMOVING A METAL BOLTY WITH A HAMMER & CHISEL, THE CHISEL SLIPPED AND HIT HIM IN HIS EYE. SAFTETY EQUIPMENT WAS PROVIDED BY THE EMPLOYE R (SAFETY GLASSES). THE EE STATED THAT HE REMOVED THEM BECXAUSE THEY WERE FOGGIN UP.

WHILE PULLING ROCK DOWN FORM ROOF, PRY BAR CAME BACK AND STRUCK FINGER (L-INDEX) (SUTURES).

STRAINED BACK WHILE UNCOUPLING TRAILER (PRYING WITH BAR)

KNOCKING BROKEN CONT. MINER BIT OUT WITH HAMMER & STRUCK THUMB.

WHILE CUTTING CONVEYOR BELT W/ UTILITY KNIFE, KNIFE SLIPPED CUTTING LEFT LEG.

VICTIM WAS STRIKING CHISEL W/HAMMER WHEN STEEL BROKE OFF AND LODGED IN HAND.

VICTIM WAS KNOCKING COUPLING OFF WATER LINE WITHOLD BELT ROLLER WHEN HE STRUCK FINGER.

VICTIM WAS CUTTING BELT WITH UTILITY KNIFE WHEN KNIFE SLIPPED, CUTTING LEFT ARM APPROX. 1".

VICTIM WAS PULLING ON PIECE OF CURTAIN WHILE CUTTING IT LOOSE WHEN CURTAIN WAS CUT LOOSE, HIS HAND WENT BACK AND STRUCK SCOOP.

HOLDING CHAIN WITH LEFT HAND CUTTING TAPE OFF OF CHAIN- KNIFE SLIPPED CUTTING FINGER.

THE EE WAS CUTTING WORN MATERIAL FROM THE BELT ON THE CONVEYOR SYSTEM. THE BELT KNIFE SLIPPED AND CUT HIS FINGER ON HIS LEFT HAND.

THE EMPLOYEE WAS CLEANING THE RUST OFF OF METAL GOB BUCKETS IN THE PREPARATION PLANT. HE WAS USING A METAL SCRAPER AND WIRE BRUSH TO REMOVE THE RUST. THE EMPLOYEE STATED HE WAS WEARING SAFETY GOGGLES, BUT LATER THAT NIGHT 3-19-94 HIS EYE BEGAN TO HURT. ON 3-20-94 THE EMPLOYEE WENT TO THE EMERGENCY ROOM AND HAD A SMALL PIECE OF METAL REMOVED.

WORKING ON 1250 DRAGLINE, USING 20 LB SLEDGE HAMMER HIT A CABLE HOOK HAMMER GLANCED OFF THE HOOK HITTING HIM ON THE RIGHT SHIN.

TIGHTENING BOLTS ON 992 HOIST CLY & PULLED MUSCLE IN ARM. ALSO PAIN IN RIGHT HAND.

68935 INSTALLING EQUALIZER PIN ON A D9L BULLDOZER, SLEDGEHAMMER STRUCK THE PIN, CAUSING A PIECE OF METAL TO STRIKE HIS LEFT LEG- PUNCTURE WOUND.

WORKING ON R-85 TRUCK BED, GOT METAL IN EYE.

HELPING PUT REAR END OF TRUCK AND HOOK BROKE IT HIT IN CHEST AND HEAD AND NECK

EE WAS TRYING TO PRY A ROCK ON THE FEEDER LOOSE AND THE ROCK FELL ON HIS FOOT.

TAKING OFF COUPLING FROM DRILL STEEL EMPLOYEE WAS TRYING TO KNOCK OFF COUPLING WITH A HAMMER,AND A SMALL PIECE OF STEEL BROKE OFF COUPLING AND WENT IN THE EYE.

THE EE WAS TURNING THE HANDLE ON A WINCH TO MOVE THE STACKER BELT TO A NEW LOCATION. THE WINCH INCREASED IN TENSION AND WHEN HE RELEASED THE BRAKE THE HANDLE HIT HIS RIGHT THUMB.

EMPL INJURED ELBOW ON 9/21 WHILE PULLING LARGE SOCKET WRENCH & FELT BURNING PAIN IN RIGHT ELBOW SINCE ONSET HE HAS HAD WAXING & BURNING PAIN IN SAME LOCATION. HE CONTINUED TO WORK UNTIL 11/ 05 WITHOUT DIFFICULTY. HE WAS EXAMNED BY DR

INJURED WAS HAVING TROUBLE REMOVING A DRILL STEEL AND COUPLING ON THE DRILL'S ASSENT. HE BEGAN HAMMERING THE COUPLING. A PIECE OF STEEL WAS KNOCKED OFF AND LODGED IN THE EMPLOYEE'S RIGHT HAN D.

EMPL USING PRY BAR TO OPEN & CLOSE DOORS ON TRAIN WE WERE ABOUT TO LOAD.

EMPLOYEE WAS DRIVING A PIN OUT OF 245 BACKHOE WITH A SLEDGEHAMMER AND WEDGE MAUL UPON HITTING THE WEDGE WITH THE SLEDGEHAMMER A PIECE OF THE STEEL WEDGE CAME OFF AND PRICED HIS LEFT KNEE.

EMPLOYEE WAS HO5DING A STEEL CABLE THAT WAS ATTACHED TO THE CLAM SHELL ON A DRAGLINE.EMPLOYEE WAS INJURED WHEN ANOTHER EMPLOYEE REMOVED A PIN WITH A HAMMER,WHICH HELD THE CABLE TO THE CLAM SHE LL. THE CABLE S1RUNG STRIKING EMPLOYEE.