Buscar en el registro

Teammate was punching out the DR101 inlet chute and smashed their (L) pinky finger in between the poker t-handle and the safety bar in the chute. When the buildup broke loose while poking the downward motion of it pulled their hands with momentum into the bar smashing (L) pinky finger. Teammate received medical, stitches to finger and release back to work.

EE cutting straps off bundle of bulk bags when box cutter slipped up the strap cutting his left index finger. Required 4 sutures and EE was released with no restrictions.

Removing belts using pry bar when pry bar slipped and twisted his left arm. Tendonitis of left elbow no restrictions. Become reportable injury 4/29/10 when doctor gave him cortisone shot.

Employee was removing motor from dryer combustion fan using a pry bar. Left hand was caught between pry bar and flange on gas line. Left hand contusion & superficial laceration. Light duty and limited use of hand.

Using left hand he was holding a battery terminal in a hammer crimper & using right hand struck crimper with 2# hammer hitting left thumb. Fracture & lcerations to left thumb. No lost time just restricted.

Injury was working on photo-eye problem on 3 bag stacker. He was flagging photo-eye with screw driver in rt hand on his attempt to flagging w/screwdriver he got his rt ring finger caught between top of stacking device & frame of machine-laceration requiring sutures.

Attempting to remove bolt with wrench from the coverplate on Wms Mill sump pump, the wrench slipped which caused employee's weight to shift to right shoulder. The pain was not evident at first but got worst during the night. Dr suspected rotator cuff tear, the MRI results confirmed on 10/30/08 (Dr diagnosis). Employee opted to physical theraphy vs seeing orthorpedic doctor.

Employee was using a razor knife with left hand cutting stretch wrap from a pallet & cut his right index finger. Required several sutures. No restrictions, returned to normal duties.

EE slipped and fell to his right knee when rigging slipped. This caused a spain to his knee. EE improperly rigged cable-come-a-long to beam. Rigging slipped causing him to lose his balance.

EE WAS UNDER PLASTIC FILM WRAPPER CUTTING FILM AWAY FROM SHAFT, GOT FOREIGN OBJECT IN RIGHT EYE. HE WAS WEARING HIS SAFETY GLASSES.

THE EMPLOYEE WAS ATTEMPTING TO REMOVE A DUST COLLECTOR SCREEN WITH A PRY BAR WHICH SLIPPED FROM HIS HAND AND STRUCK HIS SAFETY GLASSES, PUSHING THEM INTO HIS LEFT CHEEK CAUSING A SMALL CUT UND ER HIS LEFT EYE. HE RECEIVED 4 STITCHES AND WAS RELEASED TO HIS NORMAL DUTIES.

EE WAS ATTEMPTING TO MOVE A PALLET OF BAGS WITH A PALLET JACK WHEN SHE EXPERIENCED PAIN IN HER RIGHT SHOULDER. SHE RECEIVED MEDICAL ATTENTION ON 7-17-01 AND WAS GIVEN LIGHT DUTY. ON 7-30-01 HE R CONDITION WAS FURTHER DIAGNOSED AS REQUIRING PHUSICAL THERAPY THEREBY RESULTING IN A REPORTABLE ACCIDENT AS OF 7-31-01.

THE OPERATOR WAS ATTEMPTING TO REPLACE AUGER ON A GRIT SCREW USING A PIPE WRENCH WITH AN EXTENSION PLACED OVER THE PIPE WRENCH HANDLE FOR LEVERAGE. COWORKER WAS ASSISTING IN THE REMOVAL OF THE AUGER BY HAMMERING ON THE EXTENSION TO LOOSEN THE AUGER. THE OPERATOR'S HAND SLIPPED FROM THE PIPE WRENCH AND WAS CAUGHT BETWEEN THE PIPE WRENCH AND THE AUGER, TEARING HIS FINGERNAIL.

EE WAS IN THE PROCESS OF MAKING A BATCH OF SLURRY. SHE CUT A BAG OF CAUSTIC SODA OPEN TO ADD TO THE BATCH AND SOME OF THE GRANULES GOT INTO HER LEFT EYE. SHE IMMEDIATELY BEGAN FLUSHING THE EYE WITH WATER AND WAS TAKEN FOR FURTHER MEDICAL ATTENTION.

EE WAS USING A METAL RAKE TO CLEAN UP DEBRIS UNDER A BELT IN HIS WORK AREA. AS HE CONTINUED THE RAKING MOVEMENTS HE FELT PAIN IN HIS RIGHT FOREARM. HE REPORTED THE INJURY ON 10/17/00 AND WENT TO THE DR AND WAS DIAGNOSED AS HAVING A PULLED TENDON OR SPRAIN.

HOPPER TO #1 DISENTEGRATOR WAS CLOGGED W/ CLAY. EE USED A WOODEN FLAT HEAD SPADE TO CLEAR CLOG. HE USED THE REVERSE END OF SPADE INSEAD OF METALEND. THE BARS ON ROLLER CAUGHT HANDLE CAUSING IT TO JERK DOWN AND THE STEEL END OF SPADE HIT TOP OF HIS RIGHT HAND CUTTING AND BRUISING IT. AFTERACCIDENT SUPV. CHKD AREA AND & FOUND THE BELTS WERE OFF OF THE BOTTOM ROLLERS AND THAT IS WHY H

SEE ATTACHED: EE WAS SCRAPING HOPPER & HER BACK STARTAED HURTING. EE REPORTED THIS TO SUPERVISOR. EE WAS TAKEN TO ER DUE TO THE TIME OF THE INJURY. DR AT ER SAID NOT TO WORK OF 2 DAYS, GAVE A PRESCRIPTION, LIFTING RESTRICTIONS OF -5 LBS, LIMITED USE OF R HAND. EE WORKS ROTATING SHIFT, LOST NO TIME, WAS SENT TO CO DR. WHERE EE COMPLINED OF SEVERAL DIFFERENT PAINS INCLUDING R SHOULDE

EE & COWORKER WERE IN A CSXT RAILCAR TRYING MOVEA BULKHEAD DOOR THAT WAS JAMMED. THE RELEASE LEVER WAS INTHE MIDDLE OF THE DOOR AND EE HAD A CROWBAR TRYING TO APPLYMORE PRESSURE WHEN SUDDENLY THE DOOR BROKE FREE AND PUSHED EE INTO THE OTHERBULKHEAD DOOR CAUSING EE TO HIT HIS RIGHT SHOULDER ON THE DOOR. EE WAS SENT TO DR AND DIAGNOSIS WITH CONTUSION OF RIGHT SHOULDER RESTRICTED DUTY

EE WAS DISMANTLING A BELT BY PULLING ON REMOVABLE SECTIONS WITH A SET OF PLIERS. THE PLIERS SLIPPE CAUSING EE'S RIGHT INDEX FINGER TO STRIKE A GUARD RAIL. TWO DAYS LATER HIS FINGER WAS SWOLLEN & PAINFUL SO HE WAS TAKEN TO DR. DR DX ABCESS W/STAPH & SECONDARY CELLULITIS.

EE WAS LFTING BOTTOM OF OMW MACHINE WITH AN IRON BAR USING HIS RIGHT HAND. HE STUCK HIS LEFT HAND UNDER THE MACHINE TO FIX A PROBLEM & THE MACHINE SLIPPED OFF THE BAR & FELL ON HIS LEFT WRIST. SUPERVISOR PUT ICE PAK ON IT, WRAPPED WITH BANDAGE & GAVE HIM TYLENOL. NEXT DAY HE WENT TO THE DR. & HE HAD A HEMATOMA/ABRASION. DR. PUT A SPLINT ON HAND & LIMITED USE OF HAND FOR 3 DAYS.

EE WAS CLEANING LABELS OFF OF LABEL MACHINE ROLLER WITH A KNIFE ROLLER HAD ABOUT 10 LABELS WRAPPED AROUND IT HE WAS HOLDING THE ROLLER WITH HIS THUMB & MIDDLE FINGER (ON LEFT HAND) WHILE CUTTI NG THE LABELS WITH RT HAND THE KNIFE SLIPPED & CUT FINGER ON LEFT HAND (LEFT HAND LEFT MIDDLE FINGER BETWEEN FIRST & SECOND JOINT) THE CUT REQUIRED SUTURES

EMPLOYEE WAS SPLITTING A SHEET OF PALKOR INTO TWO PIECES WITH AN IRON BAR. THE BAR HIT THE FLOOR OF THE RAILCAR AND BOUNCED UP OUT OF HIS HAND INTO HIS RIGHT SHOULDER ABOVE HIS COLLAR BONE. EM PLOYEE WAS PUT ON LIGHT DUTY FOR FOUR DAYS.

EMPLOYEE WAS ASSISTING IN PLACEMENT OF STEEL MEMBER OF TANK CONE. THE FIT WAS TIGHT AND TH EMEMBER WAS BEING DRIVEN INTO POSITION BY ANOTHER EMPLOYEE USING A SLEDGE HAMMER. A HAMMER BLOW STR UCK THE TANK CONE AND GLANCE DOFF, STRIKING INJURED ABOVE THE EYE. EMPLOYEE'S HARD HAT PREVENTED HIM FROM RECEIVING FULL IMPACT OF THE HAMMER. EMPLOYEE SUFFERED CUT & CONTUSION TO LEFT EYEBR

EMPLOYEE WAS ATTEMTPING TO REPLACE A BROKEN BOLT ON AFEEDER. THE PRY BAR SLIPPE DNA DHIT HIM IN THE MOUTH. THERE WERE NOT RESTRICTED DAYS OR LOST DAYS. THE EMPLOYEE RECEIVED A BROKEN TOOTH AND A CROWN WAS REQUIRED.

WHILE PULLING CONCRETE HOE THROUGH CONCRETE IN PROCESS OF SMOOTHING OUT CONCRETE. EMPL USED IMPROPER TECHNIQUES FOR PERFORMING JOB.

EMPLOYEE WAS CUTTING TWO BAGS THAT WERE SEWN TOGETHER ON LINE #3 WITH HIS POCKET KNIFE THE BAGS CUT APART & CAME UP & CUT HIS HAND

EMPLOYEE WAS ADJUSTING CARRIAGE WHEEL ON OMW WHEN WRENCH SLIPPED CAUSING ELBOW TO GET HIT. LUBRICANT ON WHEEL CAUSED IT TO BE SLICK CAUSING WRENCH TO SLIP.

EMPLOYEE WAS ATTEMPTING TO FREE SEIZED BOLT W/WRENCH. HE APPLIED PRESSURE W/FOOT. WRENCH SLIPPED FROM BOLT & CAUSED EMPLOYEE TO FALL-5'. EMPLOYEE INJURED RT-ANKLE.

WHILE BREAKING LOOSE A ONE INCH BOLT THE WRENCH SLIPPED OFF OF THE BOLT HEAD CAUSING PAIN IN HIS RT ELBOW HE DID NOT HIT ANYTHING

USING HAMMER TO REMOVE JOINT FROM SHAFT FRAGMENTS HAMMER BROKE OFF ENTERED L FOREARM ONE PC IS DEEPLY EMBEDDED

EMPLOYEE WAS TIGHTENING A PULLEY ON A SHREDDER WHEN THE WRENCH SLIPPED AND HE PINCHED HIS LETTLE FINGER ON THE RIGHT HAND BETWEEN THE WRENCH AND THE SHREDDER. HE DEVELOPED A HEMATOMA UNDER TH E FINGER NAIL THAT HAD TO BE EVACUATED. HE RETURNED TO NORMAL DUTY.

EMPLOYEE WAS CHANGING SCREENS WHEN A PIECE OF CLAY GOT INTO HIS RIGHT EYE. HE WAS WEARING EYE PROTECTION. CLAY HIT ROTEX AND BOUNCED UP INTO HIS EYE. HE WASHED HIS EYE OUT AT THE PLANT, BUT IT CONTINUED TO BOTHER HIM AT HOME THAT EVENING. THE NEXT MORNING HIS EYE WAS RED AND PAINFUL. HE WAS SENT TO THE EYE DOCTOR AND A FOREIGN BODY WAS REMOVED AND EYE OINTMENT PRESCRIBED.

EMPL MAKING BOXES USING HOT-GLUE GUN.THE GLUE SPURTED FROM GUN CAUSING 1ST & 2ND DEG.BURNS TO 4TH AND 5TH FINGER LEFT HAND.TREATED WITH 1ST AID AT PLANT,SENT TO DR FOLLOWING DAY.SHE WAS TREATE D WITH RX MEDS,TET.TOXOID,RESTRICTED DUTY.

CONSTRUCTION CREW EMPLOYEE WAS REMOVING A GASKET FROM A MA-TRAM PIPE WITH A FOLDING POCKET KNIFE. THE KNIFE FOLDED DOWN OVER HIS RIGHT FIRST FINGER, LACERATING THE KNUCKLE. THE 2 CM LACERATION WAS CLOSED WITH TWO SUTURES. WOUND WAS DRESSED. HE RETURNED TO WORK THE SAME DAY, NO LOST TIME, HE RESUMED HIS REGULAR DUTIES.

POKE HOLE I N BAG TO RUN ROPE THROUGH TO CLOSE BAG POCKET KNIFE SLIPPED CUT L INDEX FINGER. LACERATION REQ SEVERAL STITCHES. FULL DUTY NEXT DAY

EMPLOYEE WAS TIGHTENING THE HYDRAULIC LINE ON A FORKLIFT WHEN HIS WRENCH SLIPPED,HIS FEET THEN SLIPPED IN SOME OILY FLUID ON THE GROUND AND HE STRUCK HIS RIGHT HAND AGAINST A PART OF THE FORKL IFT,CAUSING A BOXERS BREAK OF FIFTH METACARPAL OF THE HAND.HE IS IN AN ULNA GUTTER SPLINT FOR THE NEXT SEVERAL WEEKS.HE IS ABLE TO WORK AS LONG AS HE DOES NOT STRENUOUS LIFTING OR WORK WITH H

EMPLOYEE CLAIMS HE WAS USING HAMMER TO REMOVE A BEARING OFF A CONVEYER WHEN A PIECE OF THE BEARING BROKE OFF AND CUT HIS INDEX FINGER. HE DID NOT SEEK TREATMENT AT THE TIME. HE NOTICED RECENTL Y THAT HTE FINGER WAS SWOLLEN AND TENDER. HE REPORTED THIS TO THE CO ON 3-29-89 AND WAS REFERREED TO THE DR 03-31-89 THE FINGER WAS X RAYED METALIC FOREIGN BODY FOUND. FOREIGN BODY WAS REMOVE

EMPLOYEE WAS CH5NGING ROTEX SCREEN HOOK OF CHAIN HOIST CAME LOOSE AND STRUCK EMPLOYEE IN THE FOREHEAD ABOVE LEFT EYE LACERATION REQUIRED 5 STITCHES TO CLOSE

BENDING RIGID C2NDUIT WITH PIPE BENDER, SOMETIME LATER FELT PAIN IN ABDOMEN. WAS SENT TO DOCTOR FOR EVALUATION. PUT ON PRESCRIPTION ANTI-INFLAMMATORY MEDICATION.

DATE OF I NJ IS3 APPROXIMATE EMP STATES HE RECEIVED A SLIGHT SHOCK WHILE SERVICEING A CONVEYORC WHEN HE JERKED HIS HAND AWAY HE STRUCK HIS ELBOW ON THE CONVEYOR. A FEW WEEKS LATER HE BEGAN TO NOTICE PAIN 3N RT ARM WHEN DOING HEAVY LIFTING HE WAS REFERRED TO COMPANY DR WHO TREATED HIM FOR EXTENSOR TENDINITIS ( TENNIS ELBOW) INJURY WAS NOT REPORTED UNTIL 01 19 87

EMPLOYEE WAS US3NG A WRENCH TO ADJUST THE MILLS WHEN HE STRAINED HIS BACK

EMPLOYEE WAS SW9EPING SPILLAGE OUT FROM UNDER DRYER WHEN HIS ARM STRUCK A PIECE OF JAGGED ANGLE IRON RAIL CAUSING A LACERATION WHICH WAS CLOSED WITH 4 STITCHES IN THE EMERGENCY ROOM

EMPLOYEE SUFFERED A MODERATELY SEVERE LOW BACK STRAIN WHILE ATTEMPTING TO PULL A CLUMP OF CLAY ONTO THE BELT AT THE PRIMARY SHREDDER WITH A PICK.

CHANGING OUT ROLLER ON 6 MILL UNBOLTING SIDE PLATE ON MILL, SIDE CAME DOWN AND FELL, PINCHING FINGER AGAINST ADJACENT BRACKET, CAUSING CRUSH INJURY TO THIRD FINGER LEFT HAND.

AUTOMATIC SEWING MACHINE FAILED TO CLIP TAPE BETWEEN SEWN BAGS.EMPL ATTEMPTING TO CUT TAPE APART WITH POCKET KNIFE WHEN HE ACCIDENTLY CUT HIS FINGER.HE REPORTED INCIDENT TO SUPV.BUT DIDNT REQU EST TREATMENT UNTIL 9-17-84.HE WAS REFERRED TO DR FOLLOWING DAY AND WAS TREATED FOR AN INFECTED LACERATION.