Cada lesión y muerte que la MSHA tiene registrada. Filtra por estado, año, sector, clasificación, experiencia o cualquier palabra clave de la narrativa del investigador.
Envíame un correo cuando un nuevo incidente coincida con estos filtros. Un correo de confirmación; cancela la suscripción cuando quieras.
WORKING ON SURFACE CORE DRILL RIG, USING A PRYBAR WHICH RECOILED AND TWISTED HIS RIGHT HAND.
EMPLOYEE SLIPPED ON A ROCK AND TWISTED HIS LEFT ANKLE.
WHILE WORKING UNDERGROND AND HAMEMRING A CORE BARREL, HE STRUCK HIS LEFT HAND.
EMP WAS ATTEMPTING TO REMOVE A HUNG STEEL IN FACE WITH BODILY FORCE. HE SUBSEQUENTLY TWISTED WRONG AND STRAINED HIS LOWER BACK.
EMPLOYEE WAS MOVING A 6" PIPE WITH A COME-ALONG WHILE HANGING ON TO WIRE TO SUPPORT PIPE HE BECAME OFF-BALANCE. PIPE FLIPPED UP CATCHING LEFT SMALL FINGER IN A PINCH POINT.
EMPLOYEE WAS USING BOLT CUTTERS TO CUT CHAIN. HE PLACED HANDLE AGAINST CHEST AND INJURED HIS RIBS. MSHA: WORKED - 3/13/96, SCHEDULED OFF - 3/14/96, 3/15/96, 3/16/96 AND 3/17/96. FULL DUTY 3/18 /96 (SEEN DR.). LIGHT DUTY 3-19-96 TO ???...
WHEN PUTTING LEG ON HAMMER EMPLOYEE LAID DOWN AND CAUGHT (R) INDEX FINGER BETWEEN HAMMER AND ROCK. MSHA: LIGHT DUTY (3 DAYS)
WHILE KNOCKING BITS FROM DRILL STEEL, A SMALL PIECE OF METAL BROKE OFF LODGING IN THE R KNEE.
WHILE CUTTING WIRE MESH OUT OF BACK TO RELIEVE BASKETS A ROCK FELL OUT STRIKING EE ON THE LEG KNEE.
FABRICATING SLIDE ON FLEAT VALVE USING HOOK KNIFE BLADE W/2" POLY PIPE. WAS CUTTING AWAY FROM SELF, BUT HAND WAS IN THE WAY. CUT THROUGH POLY PIPE & INTO HAND. LACERATION TO LEFT HAND.
WHILE SWINGING A SLEDGE HAMMER DURING THE REMOVAL OF BOLTS FROM THE SAG MILL TWISTED R KNEE.
WHILE UNPLUGGING THE ZINC CONE WITH A BAR, THE BAR HIT THE EMPLOYEE IN THE MOUTH, CRACKING THE (1) FRONT TOOTH.
WHILE DISLODGING BOULDERS IN NECK OF CHUTE ABOVE VIBRATORY SHAKER-THE BOULDER CAME DOWN STRIKING THE SCALING BAR CAUSING THE BAR TO PIVOT STRIKING THE EMPLOYEE IN THE HEAD;RIGHT CHEEK-JUST UND ER THE EYE.06-26-27-28 REGULAR DAYS OFF 07-02-03-04-05 REGULAR DAYS OFF.
CHANGING A BOLT ON SAG MILL,BOLT WAS PUSHED THROUGH HOLE STRIKING EMPL ON RIGHT FRONT TOOTH.CAP TO BE PLACED ON TOOTH,FUTURE APPOINTMENT.
WHILE WORKING ON NEW LINE TO CLARIFIER A WRENCH SLIPPED OFF A NUT ON A VIC COUPLING AND HIT EMPLOYEE OVER THE LEFT EYE.
BREAKING DRILL RODS WITH 36" PIPE WRENCH, WHEN FORCED DOWN ON THE WRENCH SHOULDER GAVE OUT. ROD WOULD NOT GIVE.
WHILE PRYING ON SAG MILL LINER,LINER FELL HITTINTHE SIDE OF THE MILL AND ROLLED OVER ON TOP OF THE RIGHT FOOT.INJURED IS ON LIGHT DUTY AT THE PRESENT.
WHILE MAKING UP DISC FILTER BAGS A UTILITY KNIFE SLIPPED AND CUT THE LEFT PALM. THIS CUT REQUIRED FOUR STITCHES.
WHILE BARRING DOWN A ROCK KNOCKED THE BAR OUT OF HIS HAND, AT WHICH POINT THE BAR RICOCHETED OFF THE GROUND AND STRUCK HIS FACE ON THE RIGHT SIDE.
WRENCH SLIPPED AND EMPL HIT RIGHT ELBOW ON EDGE OF ELECTRICAL ENCLOSURE.
CUT TO LEFT HAND PALM,CHANGING BLADES IN UTILITY KNIFE,KNIFE FELL APART HE GRABBED TO CATCH IT AND SPARE BLADE CUT INTO PALM OF HAND.
EMPLOYER AND EMPLOYEE WERE BOTH WORKING ON REPAIRING A DRUM TRUCK.THEY WERE USING HAND TOOLS AND WERE PUSHING AND PULLING.EMPLOYEE WAS NOT AWARE THAT THE EMPLOYEE HAD INJURED HIS BACK UNTIL 06 -25-89 WHEN EMPLOYEE CALLED TO SAY THAT HE COULDNPT COME ABCK TO WORK 0N 06-26.IT WAS NOT UNTIL 07-01 THAT EMPLOYEE DECIDED HE HAD AN INURY TO REPORT.EMPLOYEE THEN STATED EMPLOYER SHOULD FIND
WHILE ADJUSTING A BOLT ON A CONVEYOR THE WRENCH SLIPPED AT WHICH TIME RIGHT INDEX FINGER WAS SMASED INTO A CONVEYOR SUPPORT.
EMPLOYEE WAS USING PIPE WRENCH TRYING TO TURN STUCK DRILL RODS. DRILLER TRIED TO BREAK RODS USING HYDRALIC CHUCK. HELPER STILL MAINTAINED GRIP ON WRENCH AND SUFFERED PULLED MUSCLES IN SHOULDE AS A RESULT OF MAINTAINING GRIP ON WRENCH AS DRILL ROD WAS ROTATED.