Buscar en el registro

EMPLOYEE WAS PRYING CHUNK FROM DRAG, WHEN IT FELL ON HIS HAND; STRAINED MIDDLE FINGER HAD SPLINT PUT ON IT.

SHOVEL HANDLE KNOCKED SAFETY GLASSES OFF AND HIT HIM IN THE RIGHT EYE - RECEIVED PRESCRIPTION DROPS.

CUTTING BOLTS THEN PULLED THE BOTTOM AND FELT SHARP PAIN TO THE MIDDLE OF BACK.

WHILE TRYING TO BREAK ICE OFF SLIDE ON F MACHINE STRAIN OCCURED TO THE MID SECTION OF HIS BACK.

EE TRYING TO DISLODGE PIECE OF SHALE IN HOPPER WITH CHAIN HOIST. CHAIN SLIPPED & MASHED FINGER AGINS I-BEAM. EE DID NOT TURN POWER OFF APRON FEEDER.

HITTING METAL WITH PIPE AND SMAHSED INDEX FINGE, LEFT HAND.

CLEANING THE CHUTE ABOVE #11 AND SMASHED THUMB IN BETWEEN THE CHUTE AND THE BAR. WAS HITTING THE CHUTE WITH THE BAR.

EMPLOYEE GREASING DRAG CHAIN BEARINGS WITH GREASE GUN. REMOVED PLUG FROM GREASE LINE AND HOT GREASE SPRAYED OUT.

EMPLOYEE WAS GUIDING A CONVEYOR SECTION. THE CHAINS ATTACHED TO THE CONVEYOR SECTION SLIPPED OFF A HOOK AND FELL ON HIS LEG CAUSING A CUT TO HIS LEG.

POKING SHALE OVER HEAD - INJURED BACK.

POKING CLINKERS. THE POLE KICKED BACK AND KNOCKED MY HAT OFF AND HIT ME IN THE HEAD.

TORQUING DOWN BOLTS ON ELJAY CRUSHER WITH TORQUE WRENCH. WRENCH TWISTED OFF AND BROKE AND HIT EE IN CHEST.

EMPLOYEE DIGGING WITH SHOVEL IN HARD GROUND JABBING GROUND NOTICED RIGHT SHOULDER HURTING

EE WAS ASSISTING A SECOND EE WHILE TAKING TWO PIPES APART. INJURED EE LET LOOSE OF HIS PIPE WRENCH AND LEANED FORWARD TO PICK UP SOMETHING, SECOND EE PULLED ON HIS WRENCH AND INJURED EE'S WREN CH SPUN WITH THE PIPE. THE HANDLE STRUCK INJUREDEE ON THE RT SIDE OF HIS HEAD BEHIND HIS RT EYE CAUSING CONTUSION AND LACERATION.

EMPLOYEE WAS USING A PIPE WRENCH ON A PIECE OF 2" PIPE TRYING TO REMOVE THE PIPE FROM THE NEXT COUPLING. THE PIPELINE WAS IN A TRENCH ABOUT 18" DEEP. THE PIPE WRENCH SLIPPED & RIGHT INDEX FING ER WAS PINCHED BETWEEN WRENCH HANDLE & GROUND. EMPLOYEE INCURRED A STRAIN OF RIGHT INDEX FINGER.

SHOVELING DRAG HIT WRIST ON METAL, WRIST STARTED TO SWELL.

I WAS STANDING ON LADDER PULLING OFF PIPE WRENCH WHEN WRENCH SLIPPED I FELL TO THE GROUND.

POKING ICE AND HIT BACK OF LEFT HAND ON A PIECE OF METAL.

WHILE MOVING LARGE PIECES OF STEEL WITH A CUMALONG, CUMALONG LET LOOSE FORCING ME TO FALL BACKWARDS. FELL FACE UP ON CONCRETE LANDING ON MY BACK. DIDN'T GO TO DOCTOR TILL 12/18/93. FIRST DAY O FF OF WORK WAS 12/22/93.

POUNDING IN ANGLE AND RUST GOT IN MY RIGHT EYE.

WAS TAKING CRUSHER APART., TAKING NUT OFF CRUSHER STEAM HITTING NUT WITH 16 POUND HAMMER STANDING ON PAY LOADER BUCKET SWUNG AND LOST BALANCE, FELL ABOUT 6 FEET TO THE GROUND.

I REPEATEDLY SLEDGE HAMMERED ON THE CRUSHER TRYING TO TAKE THE TOP OFF IT DID NOT MOVE HAND WAS SORE ALL WEEK AND DID NOT GET BETTER .

COME-ALONG SLIPPED OFF A CABLE AND EE FELL, DATE REPORTED INJURY WAS ON 9/13/93, VISITED DR. ON 9/25/93. VISITED DR AGAIN ON 10/15/93 AT WHICH TIME IT BECAME A MSHA REPORTABLE ACCIDENT.

TRYING TO REMOVE DRAG HA DA BAR TO PULL UP SO DRAG WOULD GO OVER THE MOTOR. BAR LET GO AND HIT LEFT WRIST.

WHILE ALIGNING LIFTERS IN THE KILN, ONE OF THE LIFTERS FELL ON MY ARM. ARM BEGAN SWELLING ALMOST IMMEDIATELY (RIGHT FOREARM)

HH SAID HE WAS TIGHTENING A TAIL PULLEY BEARING BOLT AND THE CRESENT WRENCH SLIPPED AND HIS LITTLE FINGER HIT THE GUARD. HE BROKE THE TIP OF HIS FINGER AND REQUIRED STITCHES.

USING SLEDGE HAMMER AND PICK TO REMOVE CARBON FROM INSIDE SCRUBBER. CHUNK CRACKED AND BROKE LOSE FALLING ON EMPLOYEE.

GREASING DOZER WITH GUN TRIED TO FORCE GREASE INTO GUN. GUN TRUNED CATCHING L. RING FINGER BETWEEN GUN AND DOZER . TOP OF FINGER CUT REQ STITCHES.

POUNDING METAL 4ITH HAMMER FOR PURPOSE OF BENDING CORNERS.HAMMER GLANCED OFF METAL STRIKING RIGHT KNEE.

I WAS PRYING A 6OLT AND IT BROKE AND MY RIGHT HAND HIT THE KILN BRICK

EMPL HSOVELING 8HALE AND DIRT HIT SOFT SPOT IN GROUND.SHOVEL SANK COMPLETELY AND RIGHT FOOT SLIPPED OFF SHOVEL AND TWISTED.

WORKING ON SYMO3'S CRUSHER REPLACING SAUCER BRASS. BRASS WAS TIGHT. OTHER EMPLOYEE AND I,NAME WERE TRYING TO PUT BRASS IN WITH A 4X4. HE WAS HOLDING BRASS AND OTHER EMPLOYEE WAS HAMMERING WITH 4X4. HE MISSED3AND HIT HIS FINGER INSTEAD.

EMPLOYEE WAS REPAIRING DOZER HE PICKED UP A PRY BAR AND PLACED IT INTO DOZER TRACK EMPLOYEE STEPPED BACKWARD AND HURT HIS BACK