Buscar en el registro

EE WAS TRYING TO ADJUST HANGER BAR ON STRONGBACK THAT HAD BEEN LOCKED. AS HE ADJUSTED ONE SIDE, THE OPPOSITE SIDE CAME OFF CAUSING THE BAR TO GO UPWARDS, SMASHING HIS FINGER BETWEEN THE BAR & STRONGBACK. THE LACERATION REQUIRED EIGHT SUTURES & A SPLINT. HE WAS RELEASED TO RETURN TO WORK WITHOUT RESTRICTIONS FOR HIS NEXT WORK SCHEDULE.

EE HIT GATE RETAINER WITH A HAMMER TO BREAK THE RETAINER. WHEN IT BROKE, THE GATE FELL HITTING THE BACK OF HIS HAND.

EMPLOYEE DROPPED TRICON ON HIS LEFT FOOT, WHEN IT SLIPPED OUT OF HIS HANDS.

EMPLOYEE STATES HE PINCHED HIS FINGER BETWEEN A ONE AND 7/8 INCH SOCKET AND THE NUT HE WAS REMOVING FROM A LIP SAVER.

WHILE REPLACING A LINER,USING A DOUBLEJACK HAMMER THE EE STRUCK THE LINER & A SLIVER OF METAL STRUCK HIS KNEE

EE STATES HE WAS TIGHTENING BOLTS ON CRANE POD AND FELT PAIN IN THE RIGHT WRIST; ON 7/17/99 EE REPORTED CON'T DISCOMFORT IN RIGHT WRIST

EE WAS TAKING A HYDRUALIC HOSE OFF (CYLINDER) ON THE #4 BALL MILL, LIGHTLY TAPPING WITH A HAMMER. WHEN IT RELEASE, IT HIT HER ON THE LOWER LEFT JAW.

EE WAS SWEEPING THE FLOOR IN THE MACHINE SHOP AND FELT SOMETHING ENTER HIS LEFT EYE.

TWO EMPLOYEES WERE ATTEMPTING TO INSTALL A ROCK KNOCKER (APPROX. 200 LBS) TO THE UNDERSIDE OF A 980 HAULTRUCK BED. THE KNOCKER WAS BEING RAISED BY A FLOOR JACK. THE JACK ROLLED. THE KNOCKER SL IPPED STRIKING HIM AND COWORKER.

THE EMPLOYEE WAS ATTEMPTING TO PRY OPEN AN AIR VALVE. THE PRY BAR SLIPPED AND LACERATED THE RIGHT RING FINGERTIP WHICH REQUIRED THREE SUTURES.

WHILE INSTALLING TRACK PAD A COME A LONG FAILED AND TRACK PAD STRUCK EMPLOYEES RIGHT FOOT.

AT APPROX 10:00 AM ON WED., 1/29/97, A LINEMAN ACCIDENTLY DROPPED A SHERMAN RIELLY X-100 BLOCK FROM THE TOP OF POLE #60, STRIKING INJURED ON THE BACK OF HIS RIGHT HAND, CAUSING A HAIRLINE FRAC TURE. THE LINEMAN SHOUTED "HEADACHE" AS HE LOST HIS GRIP ON THE DOLLY & WE RAN FROM THE BUTT OF THE POLE AS IS NORMALLY DONE IN SUCH INSTANCE. EE WAS TRANSPORTED TO MEDICAL AID.

ASSISTING ANOTHER EE REMOVE A DIPPER TOOTH BY HOLDING A METAL PUNCH.

EE WAS USING A PRYBAR TO OPEN A VALVE AND PINCHED LITTLE FINGER CAUSING A SMALL EVULSION.

A SINGLE PIECE OF REFRACTORY APPROX. 8" SQ. FELL 3 TO 4 FEET STRIKING EMPLOYEE'S RIGHT FOOT APPROX. 1/2 INCH BEHIND STEEL TOE OF BOOT.

INJURED WAS KNOCKING OUT A PIN WITH A SLEDGE HAMMER WHEN HE FELT A METAL CHIP HIT HIS LEFT LEG BY THE KNEE.

WAS CUTTING PLASTIC BAND ON 2 INCH PIPE WITH KNIFE WHEN THE KNIFE SLIPPED, PUNCTURING LEFT HAND ABOVE THUMB.

WHEN CUTTING TAPE OFF WELDING LEAD, KNIFE SLIPPED & CUT HAND; REQUIRED SIX [6] STITCHES; WENT BACK ATO WORK AT 10:30 AM; NO LOST TIME. [NOTE] THIS WAS AT THE SMELTER PER CALL TO MR. REED

EE WAS HOLDING THE HEAD OF A BOLT WITH A WRENCH WHEN THE WRENCH SLIPPED CAUSING A SHACKLE TO SPIN AND PINCH HIS LEFT INDEX FINGER BETWEEN THE SHACKLE AND STEEL.

EE WAS HELPING TO GUIDE POLES DURING A POLE CULLING OPERATION WHEN THE TONGS USED TO LIFT THE POLES BROKE CAUSING A POLE TO DROP & BOUNCE UP EE ATTEMPTED TO HOLD THE POLE DOWN BUT IT HIT HIM O N THE MOUTH

EE WAS PULLING ON A LIFT JACK AND WHILE HE WAS PULLING THE JACK FELL TOWARD HIM AND HIT HIM ON THE LOWER LIP.

I.NAME CAUGHT LEFT RING FINGER BETWEEN 4" OPENING AND A SLEDGE HAMMER HANDLE WHILE HAMMER WAS BEING USED IN A FLOAT CELL.

HE AND ANOTHER EMPLOYEE WERE REMOVING A SHOVEL ADAPTER WITH A SLEDGE HAMMER WHEN A PIECE OF STEEL BROKE OFF THE ADAPTOR AND HIT HIM ON HIS RIGHT EAR.

EE WAS PRYING UP A 1" X 9 1/2" X 78" PLATE THAT WAS LAYING ON THE FLOOR WITH A PRY BAR TO BLOCK IT. THE PRY BAR SLIPPED AND CAUGHT HIS LEFT MIDDLE FINGER UNDER IT.

HOLDING ON TO WRENCH- WRENCH SLIPPED AND KICKED BACK- BROKE LEFT INDEX FINGER.

INJURED WAS REMOVING A BOLT FROM A PIPE ATTACHED TO A PUMP.HE WAS USING A BOX END WRENCH WHEN THE BOLT LOOSENED.THE RWENCH CAME OFF THE BOLT AND HIT INJURED ON THE NOSE.

INJURED WAS HITTING METAL WEDGES WITH A DOUBLE JACKHAMMER WHEN A PIECE OF METAL BROKE OFF THE WEDGES AND HIT INJURED ON THE RIGHT FOREHEAD.

I NAME WAS REMOVING A CLEVIS BOLT OFF A VALVE USING A BALL PIN HAMMER WHEN HE STRUCK HIS LEFT THUMB

EE WAS REMOVING ICE MUD FROM A LADDER ON A HAULAGE TRUCK BEFORE HE CLIMBED THE LADDER. HE WAS USING A HAMMER TO BREAK OFF THE ICE MUD AND A FOREIGN OBJECT IMBEDDED IN HIS LEFT EYE.

ALIGNING PIN HOLES ON JIB OF CRANE PINS SLIPPED JIB FELL ON EMP STRUCK HIM ON R SHOULDER FOREHEAD ABOVE R EYE

EE WAS STRUCK ON HIS RIGHT MIDDLE FINGER WITH A HAMMER BY ANOTHER EE WHILE HE WAS HOLDING A PUNCH TO KNOCK OUT SHOVEL DIPPER TOOTH.

I.NAME USING POCKET KNIFE TO CUT PIECE OF RUBBER LINING,CUT LEFT INDEX FINGER REQ 4 SUTURES.

HE WAS HIT ON THE UPPER RIGHT LIP BY A PIECE OF METAL WHICH CAME OFF A PRIMARY CRUSHER LINER THAT WAS BEING WEDGED OUT BY A ROCK BREAKER.

I.NAME STRIKING A BEARING WITH HAMMER TO REMOVE IT OFF SHAFT WHEN PIECE OF BEARING BROKE OFF AND STRUCK I.NAME ON RIGHT KNEE.

EE WAS IN THE PROCESS OF PUSHING A CRAWLER IN PLACE UNDER A SHVEL WITH A BAR. THE BAR SLIPPED ANHE EIGHTER HIT THE BAR OR CRANE BLOCK AGAINST HIS LEFT INDEX FINGER CAUSING A CUT.

HE WAS INSTALLING A ROTARY MOTOR ON A DRILL AND WORKING OFF A LADDER WHEN HIS TOOL SLIPPED. IT CAUSED HIM TO LOSE HIS BALNCE AND JUMP OFF THE LADDER, HITTING RIGHT CALF ON HIS TOOL BOX.

TRYING TO GET TAILGATE TO CLOSE WITH CHEAT PIPE ON TAILGATE LEVER. WRENCHED SHOULDER.

WAS PRYING WITH SMALL BAR TO WORK ONE PIPE END UNDER 8" LINE WHEN PIPE MOVED CAUSING BAR TO HIT LEG CUTTING THROUGH SKIN.

I NAME WAS SUING A COME-A-ALONG TO RAISE A PUMP AS THE TENSION INCREASE IT CAUSED I NAME TO USE BOTH HANDS TO PULL ON THE HANDLE AND CAUSED HIS R SHOULDER TO HURT I NAME HAS HAD PREVIOUS PROBL EMS WITH HIS R SHOULDER

EMPLOYEE WAS REMOVING THE RETAINING CLIPS ON SOME FLOOR GRATING AT THE COPPER MOLY THICKNER. EMPLOYEE WAS USING A PRY BAR TO BREAK THE TACKS ON THEM. THE FIRST TEN CAME OFF ALL RIGHT, BU THE LAST ONE POPPED OFF AT A HIGH SPEED, CLIPPING EMPLOYEES RIGHT EAR.

WHILE STRIPPING A CONVEYOR EMPL WAS PULLING HOOK KNIFE ALONG CABLE WHEN BLADE BROKE CAUSING KNIFE TO SLIP AND CUT LOWER R THIGH THIS INCIDENT IS AN OVERSIGHT FOUND DURING AN INTERNAL AUDIT CHE CK OF RECORDS

CUT TIP OF MIDDLE FINGER RIGHT HAND,WHILE TIGHTENING A BOLT ON THE LEFT PARKING BRAKE BRACKET ON A EUCLID HAULAGE TRUCK.

WORKING ON EUCLID PRODUCTION TRUCK IINSTALLING PIN ON RIGHT TIEROD END BOSS. WAS HITTING PIN INTO PLACE WITH 10# HAMMER & CAUGHT RIGHT INDEX FINGER BETWEEN HAMMER HANDLE & PIN EDGE CUTTING FI NGER TIP.

WAS CLOSING LEAKING VALVE USING CHEATER PIPE & VALVE STEM BROKE OFF CAUSING HIM TO STRAIN BACK.

EMPL WERE INSTALLING APUMP AT PRECIPITATION PLANT I NAME WAS HOLDING SOCKET WRENCH ON LOWER FLANGE BOLT WHILE OTHER EMPL TIGHTENED IT THE WRENCH SLIPPED AND CUT I NAME FIRST JOINT OF R LITTLE FINGER

EMP WA S EMPTYING REGRIND BUCKET HOLDING BUCKET HANDLE WITH LEFT HAND WHILE HITTING HANDLE WITH SLEDGEHAMMER USING RIGHT HAND. MISSED HANDLE AND STRUCK LEFT HAND WITH SLEDGEHAMMER

EMPLOYEE WAS USING A HAMMER TO PLACE A BEARING IN ITS PLACE AND A PIECE OF STEEL BROKE OFF OF THE BEARING AND FLEW INTO HIS STOMACH

THE INJURED WAS WORKING INSIDE #4 BALL MILL AS PART OF A 6-MEN CREW.THEY WERE USING A 1 1/2 TON PULL A FEED END LINER FROM THE CENTER OF THE MILL TO THE OUTER FEED END LINER AREA.THE LINER WAS DRAGGING OVER THE BALL LOAD,IT SUDDENLY MOVED FAST AND CAUSED THE PULL LIFT TO TURN.THE HANDLE OF THE PULL LIFT PINCHED HIS AHND BETWEEN THE HANDLE AND THE MILL SHELL.

CHANGING OUT A ROLLER ON ROTARY DRILL CRAWLER.EMPLOYEE CUT THE KEEPER TO REMOVE PIN FROM ROLLER.ANOTHER EMPLOYEE HIT THE PIN WITH AHMMER TO SEE IF IT WOUILD COME OUT,AND WHEN IT DIDN'T HE PUT HIS HAND UNDER THE ROLLER ATTEMPTING TO STRAIGHTEN IT OUR AND THE ROLLER FELL DOWN,MASHING HIS FINGERS ON THE RIGHT HAND.

EMPLOYEE WAS STRAIGHTENING OUT A HANDRAIL ON NO.3 BALL MILL CHUTE WITH 24" CRESCENT WRENCH.HE WAS PUSHING AWAY FROM HIMSELF WHEN HE FELT A PAIN IN HIS ABCK.