Buscar en el registro

3 EMPLOYEES WERE PULLNG FM#3 FK PUMP SCREW. ONE EE WAS USING A 5' PRY BAR TO MOVE THE SCREW FORWARD AND INJURED EE WAS HOLDING THE LOCKING COLLAR. THE LOCKING COLLAR BIT FAST TO THE PUMP SCREW SHAFT AND MOVED WITH THE SCREW PINCHING FINGER BETWEEN THE LOCKING COLLAR ADN SCRWE BEARING HOUSING.

WORKING ON FINISH MILL #1 ELEVATOR TO ELEVATOR AIRSLIDE TO RECANVAS THE AIRSLIDE. CUTTING THE CANVAS TYPE FABRIC WITH A UTILITY KNIFE, THE KNIFE WENT THRU THE MATERIAL & SLICED HIM IN THE THIG H AREA OF RIGHT LEG. SUTURE REMOVAL TO FOLLOW WITH DOC APPT.

TRYING TO FREE A STUCK IDLER BY HITTING ON IT WITH HIS ADJUSTABLE WRENCH, HE MISSED AND HIS ARM WENT BETWEEN THE BELT AND THE IDLER AND GOT CAUGTH IN BETWEEN.

LIFTING A 300 LB. OF MATERIAL IN BUCKET W/CHAIN YALE HOIST. CHAIN BECAME HUNG UP ON PULLEY HOOK. HE NOTICED SLACK SIDE OF CHAIN IN BUCKET & WENT TO PULL CHAIN UP OUT OF BUCKET. HAND WAS ON SLA CK CHAIN, CHAIN RAN THROUGH PULLEY, BLANACING LOAD & SLAPPING SLACK CHAIN TIGHT AGAINST LOAD BEARING SIDE OF CHAIN AND STRUCK HAND.

EMPLOYEE WAS HOLDING DRIVE PIN WITH HANDLE WHILE ANOTHER EMPLOYEE WAS HITTING PIN. SLEDGE MISSED PIN AND HIT EE ON LEFT HAND ON THUMB CAUSING SWELLING AND BRUISING.

CLEANING BLOWER MOTOR ON G10A AT CLINKER SILO. CHISELING HARD BUILDUP FROM BETWEEN MOTOR AND FAN HOUSING. CHISEL SUDDENLY CHANGED POSITION PINCHING OR JAMMING THUMB OF LEFT HAND AGAINST A FAN HOUSING BRACE.

REMOVING NOSE COATING AT CLINKER KILN #2 HOOD/NOSE RING WITH THE HELP OF ANOTHER EE. COATING FELL AND AFTER DUST CLEARED SAW EE ON PLATFORM. CALLED AMBULANCE.

SETTING PINION IN PLACE AT FINISH MILL #3 MILL SPEED REDUCER. LEANING OVER TOP OF THE SPEED REDUCER WORKING A COME-A-ALONGWHEN COME-A-ALONG SLIPPED AND EE FELL DOWN STRIKING HIS LOWER LEFT RIB S. WENT TO DR ON 11-12-96.

EE WAS STANDING ON A LADDER AT GATE OF SILO #3 USING A SLEDGE HAMMER TO CLOSE GATE. STRIKING ARM ON GATE WHEN SLEDGE CAUGHT ARM ON GATE AT THE SIDE & SLID OFF STRIKING FINGER ON END OF ARM ON THE GATE.

REPLACING HOLD DOWN BARS ON VENT COLLECTOR 1 LIDS ANOTHER EE PUSHED THE BAR THRU ONE RETAINING HOLE AND WHEN IT WAS ABOUT TO COME THRU THE SECOND HOLE IT PINCHED FINGER.

TRYING TO KNOCK BOLTS OFF DUST COLLECTOR #7 MOTOR, FINGER STRUCK HAMMER HANDLE.

ATTEMPTING TO POKE LARGE LUMP IN DISTRIBUTION BOX 1 WITH T HANDLE POKE BAR. WHEN LUMP BROKE THE BAR HANDLE CAME DOWN ON DISTRIBUTION BOX EDGE PINCHING FINGER BETWEEN BAR AND EDGE OF DISTRIBUTI ON BOX.

CLEANING OUT HOLDING BLOCKS ON #2 KILN COOLER PRIOR TO INSTALLING SHAFT. A VERY DIFFICULT AREA TO WORK, HE WAS USING A SHIN TO CHIP OUT DIRT. MISSED THE SHIM & HIT HIS THUMB WITH A HAMMER.

CLEANING UNDER LIMESTONE BELT TAIL PULLEY WITH AHOE. BENDING OVER IN AN AWKWARD POSITION TO HOE OUT THE MATERIAL, FELT A TWINGE IN HIS BACK.

CLEARING LUMPS IN CLINKER SILO #8 HIT BIN WITH SLEDGE HAMMER & MATERIAL ON LEDGES FELL INTO EYES

INSTALLING BELT ON STOCK FEEDER TIGHTENING NUT WITH WRENCH FELT DISCOMFORT BUT NOT BAD AT THE MOMENT LATER AT HOME MUSCLE GOT TIGHT SHOOTING SHARP PAIN IN RT GROIN

PRESETTING LINE 3 TO SILO 4 THE BREAKS AT CEMENT SILO 2 WHICH ARE 10FT ABOVE THE SILO ROOF IN ORDER TO REACH THE BREAKS HE USED A LADDER & STOOD ON TOP OF #1 FINISH MILL FK LINE WHICH IS 6FT A BOVE THE SILO ROOF SOME OF THE STUD BOLTS WERE TIGHT HE DOUBLE WRENCHED THEM & WRENCH SLIPPED OFF HE FELL BACKWAREDS AGAINST BRANCH OF LINE

DRIVING PINS OUT OF COOLER DRAG LINKS WITH B&O & MALL HAMMER PIECE OF METAL BROKE OFF PIN & WENT INTO LEFT ARM

WHILE SLUGGING ON SLUG WRENCH, PINCHED FINGER BETWEEN WRENCH & MILL SIDELINE WITH OUT HIM REALIZING IT TILL WRENCH WAS HIT.

WHILE HAMMERING ON KILN#2 CHIP FROM HAMMER HEAD CAME OFF AND HIT RIGHT THUMB.

EMPLOYEE WAS OPENING A BOX WITH A LAB SPATULA WHEN SPATULA BROKE THROUGH THE BOX AND CUT HIS LEFT THUMB.

EMPLOYEE WAS TIGHTENING A LINER IN THE LIMESTONE CRUSHER.HE SLIPPED OFF THE BOLT AND HIT RIGHT FINGER AGAINST A PIECE OF ANGLE IRON.

EMPLOYEE WAS POUNDING ON BOTTOM TRACTION BEARING AND PIECE OF STEEL FLEW OFF INTO LEFT FOREARM.METAL WAS LODGED IN LEFT FOREARM.

EMPLOYEE WAS CLEANING OUT CHUTE WITH A BAR.HE WAS POKINF HARD BUILD WITH THE BAR WHEN HANDS SLIPPED OFF AND SMASHED AGAINST SIDE OF CHUTE.

HAMMERING SHIM-EMPLOYEE WAS HOLDING SHIM WITH LEFT HAND AND HAMMERING WITH RIGHT HAND,MISSED SHIM AND HIT FINGER.

EMPLOYEE WAS CUTTING ROPE,KNIFE SLIPPED OFF..CUTTING RING FINGER ON LEFT HAND.

WHILE USING A PRY BAR TO DISLODGE A ROCK STUK IN THE FEEDER XX THE BAR SLIPPED AND SMASHED HIS FINGER BETWEEN THE BAR AND THE EDGE OF THE FEEDER.

EMPLOYEE WAS FREEING ALUMP OUT OF CLINKER DUST COLLECTOR #3 DISCHARGE CHUTE ONTO BELT #6, THE LUMP GAVE WAY AND EMPLOYEE CAUGHT HIMSELF WITH LEFT HAND UNDER CHUTE. PINCHED FINGERS BETWEEN BEL T AND SAFETY GUARD.

MAN WAS SLEDGING BOLTS HAMMER SLIPPED & CAUGHT RIGHT INDEX FINGER.

EMPLOYEE CUTTING THE TOP OF A BOX, KNIFE SLIPPED AND CUT LEFT THUMB.

MAN WAS POKING AT A LUMP IN SILO 8 TO FEEDER 8 AND JAMMED HIS LITTLE FINGER RIGHT HAND ON DROP LEG TO FEEDER 8. BRUISED FINGER AND PAIN UP HIS ARM.

POKING AT LUMP IN SILO 8 TO FEEDER 8 AND JAMMED LITTLE FINGER RIGHT HAND ON DROPLEG TO FEEDER.BRUISED FINGER AND PAIN UP HIS ARM.