Buscar en el registro

While working in the shop, EE dropped a wrench on left hand causing a closed non-displaced finger fracture. The adjustable wrench landed on EE's hand which was caught between the wrench and metal container.

The miner was feeding a new belt onto a belt conveyor when the spreader board on a chain hoist skipped free. The board flew out and struck the miner in the chest.

When swinging a sledgehammer at a rock, missed the rock causing hand to contact the discharge chute that the rock was lodged in, causing a laceration to the finger and cutting the tip of the finger off.

When reattaching a spring on a conveyor the pliers slipped and the resulting release caused his hand to strike a bracket corner causing a laceration on his left index finger, requiring 9 sutures

miner was cutting rail rubber when the knife slipped and cut his thumb, requiring medical attention and received five sutures.

While cutting a v-belt off, the utility knife slipped and lacerated the left calf, resulting in an injury that required suturing of the wound.

employee hit self on shin with sledge hammer bruising shin and leg. X-ray taken showed no broken bones. employee was prescribed ibuprofen 800mg.

Cutting conveyor flashing with razor knife, slipped and lacerated right leg. Went and received medical treatment consisting of three sutures.

Snow and ice on equipment. Emp was removing ice from hopper injured index finger with the snow removal tool.

Emp was using a hammer on roller, hammer slipped and emp contacted roller injuring rignt arm.

Employee was cutting a hose with a utility knife, the knife slipped and cut the knuckle of left index finger.

Employee was opening box with a utility knife when it slipped and cut his hand.

EMPLOYEE WAS USE A CUTTING KNIFE TO CUT CONVEYOR BELT WHEN KNIFE SLIPPED CAUSING EMPLOYEE TO CUT THUMB.

EMPLOYEE WAS USING SLEDGE HAMMER TO BREAK ROCK. EMPLOYEE STRUCK RIGHT HAND WITH SLEDGE HAMMER.

The employee was tightening a tail pulley when he felt a pop in his shoulder/neck

EMPLOYEE WAS ADDING AN EXTENSION TO THE WATER TRUCK SPRAY BAR. HE HAD REMOVED THE SPRAY BAR & CLAMPED IT INTO A VISE & WAS TIGHTENING ON A NEW SECTION. THE PIPE SLIPPED OUT OF THE VISE & STRUCK EE IN THE HEAD. EE RECEIVED A CUT & SLIGHT CONCUSSION. LOST TIME.

EE was building a new conveyer. The ratchet he was using broke and ee fell into the conveyer frame, striking his right shoulder. The shoulder popped when he hit the conveyer. The Dr suspects a torn rotator cuff, is currently on restricted duty.

EE WAS SHOVELING AROUND A SHUT DOWN AND LOCKED OUT CONVEYER. HIS SHOVEL HIT SOMETHING AND JAMMED HIS SHOULDER. HE SAW AN ELECTRICAL CABLE AND ASSUMED THAT HE HAD BEEN SHOCKED. (RESTRICTED DUTY AND RX MEDS) AN ELECTRICIAN WAS BROUGHT IN TO CHECK IF THERE COULD BE ANY LIVE WIRES OR VOLTAGE TO THE FRAME AND THERE WAS NONE.

EMPLOYEE WAS HAMMERING A ROCK OUT OF THE FEEDER AND HIT HIS FOOT WITH A SLEDGE HAMMER. CONDITIONS REQUIRING REPORTING: RX PAIN KILLER/SPLINT/RESTRICTED DUTY.

EE WAS HAMMERING ON THE GATE LATCH OF THE ACCESS DOOR OF THE BELT FEEDER. THE LATCH BROKE AND STRUCK EE IN THE FACE. THIS CAUSED A LACERATION OF THE LEFT CHHEK AND ABOVE THE LEFT EYE. MEDICA L ATTENTION 13 STITCHES.

EE WAS BENDING A PIECE OF REBAR TO USE AS FILL FOR A WELD. HE STUCK THE BAR IN A HOLE IN THE WELD TRUCK AND WAS PULLING ON IT. THE BAR SLIPPED OUT OF THE HOLE AND HE WAS STRUCK BY THE BAR.

EE WAS SPLITTING A PIECE OF RUBBER HOSE WITH A UTILITY KNIFE. THE KNIFE SLIPPED OFF THE HOSE AND CUT HIS HAND.

RIGHT HAND WAS HIT WITH SLEDGE HAMMER WHILE HOLDING BAR TO CLEAR OBSTRUCTION ON CRUSHER.

EE WAS CUTTING RUBBER FLASHING FOR SCREENS USING A RAZOR KNIFE.

EE PLACED A ACK STAND UNDER THE REAR OF THE DOZER TRACK AND PINCHED HIS RIGHT THUMB, CAUSING ASEVER CUT.

THE EMPLOYEE WAS HAMMERING ON THE DOZER TRACK WHEN SOMETHING WENT INTO HIS RIGHT EYE. HE WAS WEARING HIS COMPANY SAFETY GLASSES.

EE WAS WELDING ON THE JAW FEEDER. THE COME-A-LONG BROKE & CAUSED THE EMPLOYEE TO LOSE HIS BALANCE. HE FELL 4-5 FEET & UPON LANDING INJURED HIS RIGHT WRIST.

EE WAS USING A 1"DRIVE TORQUE WRENCH TO TORQUE DOWN THE PADS ON FD-40 DOZER & HE STRAINED HIS BACK.

EE WAS USING A SLEDGE HAMMER TO UNJAM THE BOULDERS THAT WERE STUCKIN THE CONE CRUSHER. HE OVER SWUNG AND STRAINED HIS ARM.

EMPLOYEE WAS ATTEMPTING TO REPAIR THE CONE CRUSHER THEY WERE TRYING TO PULL OUT THE OLD PART & IT BECAME JAMMED HE STRUCK THE OLD PART WITH A HAMMER A PIECE OF STEEL FRACTURED OFF & PUNCTUR ED HIS ABDOMEN

EMPLOYEE WAS USING A BAR TO UNJAM ROCK WHICH WAS BRIDGED OVER IN THE CONE CRUSHER EE WAS HOLDING THE BAR & ANOTHER EMPLOYEE WAS HITTING IT WITH THE SLEDGE HAMMER THE OTHER EMPLOYEE MISSED THE BAR EE WAS HOLDING & STRUCK HIM IN THE RT FOREARM

EMPLOYEE WAS WORKING ON THE CONE CRUSHER AND HIS WRENCH SLIPPED CAUSING HIM TO LOSE HIS BALANCE. HE FELL OF OF THE CONE BACKWARDS, HE WAS ABLE TO TURN AROUND AND TRY TO CATCH HIMSELF. HE FELL 10 FEET, LANDING ON HIS FACE AND UPPER BODY.

EMPLOYEE WAS PRYING A BOULDER IN THE JAW WHEN THE BAR SLIPPED AND STRUCK HIM IN THE FOREHEAD.

EMPLOYEE WAS REMOVING THE WIPER FROM A TAIL PULLEY. HE WAS REACHING AROUND THE TAIL PULLEY WITH HIS LEFT ARM AND HIS RIGHT ARM, USING THE RACHET TO REMOVE THE NUT FROM THE BOLT. HE DISLOCATE D HIS LEFT SHOULDER.

EMPLOYEE WAS REPLACING END CAP ONTO STUB SHAFT OF COARSE MATERIAL WASHER USING A 2 POUND HAMMER. HE HAD REMOVED HIS DAR LENSED SAFETY GLASSES AND DID NOT OBTAIN OTHER AVAILABLE EYE PROTECTION . A SLIVER OF THE CAST CAP FLEW INTO HIS EYE.

EE WAS REPLACING COMPONENTS IN THE ARTICULATING AREA OF A FRONT END LOADER. THERE WAS NOT ENOUGH ROOM FOR BOTH ARMS, SO HE PLACED THE FOREARM UNDER THE WRENCH FOR MORE POWER AND LEVERAGE. WHEN HE PULLED ON THE WRENCH, HE STRAINED HIS ARM. DR AT EMERGICARE PRESCRIBED AN INFLAMMATORY WHICH TRIGGERED THIS REPORT ON THE FIRST AID CASE.

EMPLOYEE ALLEGES HE WAS USING A STEEL WEDGE CONNECTED TO A CABLE IN AN ATTEMPT TO BREAK A ROCK THAT WAS BLOCKING THE MOUTH OF THE CRUSHER. WHEN THE ROCK DROPPED INTO THE CRUSHER, IT CAUGHT THI S IMPLEMENT AND JERKED IT FROM HIS GRASP CAUSINGHIM TO EXPERIENCE PAIN IN HIS BACK AND NECK.

EMPLOYEE WAS CLEARING BLOCKED JAW CRUSHER BY BRAKING ROCK WITH A SLEDGE HAMMER. AFTER CRUSHER WAS CLEARED HE BEGAN TO NOTICE BACK PAIN.

EMP WAS USING 16# HAMMER TO BREAK ROCK THAT WAS PLUGGING CRUSHER AFTER UNPLUGGINH CRUSHER, HE NOTICED PAIN IN NECK, SHOUKDERS AND BACK HE THIOUGHT IT WOULD GO AWAY WHEN IT DIDNT HE REPORTED IT TO LEADMAN

EMPLOYEE ALLEGES HE WAS BENT OVER AND REACHING AROUND LEFT FRONT TIRE AND FRAME OF WABCO HAUL UNIT TO REMOVE BRAKE LINE FOR REPAIR. WHILE ATTEMPTING TO LOOSEN FITTINGS WITH WRENCH, HE EXPERIEN CED PAIN ALONG LEFT SIDE OF BODY.

EMP WAS CLEANING ICE FROM DISCHARGE CHUTE ON SAND SCREW PLANT #1 WHEN HE RAISED HIS RT HAND INTO A SHARP PIECE OF METAL

EMPLOYEE WAS CL9ARING BLOCKAGE FROM SCREEN DECKS WITH HAMMER ROCK AND MUD FELL FROM SCREEN INTO FACE

A LARGE ROCK HA8 PLUGGED THE FEEDER HOPPER. EMPLOYEE WAS USING A 5 FEET STEEL BAR IN HIS ATTEMPT TO PRY SMALLER ROCK FROM AROUND THE ROCK CAUSING THE BLOCKAGE. THE LARGE ROCK ROLLED AGAINST T HE BAR CAUSING 3T TO STRIKE THE EMPLOYEE.

EMPLOYEE WAS PR9PARING AN END DUMP TRAILER FOR REPAIR USING VARIOUS HAND TOOLS AND IMPLEMENTS. HE WAS REPOSITIONING A PORTION OF THE TRAILER WITH A CHAIN AND A BOOMER WHEN HE PINCHED HIS FING ER IN THE BOOME9.

EMP WAS ASSISTING CLEARING FROZEN MATERIAL FROM FEEDER WITH SLEDGE HAMMER HEAD OF HAMMER WENT BETWEEN RAILS OF FLOOR OF FEEDER AFTER BEING SWUNG EMP TRIED TO KEEP HAMMER FROM FALLING THROUGH

EMPLOYEE WAS ASSISTING IN THE INSTALLATION OF A UNIVERSAL JOINT TRYING TO ALIGN THE YOKE ON THE DRIVE SHAFT AND THE JOINT HE AND TWO FELLOW WORKERS WERE USING A STEEL BAR TO ASSIST IN THIS TAS K THE BAR SLIPPED STRIKING EMPLOYEE

USING 3 LB HAMMER TO KNOCK MUD FROM CENTER SECTIONS OF SCREEN DECK.STRUCK HIMSELF ON KNEE.

HOPPER ON RIP RAP SCREENING PLANT PLUGGED WITH LARGE BOULDERS.EMPL ATTEMPTING PRY ON ROCK WITH W/ STEEL BAR.BAR SLIPPED CAUSING EMPL TO LOSE BALANCE AND FALL ONTO OTHER ROCKS IN HOPPER.