Buscar en el registro

While using a utility razor knife to cut rubber skirting for conveyor belt, worker cut thumb when knife slipped. Worker was treated at a medical facility and received sutures.

WORKER CUT HIS FINGER WHEN THE RAZOR KNIFE HE WAS USING TO CUT A RUBBER HOSE SLIPPED. MEDICAL TREATMENT INCLUDED 5 SUTURES. WORKER RETURNED TO WORK THE NEXT DAY AT FULL DUTY.

WORKER WAS HAMMERING A WELD WHEN A PIECE OF SLAG BECAME AIRBORNE, FLEW UNDER HIS SAFETY GLASSES AND LODGED IN HIS RIGHT EYE.IMBEDDED MATERIAL HAD TO BE REMOVED BY A DOCTOR AND WORKER WAS GIVEN A PRESCRIPTION. EMPLOYEE DID NOT LOSE TIME FROM WORK.

Worker strained a muscale in his shoulder/neck area while using a prybar to move a pallet of screens.

EE was removing stone from crusher with cable and pry bar when cable slipped and bar struck EE in left shin. He received a laceration that required sutures.

Employee was unplugging a chute under the crusher when a falling rock hit his knee. He lost his footing, fell and pulled a muscle on the right side of his lower back.

EE was opening the top of a plastic container with a razor knife when knife slipped cutting his left hand. Laceration required sutures.

EE WAS USING HAND TOOLS TO TIGHTEN BOLTS ON 84" ALLIS CHALMERS CRUSHER WHEN HE EXPERIENCED BACK PAIN.

EMPLOYEE WAS STANDING ON A LADDER, TIGHTENING A BOLT. WHILE APPLYING PRESSURE TO WRENCH, THE WRENCH SLIPPED OFF THE NUT CAUSING HIS RIGHT ELBOW TO HIT A WRUNG ON LADDER; THIS RESULTED IN CONTUSION TO THE ELBOY WHICH EVENTUALLY RESULTEDIN A SUBLUXED ULNER NERVE. THIS INJURY DIDN'T BECOME REPORTABLE UNTIL FINAL DIAGNOSIS RESULTEDIN SURGERY AND LOST TIME.

WHILE PERFORMING EQUIPMENT MAINTENANCE AND SWINGING A SLEDGE HAMMER, EE'S HAND CAME IN CONTACT WITH ADJACENT PIPE RESULTING IN A LACERATION TO RIGHT INDEX FINGER WHICH REQUIRED SUTURES.

WHILE PREPARING A SECTION OF CONVEYOR BELT AND CUTTING IT TO LENGTH, EE S UTLITY KNIFE SLIPPED, STABBING HIM IN THE RIGHT KNEE. THE LACERATION REQUIRED SUTURES.

EE WAS CLEANING MUD OFF HEAD PULLEY AND SNUB PULLEY ON CONVERYOR WHEN THE TOOL HE WAS USING SLIPPED AND PINNED HIS THUMB BETWEEN THE TOOL AND THE CONVERYOR. CONVERYOR WAS NOT RUNNING.

EMPLOYEE WAS LIFTING THE PLANT FEEDER MOTOR TO REMOVE A BELT WHEN THE HOOK ON THE HAND OPERATED LEVER HOIST BROKE. HE WAS STRUCK IN THE HEAD BY THE PORTION OF THE HOOK THAT WAS STILL ATTACHED TO THE HOIST CABLE. HE RECEIVED A LACERATION THAT REQUIRED 5 SUTURES.

EMPLOYEE WAS USING A HAMMER & CHISEL TO REMOVE A BOLT WHEN THE HAMMER SLIPPED & STRUCK HIS THUMB CAUSING AN OPEN FRACTURE OF THE RIGHT DISTAL THUMB WHICH REQUIRED STITCHES.

EMPLOYEE WAS CUTTING A BOLT OFF A STEEL PLATE. AS HE CUT THROUGH THE BOLT THE PLATE SPRANG FREE & HIT & FRACTURED LEG.

EMPLOYEE WAS REPAIRING A HYDRAULIC CYLINDER. HE FILLED THE CYLINDER WITH AIR CAUSING THE PISTON TO EJECT AND PINCH HIS FINGER TIP. THIS CAUSED A SEVERE LACERATION WHICH REQUIRED STITCHES.

EMPLOYEE WAS USING A PRY BAR WHEN IT SLIPPED AND HIT HIS HEAD. HE RECEIVED A LACERATION ON HIS LEFT EYEBROW WHICH HAD REQUIRED STITCHES.

R R TRACK PULLED APART PRYING TRACK BACK IN POSITION WITH CROWBAR PULLED BACK MUSCLE

INJURED WAS TIG2TENING A LARGE BOLT WHEN WRENCH SLIPPED & HE HIT H IS LEFT INDEX FINGER & HAND INJURED WORKED FOLLOWING 2 DAYS LOST TIME BEGAN 7AM THURS.120387

EMPL HELPED DIG3STONE OUT OF CRUSHER ON 10-8 PM AND ON 10-9 FELT NUMBNESS IN RIGHT FOOT.ON 10-10 FOOT AND LEG WERE NUMB.OFFICE VISIT TO DR 10-10AM DIAG-PINCHED NERVE IN BACK.

PINCHED NERVE I3JURED WAS INSTALLING WEAR PLATES INSIDE A CRUSHER USING A SCREW JACK. HE WAS SITTING DOWN WITH HIS BACK BRACED AGAINST TEH CRUSHER PUSHING ON THE JACK HANDLE WITH HIS FEET TH EY SLIPPED OFF 7HE HANDLE.

INJURED WAS CUTTING INTO AN AIR BUBBLE ON A RECAP 18:00X25 TIRE. THE SIDEWALL OF THE TIRE BLEW OUT, KNOCKING HIM ABOUT 30 FEET AND CUTTING HIS RIGHT HAND.