Buscar en el registro

EMPLOYEE WAS HE5PING HOIST METAL INTO CRUSHER LEVEL OF PLANT. WHILE HOISTING METAL, THE WIRE ROPE BROKE FROM THE MANUAL WINCH STRIKING EMPLOYEE S HAND.

EMP WAS REMOVIN1 A BIT FROM A DRILL WITH A SCREWDRIVER WHEN A PIECE OF THE SCREWDRIVER BROKE OFF AND WENT INTO EMPLOYEES EYE

EMPLOYEE STRUCK3HIS THUMB WITH A SLEDGE HAMMER WHILE REPAIRING A TIE ROD ON A ROCK TRUCK

EMPLOYEE WAS US3NG A HAMMER TO ALIGN A MECHANICAL PART INTO PLACE WHILE USING HAMMER EMPLOYEE STRUCK HIS WRIST

EMPLOYEE WAS US3NG A RATCHET TO TIGHTEN BOLTS ON A MOTOR THE RATCHET SLIPPED AND CAUSED EMPLOYEE TO FALL BACKWARDS ONTO HIS ARM

SLEDGE HAMMER H9AD CAME OFF CAUSING EMP HANDS TO HIT FRONT IDLER HUB ON THE BE SHOVEL LACERATING HIS RT THUMB

EMPLOYEE WAS TH9OWN FROM ENDLOADER BUCKET AFTER HE KNOCKED A PIN FORM THE BUCKET.

EMPL STRIKING B9D PIN WITH 10 LB HAMMER AND HURT NECK.

LOYEE FELL BACK4ARDS ON WOODEN TIE WHEN HAMMER WHICH WAS STICKING IN THE TIE SLIPPED

EMPLOYEE WAS US3NG A HAMMER TO LOOSEN A STUCK PART.WHILE USING HAMMER,EMPLOYEE STRUCK HIS MIDDLEFINGER WITH THE HAMMER.

EMPLOYEE WAS CH5NGING DRILL STEEL CHAIN WHEN WRENCH HE WAS USING FLEW BACK AND HIT HIS RIGHT LEG.

EMPL USNING WRENCH TO LOOSEN NUT FROM A BOLT.WHILE LOOSENING THE NUT,WRENCH SLIPPED ALLOWING EMPL THUMB TO STRIKE ALTERNATOR FAN BLADE.

EMPL FELL OFF DOZER ONTO CONCRETE FLOOR WHEN WRENCH SLIPPED FROM BOLT.

WHILE MAKING A PULL CABLE, VISE-GRIPS SLIPPED OFF CABLE STRIKING EMPLOYEE ABOVE LEFT EYE

SLEDGE HAMMER HANDLE BROKE WHILE PREPARING TO STRIKE DRIVE SPROCKET CAUSING EMPLOYEES HANDS TO HIT SPROCKET

EMPLOYEE WAS USING A METAL BAR TO INSTALL DOZER TRACKS. WHILE INSTALLING TRACKS, THE BAR SLIPPED CAUSING EMPLOYEE TO TWIST HIS ANKLE.

EMPLOYEE WAS USING A HAMMER TO DRIVE A LINK ONTO DRILL CHAIN. WHILE DRIVING LINK A SILVER OF METAL STRUCK EMPLOYEE IN THE FINGER.

EMPLOYEE WAS USING A WRENCH TO TIGHTENING THE CONNECTION, THE WRENCH SLIPPED ALLOWING HAND TO STRIKE METAL OBJECT.

THE EMPLOYEE WAS DRIVING A NAIL INTO A BACK BOARD FORA FEEDER AND HIT HIS LEFT THUMB WITH THE HAMMER.

EMP WAS USING PRY BAR TO INSTALL A TRACK ON A DRILL THE BAR SLIPPED CAUSING EMP TO TWIST BACKWARDS AND FALL ON HIS LEG CAUSING IT TO BREAK

EMPLOYEE WAS TIGHTENING PACKING GLAND ON MINER WHEN WRENCH SLIPPED CAUSING HIM TO FALL ON MINE FLOOR

USING KNIFE TO CUT TO A PIECE OF ROPE.

EMPLOYEE WAS TIGHTENING A BOLT WITH A RATIO WRENCH AND A 1" RATCHET WHEN THE BOLT BROKE AND THE RATIO WRENCH STRUCK HIM ON THE LEFT HAND

EMPLOYEE WAS PUTTING ON CHAIN LINK IN THE DRIVE CHAIN AT THE 3A DUMP FEEDER AND STGRUCK HIS LEFT THUMB WITH A HAMMER

EMPLOYEE WAS USING A WRENCH TO TIGHTEN A CONNECTION AT THE END OF THE ELECTRICAL CABLE. WHILE TIGHTENING THE CONNECTION, THE WRENCH SLIPPED STRIKING EMPLOYEE IN THE MOUTH

EMP WAS USING A HAMMER AND PUNCH TO DRIVE A PIN FROM BUSHING WHILE DRIVING THE PIN A SLIVER OF METAL STRUCK AND EMBEDDED IN EMPLOYEES FINGER

STRUCK IN LEG BY SLEDGE HAMMER WHICH GLANCED FROM LOADER BUCKET HE WAS WORKING OON.

STRIKING CONVEYOR CHAIN ON MINER WITH A HAMMER. A PIECE OF METAL STRUCK HIM I N RIGHT EYE.

TIGHTENING BRAKE ON RAILROAD CAR AND STRAINED SHOULDER.

EMPLOYEE DROPPED A HAMMER ONTO HIS FOOT WHILE INSTALLING A CHAIN ON A DRILL MAST

TIGHTENING BOLT ON ROLLER BEARING ON BELT DRIVE,WRENCH SLIPPED AND WRENCH HIT RIGHT WRIST.

LIFTED UP ON BAR TRYING TO PICK MOTOR UP AND HURT BACK

JACKING ON WRECKED MAN BUS WHEN JACK KICKED OUT AND CAUGHT FINGER BETWEEN JACK BAR AND BOTTOM

LIFTING RIPPER TOOTH WITH 1/4\\ CHAIN,HOOK BROKE AND CHAIN STRUCK EMPL IN FOREHEAD.

EMPLOYEE WAS ASSISTING IN REMOVING A SHAFT FROM THE STRIPPING SHOVEL WHILE REMOVING SHAFT THE CAHIN BROKE STRIKING THE EMPLOYEE ON THE KNEE

CANOPY BOOM WAS FOULED ON ROOFBOLTER.EMPL FREED IT WITH SLATE BAR CAUSING IT TO DROP ON FINGER.S

EMPLOYEE WAS RAISING MINER WITH LIFTING JACK AND BAR BROKE

EMPLOYEE HIT HIS HAND WITH A HAMMER WHILE REPLACING A SPRING ON A MACK TRUCK

PUTTING ANCHOR STANDS UP IN THE TOP AND WRENCH BROKE ANCHOR STAND FELL