Buscar en el registro

IW was using hammer to loosen wedge blocks. A shard of metal came loose and stuck in their arm, causing a laceration.

IW struck left little finger with hammer.

Using hand wrench to loosen a nut. Wrench slipped off and elbow hit pipe below.

Digging out chute. Employee has been working regular job since June, was treating with therapy. Employee has not improved and is going for surgery Fri. 9-15-17. Employee will be off work following surgery.

EE was using a ratchet and it slipped off the bolt and struck EE above the right eye.

Lifting motor with chain hoist. The chain became disconnected and pinched left index finger causing laceration and fractures.

Employee was using a wrench to install a roller on a crushing plant. When he pulled on the wrench he had a pain in his chest. He then was short of breath. The evening of 4/16/13 he was admitted to the hospital with a collapsed lung.

Employee was cutting a rubber hose with a utility knife and the knife slipped and cut his left palm.

Employee was hitting a scraper blade and rust flew into his right eye.

Employee was cutting a piece of conveyor belt with a utility knife and cut his left thumb, requiring stitches.

Employee was hammering a bucket tooth and a piece of metal broke from the tooth and lodged in the surface of his abdomen.

Employee was striking a chisel with a hammer and a small piece of metal broke off and lodged in his left hand.

EE was working on a scalper deck of a crushing plant. He got his finger between a bar and hammer and lacerated his right middle finger. EE did not report this injury until 10/13/09 when it became infected.

Employee twisted his right knee while scraping a belt.

Employee was removing a tooth from a loader bucket with a hammer. A piece of metal broke off and hit him in the face.

CRUSHER WELDER HIT EMPLOYEE'S RIGHT HAND WITH A SLEDGE HAMMER WHEN THEY WERE HITTING I BEAM TRYING TO FREE IT.

WHILE USING A PRYBAR TO PRY ROTOR ON A CRUSHER, )PRIMARY CRUSHER), EMPLOYEE INJURED HIS BACK.

EE WAS SWINGING A SLEDGE HAMMER TO CLEAR WET MATERIAL FROM BIN. AS HE SWUNG HAMMER HIS RIGHT THIRD FINGER STRUCK AN ANGLE SUPPORT, CUTTING IT. EE TAKEN TO HOSPITAL & FINGER WAS SUTURED, EE MIS SED 2 DAYS FROM WORK & IS NOW BACK TO WORK.

EMPLOYEE WAS TIGHTENING BOLTS ON A CRUSHER WHEN THE WRENCH SLIPPED AND HE LOST HIS BALANCE CAUSING HIM TO FALL.

EMPLOYEE WAS LOOSENING A BOLT ON A CRUSHER MTOOR. HE PUSHED ON THE WRENCH WITH HIS LEG AND HTE NEXT DAY HIS LEFT TESTICLE BECAME SWOLLEN. EMPLOYEE HAD NOT GONE FOR MEDICAL TREATMENT UNTIL 7- 8-96. NO TIME WAS LAST UNTIL 7-9-96.

EE WAS SHOVELING UNDER A CONVEYOR WHEN HE HIT HIS HAND ON A SHARP OBJECT.

WHILE TIGHTENING BOLTS ON CRUSHER MOTOR BENT OVER & KNEE POPPED

68935 INSTALLING A PIN IN THE STABLIZER BAR OF A DOZER THE BAR SLIPPED AND HE CAUGHT HIS FINGER BETWEEN THE PIN AND THE BAR.

EMPLOYEE WAS ASSISTING IN DISLODGING A LARGE STONE THAT HAD JAMMED IN THE CRUSHING UNIT WHEN HE INJURED HIS LEFT MIDDLE FINGER

EMPLOYEE WAS USING A SLEDGE HAMMER TO BREAK A LARGE ROCK THAT WAS STUCK IN THE PRIMARY CRUSHER. AS HE SWUNG THE HAMMER AND IT HIT THE ROCK, THE HANDLE BROKE RESULTING IN INJURY TO HIS RIGHT RI NG FINGER.

WHILE WORKING ON A PIECE OF EQUIPMENT EE WAS USING A HAMMER. WHILE HAMMERING HE FELT PAIN IN HIS RIGHT ELBOW AND FOREARM.

EE WAS USING A 5 INCH PRYBAR TO TURN THE ROTORS IN THE CRUSHER WHEN THE BAR SLIPPED CAUSING EE TO FALL BACK STRIKING HIS BACK ON THE SLEEVE ASSEBLY.

EMPLOYEE WAS REPARING A TRUCK AND WAS LOOSENING BOLTS WHEN HIS HAND SLIPPED OFF OF A WRENCH CAUSING HIM TO STRIKE HAND RESULTING IN LACERATION TO LEFT INDEX FINGER.

WHILE SHOVELING DIRT FROM UNDER STORAGE BINNS HIS R STRUCK A METAL RAIL RESULTING IN A LACERATION OF THE R INDEX FINGER

EMPLOYEE WAS TIGHTENING BOLTS ON A CABLE CLAMP WHEN THE THREADS STRIPPED AND A PIECE OF METAL LODGED IN HIS LEFT EYE.

EMPLOYEE WAS UNDER A DRILLING RIG LOOSENING BOLTS WHEN ANOTHER EMPLOYEE WAS WORKING ABOVE USING A PRY BAR. THE PRY BAR SLIPPED AND STRUCK THE INJURED EMPLOYEE ON THE FOREHEAD ABOVE THE LEFT EY E.

EMPLOYEE WAS SHOVELING DIRT FROM AROUND PRIMARY CRUSHER WHEN DUST BLEW INTO HIS EYES.

EMPLOYEE WAS LOOSENING BOLTS AT PRIMARY CRUSHER WHEN WRENCH SLIPPED RESULTING IN A LACERATION OF THE LEFT FIRST FINGER

WHILE EMPLOYEE WAS WORKING TO FREE A LARGE ROCK THAT WAS JAMMED IN THE CRUSHER HE WAS STRUCK ACROSS THE RIGHT EYE WITH A SWINGING CHAIN, LACERATING HIS RIGHT EYE LID.

EMPLOYEE WAS USING A PIPEWRENCH TO LOOSEN A FITTING WHEN THE WRENCH SLIPPED CAUSING EMPLOYEE TO INJURE HIS BACK.

EMPLOYEE WAS TIGHTENING A BOLT WITH A WRENCH WHEN HIS HAND SLIPPED OFF THE WRENCH HE CAUGHT HIS HAND ON SOME TIN WORK LACERATING HIS LEFT HAND.

EMPLOYEE WAS STANDING WHILE HOSING DOWN A FEED BELT AND IN TURNING AROUND FELT A PAIN IN THE BACK

EMPLOYEE WAS SCRAPING MATERIAL FROM CHUTES WITH A LONG HANDLED SCRAPER.

EMPLOYEE WAS TIGHTENING BOLTS THAT HOLD JAW DIE IN PLACE WHILE HE WAS HITTING WRENCH WITH HAMMER HE MISSED THE WRENCH HITTING HIS LEFT RING FINGER WHICH WAS SMASHED AND BROKEN UNDER NAIL

MECHANIC MOVING RADIATOR TO POSITION BOLT HOLES USING BAR TO MOVE RADIATOR. MOVED RADIATOR TOO FAR, DROPPING IT ON THUMB.