Buscar en el registro

Employee was torquing terciary crusher liner segment bolts with a hydraulic torque wrench. When the wrench was operated it slipped and squeezed his right hand's index and middle finger against the wall of the crusher.

EMPLOYEE WAS USING A PRY BAR TO DISLODGE ROCK IN A DIVERTER AND THE SLIDE GATE CAME DOWN ON HIS RIGHT WRIST. EMPLOYEE FAILED TO DE-ENERGIZE THE EQUIPMENT AN VIOLATED THE COMPANY LOCKOUT/TAGOUT POLICY AND PROCEDURES. HE WAS PLACED ON MODIFIED WORK.

EE WAS LOOSING A PLUG ON A GEAR BOX WHEN HIS HAND SLIPPED OFF OF HIS WRENCH AND HIS LEFT ELBOW STRUCK THE EDGE OF A BELT GUARD ON CONVEYOR 40117. MEDICAL TREATMENT WAS NOT REQUIRED UNTIL 10-2 3-03, AT WHICH TIME IT BECAME REPORTABLE. EE WASPLACED ON MODIFIED WORK.

EE WAS LOOSENING A CONVEYOR TAIL PULLEY WHEN THE ADJUSTING NUT CAME LOOSE AND THE EMPLOYEE'S HAND SLIPPED, STRIKING THE BACK OF HIS FOREARM ONTO THE CONVEYOR FRAMEWORK.

EE WAS USING A STEEL BAR TO DISLODGE ROCKS AT THE TRANSFER POINT OF CONVEYOR 103. EE HIT HER HAND ON THE INSIDE OF THE STEEL ROCK BOX.

EE HOOKED TWO CHAIN HOISTS TOGETHER TO PULL A HOPPER LINER INTO PLACE. THE HOOK ON ONE OF THE VCHAIN HOISTS SPREAD OPEN, RELEASING IT FROM THE OTHER CHAIN HOIST, AND HIT THE EE ON THE RIGHT LE G.

EE WAS PULLING A JACK OFF OF A JACK STAND, IT TIPPED, AND SMASHED THE MIDDLE FINGER OF HIS LEFT HAND

EE WAS ATTEMPTING TO DISLODGE 50 LBS BAGS OF CALCIUM CARBONATE OUT OF A CHUTE. HE WAS USING A SCRAPER TOOL AND ONE OF THE BAGS FELL ON THE HANDLE CAUSING THE SCRAPER PORTION OF THE TOOL TO BOU NCE UP AND HIT HIM IN THE FACE.

EMP WAS TRYING TO UNLATCH A HOPPER WITH A BAR AND AS HE PUSHED UPWARD, HE HEARD HIS LEFT WRIST POP.

EMP WAS STANDING BENEATH AN 85 TON TEREX HAUL TRUCK. HE HAD HIS KNEES BENT SO HE COULD LOOK AT THE ENGINE. TWISTED TO GRAB TOOL AND HEARD HIS KNEE POP.

EMPLOYEE WAS SECURING A FRAME HOUSING TO A HAULAGE TRUCK WITH A CHAIN BINDER. THE HANDLE OF THE CHAIN BINDER SLIPPED AND HIT EMPLOYEE'S FACE. THE BLOW TO THE EMPLOYEE'S HEAD AREA KNOCKED HIM OUT. THERE WERE NO FACIAL, HEAD, OR NECK FRACTURES. EMPLOYEE SUSTAINED A LACERATION TO THECHIN AREA AND ONE BROKEN TOOTH AND TWO CHIPPED TEETH.

EE WAS CHANGING TEETH ON A LOADER. THE LOADER BUCKET WAS RAISED APPROX. 31/2 TO 4 FEET HIGH. EE PLACED THE REPLACEMENT TEETH ON BUCKET AND AS HE WAS HAMMERING ONE OF THE PINS IN A TOOTH, ANOTH ER ONE FELL OFF AND ONTO HIS LEFT FOOT. EE WAS WEARING STEEL TOE BOOTS. FOOT WAS INJURED ABOVE THE STEEL SECTION.

EMPLOYEE WAS KNEELING ON GROUND, PLACED A 24" PIPE WRENCH ON A FITTING ON AN ANTI-FREEZE PUMP AND BEFORE HE ATTEMPTED TO LOOSEN THE FITTING, HE HAD A MUSCLE SPASM IN HIS BACK AND FELT A SHARP PAIN.

CUTTING HOSE WITH CUTTERS HIT FRONT TOOTH WITH CUTTERS

USING PRY BAR TO UNPLUG RECLAIM SYSTEM

CHANGING BEARINGS ON CLASSIFIER USING CHISEL PC OF METAL WENT IN L HAND. MED TREAT TO REMOVE FOREIGN BODY.

OPERATING STAPLER WITH HER RIGHT HAND CASUED INFLAMATION AND SWELLING OF MIDDLE JOINT OF THE RING FINGER OF HER RIGHT HAND.

MAKING REPAIRS TO PROCESS MACHINE THE MAN PULLED UPON A WHEEL PULLER TO PROPERLY ALIGN THE PULLER CAUSING A STRAIN TO HIS LOWER BACK

EMPLOYEE WAS BE3DING CONDUIT WITH A MANUAL CONDUIT BENDER WHEN THE BENDER SLIPPED & CAUSED HIM TO STRIKE HIS RIGHT HAND AGAINST A GUARD RAIL.

EMPLOYEE WASMOVING A 55 GAL. DRUM OF ANTIFREEZE FROM TRUCK BED USING A DRUM - HANDLING TOOL. THE TOOL SLIPPED OFF THE DRUM WHILE THE EMPLOYEE\S BODY WEIGHT WAS BEING USED AS LEVERAGE THUS CAUS ING THE EMPLOYEE TO FALL BACKWARDS AND OFF THE TRUCK.