Buscar en el registro

Employee was cuting rubber belting. The blade came out of the box cutter and cut employee's right thumb. It required 4 stitches.

Employee was beating ice off of conveyor with a hammer and this caused a cervical strain.

Employee was swinging a sledge hammer and strained his lower back. He went to his family Chiropractor and he is now fine and back to work full duty. No lost time, no restricted duty.

Employee was working on booster pump and was using a wrench. The wrench slipped and hit employees index finger on the left hand. He required stitches.

This accident just recently became reportable. EE was thought to have a bruised shoulder. Missed no time and was not under restrictions. However, EE is now going to therapy which makes it reportable. EE was using a pry bar and strained left shoulder.

Employee was cleaning sand screen with a brush. The brush got caught, and the employee jerked on the brush, it came back and hit him in the mouth. His front tooth was broken.

EMPLOYEE WAS MOVING IMPELLAR. COME-ALONG FAILED AND MASHED HIS RIGHT THUMB. NO BROKEN BONES.

EE WAS TIGHTENING A TAIL PULLEY, THE WRENCH SLIPPED AND HE HIT HIS RIGHT HAND, CONTUSION

WE WERE JUST NOTIFIED ABOUNT THIS ACCIDENT, EMPLOYEE DID NOT TURN IT IN WITHIN THE 10 DAYS. EMPLOYEE WAS PULLING ON A WRENCH WHEN THE WRENCH BROKE LOOSE & JERKED HIS ARM.

EE JERKED ON A WRENCH AND FELT A PULL IN HIS RIGHT SHOULDER, HOWEVER, HE THOUGHT IT WAS ONLY HIS RIGHT SHOULDER, HOWEVER HE THOUGHT IT WAS ONLY MINOR. IT IS STILL BOTHERING HIM SO HE REPORTED IT ON 5-23-02. HE MIGHT EVENTUALLY HAVE SURGERY.

EE WAS PULLING ON WRENCH. NOTICED STOMACH AREA HURTING. DR. SAID HE HAS AN UMBILICAL HERNIA.

EE WAS USING A PRYBAR. THE BAR SLIPPED & HIT EE IN THE RIGHT EYE.

EE WAS PULLING & PUSHING ON A WRENCH. HE STRAINED HIS LOWER BACK.

EE WAS BEATING SLAG OFF WITH A HAMMER. SLAG FLEW UP UNDER HIS SAFETY GLASS AND INTO HIS LEFT EYE.

EMPLOYEE WAS CUTTING CARDBOARD WITH A BOX KNIFE.HIS HAND SLIPPED AND HE CUT THE PALM OF HIS LEFTHAND.

EMPLOYEE WAS USING WRENCH TO TIGHTEN PACKING ON PUMP. HE PULLED UP AND STRAINED CAUSING LOWER BACK PAIN.

EMPLOYEE WAS PULLING ON A RATCHET. THE RATCHET SLIPPED AND HIT HIS THUMB ON THE RIGHT HAND. RESULT FRACTURED THUMB.

EE WAS CHIPPING FROZEN SAND OFF OF A CONVEYOR. SAND FLEW IN HIS EYE AND CAUSED AN ABRASION.

EE WAS LEANED OVER THE RAIL OF THE DREDGE PRYING ON A BAR. HE STRAINED HIS LOWER BACK. HE WAS ALSO PULLING CABLE.

EE WAS BYSTANDING WHILE COWORKER WAS WORKING WITH A SLEDGEHAMMER AND GOT TOO CLOSE, WAS HIT WITH HAMMER IN MID-SWING.

EMP WAS CUTTING A CABLE AND SPLINTER OF STEEL FLEW UP AND GOT IN HIS EYE.

EMPLOYEE WAS TRYING TO LOOSEN A BOLT. HIS HAND SLIPPED AND HIT THE CARRIAGE ON LATHE. TOP OF HAND WAS CUT AND REQUIRED 6 STITCHES.

TRIPPED AND FELL GETTING HIT IN MOUTH WITH PRY BAR HE WAS CARRYING.

STRAINED RT WRIST WHILE TIGHTENING BOLT.

EMPLOYEE WAS CLEANING UP A SMALL AMOUNT OF OIL FROM SHOP FLOOR. MIXING SOLVENT WITH OIL AND THEN COVERING AREA WITH OIL-DRI. WHILE USING BROOM IN CIRCULAR MOTION TO MIS COLVENT WITH OIL THE BACK OF HIS HAND RUBBED SHARP EDGE OF 9 GA FLATTENED EXPANDED METAL THAT WAS ON HORIZONTAL SHELF. CUT ON BACK OF HARD REQUIRED 4 STITCHES.

CUTTING OUT AN OULET ONT HE PANELING, KNIFE SLIPPED AND SLICED LEFT HAND (SIDE).

EMPL WAS PULLING ON WRENCH LOOSENING BASE BELTS ON PUMP.

PICKING UP SHOVEL AND GETTING ONTO BARGE, DROPPED SHOVEL AND PINNED FINGER BETWEEN SHOVEL AND HANDRAIL.

REPARING ENGINE & WAS TORQUING HEAD BOLTS WHEN WRENCH SLIPPED PINCHED HAND & CUAISNG CUT REQUIRING 3 STITCHES.

HE WAS HANGING UPSIDE DOWN THROUGH HOLE IN FLOOR OF LOADER CAB INSTALLING CAB MOUNTS ON FRONT-END LOADER DURING SCHELUED WINTER OVERHAUL AND TWISTED HIS BACK WHILE PULLING ON A WRENCH.

CHEATER PIPE SLIPPED ON RACHET PINCHING END OF RIGHT THUMB WITH LACERATION OF RIGHT THUMB.

YWEED CUTTING TOOL (CORN KNIFE) DEFLECTED OFF PLANT AND STRUCK RIGHT KNEE OF EMPLOYEE

EMPL TIGHTENING3LOCK NUT ON BEARING WHEN BAR HOLDING NUT SLIPPED CAUSING I.NAME TO LOSE BALANCE AND FALL FORWARD.

DRIVING OUT A W9DGE- SLIPPED AND HIT CORNER OF THE BUCKET.CHANGING A CABLE.AVULSION OF TIP OF LET RING FINGER 3/4" IN DIA. FLAP OF SKIN EXCISED AND REATTACHED.

PUTTING IN A PO3TOON A TAPER BAR SLIPPED OUT OF A FLANGE & STRUCK EMPLOYEE IN MOUTH SUPERINT ENDENT & EMPLOYEE DID NOT REALIZE ANY APPARANT INJURY EMPLOYEE STATED AT A MUCH LATER DATE THAT H IS TOOTH WAS CR5CKED REPORT MADE OUT AT THAT TIME

DREDGE OPERATOR3WAS DISMANTLING AN IMPELLER FROM ASHAFT WITH A SCREWDRIVER WHEN HE SLIPPED AND STRUCK SUPERINTENDENT'S FINGER AND LACERATED BETWEEN 1ST AND 2ND JOINT OF RIGHT HAND.

PRYING BELT UP 4HILE CHANGING ROLLERS