Buscar en el registro

WAS ADJUSTING TAIL PULLEY, RATCHET SLIPPED. HIT HAND ON METAL FRAME.

1" DRIVE RATCHET SWUNG BACKWARDS & HIT HAND.

INSTALLING A BUCKET TOOTH ON CAT 988B LOADER. HE WAS HITTING IT WITH A HAMMER AND A PIECE OF METAL BROKE OFF AND HIT HIM IN THE ARM AND WAS IMBEDDED THERE.

EE WAS TRYNG TO KNOCK PIN OUTOF BUCKET TOOTH & A PIECE OF METAL FLEW OUT & HIT HIM INTHE LEFTLOWER LEG

EE WAS TRYING TO KNOCK LOADER BUCKET TOOTH PIN OUT WITH A SLEDGE HAMMER A PIECE OF METAL FLEW UP & HIT HIM IN THE LEFT SIDE OF CHEST

EE DROPPED A LARGE WRENCH IN THE MUD WHILE WEARING SAFETY GLASSES & MUD SPLASHED INTO EYE UNDER GLASSES

IT WAS KIND OF DARK, MUDDY & SNOWING. EE WAS TRYING TO CLEAN OUT THE SCREENS ON COAL CRUSHER WITH A PRY BAR & HIS HAND SLIPPED, SMASHING HIS FINGER BETWEEN CRUSHER & BAR.

EMPLOYEE WAS REMOVING OBSTRUCTION FROM CRUSHER CHUTE WHEN MATERIAL DISLODGED AND MASHED HIS LEFTRING FINGER AND BROKE THE TIP.

EE WAS HAMMERING CHAIN LINK INTO PULL DOQN CHAIN ON GARDNER DENVER DRILL, WHEN METAL BROKE OFF LINK LODGING INTO LEFT PALM, BETWEEN THUMB AND FIRST FINGER.

EMP GOT RIGHT HAND FINGERTIPS SMASHED BETWEEN STRUT & FRAME WHILE DISASSEMBLING AN R100 END DUMPFRACTURE TO BOTH FINGERTIPS & REQUIRED 4 STITCHES TO MIDDLE FINGERTIP.

EMPLOYEE WAS PUTTING IN A KEEPER ON A TOOTHPOINT FOR A 2570 DRAGLINE BUCKET. AS THE KEEPER WAS STRUCK WITH THE HAMMER, A PIECE BROKE OFF, STRIKING EMPLOYEE IN THE FOREARM.

EMPLOYEE WAS ASSISTING IN REPLACING TOOTH POINTS ON A 2570 DRAGLINE BUCKET WHEN EMPLOYEE HIT THE TIP KEEPER WITH A SLEDGE HAMMER A PIECE GBROKE OFF THE KEEPER & STRUCK EMPLOYEE IN ARM THE PIEC E OF METAL WAS ABOUT 1/2INCH LONG EMPLOYEE SAID HE HIT THE KEEPER SQUARE

EE WAS TIGHTENING THE LEFT REAR WHEEL ON THE MACK TRUCK MODEL P-28. THE FOUR WAY WRENCH SLIPPED CAUSING EE TO FALL AND BREAKING HIS RIGHT LEG. THE TRUCK WAS ON FLAT DRY GROUND.

EMPLOYEE WAS HELPING TO REPLACE A BELLY PAN. THE PAN HAD BEEN DOUBLE CHAINED TO THE BOOM OF THE WORK TRUCK. EMPLOYEE WAS USING A PRY BAR TO ALIGN BOLT HOLES (PAN WAS BENT). AS THE PAN WAS L IFTED ON 8X8 CRIBBING BLOCK SLIPPED CAUSING THE CORNER OF THE PAN TO DROP APPROX. 8 INCHES. THE BAR WAS IN ONE OF THE BOLT HOLES AND WHEN THE PAN DROPPED DOWN, THE 3 FT BAR WAS DRIVEN INTO TH

EE WAS ASSISTING IN PUTTING SOCKETS ON A 2570 DRAGLINE FAIRLEAD CABLE IN THE SHOP. HE WAS HITTING THE BEND OF THE CABLE WITH A HAMMER TO POSITION IT IN THE SOCKET THE END FLEW OUT STRIKING EE ON THE FACE.

EMPL ASSISTING WITH THE INSTALLATION OF 5761 HOIST PEDESTAL WHEN A DRIFT PIN WAS DRIVEN THROUGH THE BASE STRIKING EMPL ON RIGHT BIG TOE.EMPL SUSTAINED HAIRLINE FRACTURE TO RIGHT BIG TOE AT THE BASE.

EE WAS HOLDING A B 0 HAMMER WHICH WAS THE STRUCK BY ANOTHER WORKER WHILE ATTEMPTI TO REMOVE DRAGDRUM BOLTS ON THE 2570 DRAGLINE A SMALL PIECE OF METAL FLEW OFF THE STRIKING FACE OF THE B0 STRI KING EE IN THE FOREHEAD INJURY REQUIRED TWO SUT URES TO CLOSE.

EMPLOYEE WAS CHANGING OIL FILTER ON D-11 CAT DOZER WHEN THE WRENCH SLIPPED OFF CAUSING INJURED TO STRIKE HIS LEFT WRIST ON A HOSE BRACKET.EMPLOYEE RECEIVED A PUNCTURE WOUND REQUIRING FIVE SUTU RES TO CLOSE THE INJURY.