Buscar en el registro

TM was stripping wire insulation with a utility knife when the employee cut the pad of left thumb.

EE was loosening a cap to check oil on the Liebherr Drag Line when the crescent wrench slipped off and the hose clamp cut EE's left wrist. The cut was deep, EE received 6 stitches.

EE was standing on a platform installing a threaded plug in the motor junction box using a pipe wrench. They had their left foot up one step on motor platform and right foot on the platform EE was standing on and while pulling the pipe wrench towards them they felt a pop and discomfort in right knee. Become a recordable on 12/1/2022 when cortisone shot was received.

Employee was removing an excavator tooth shank from the excavator bucket. Employee air arced existing welds and EE struck the shank with a 16 lb sledge hammer. The hardened steel sledge caused a piece of hard facing to chip off of shank and embedded in right thigh. Had foreign body removed on 8/18/17 with stitches - 1 day lost time.

The dredge bucket ladder chain had walked off the ladder flat idlers. To realign the chain back on, employee used a 4x4 to lay between rock gravel and chain which will force chain back on. As he was holding the 4x4 his left ring finger was mashed against the chain. Laceration - received stitches (3).

EE was shoveling off the cat walk when he struck the side and his forward shoveling motion was abruptly stopped causing injury to left wrist.

CHANGING A SPRAY BAR NOZZEL, HE WAS LYING OVER A TUBE PULLING ON A PIPE WRENCH WHEN HE PULLED A MUSCLE IN HIS UPPER STOMACH, LEFT SIDE.

EE WAS LOOSENING A BOLT WITH A RATCHET WHEN RATCHET SLIPPED MASHING HIS LEFT PRIMARY FINGER BETWEEN RATCHET AND WALL.

EMPLOYEE WAS USING RAZOR KNIFE TO CUT BELT, WAS PULLING KNIFE TOWARD HIM, KNIFE SLIPPED, CUT LIGAMENTS IN KNEE.

EE WAS TRYING TO DISLODGE A ROCK IN A JAW CRUSHER USING A SPUD BARD CAUGHT THUMB BETWEEN BAR & SIDE OF CRUSHER, BROKE RIGHT THUMB

EE WAS USING A PRY BAR TO LINE UP A NEW SCREEN DECK THE DECK SLIPPED PUNCHING HIS INDEX FINGER WITH THE PRY BAR CUTTING FINGER

EE WAS CARBON ARCING A RAIL FROM ANOTHER PIECE OF METAL. HE TAPPED THE RAIL WITH A HAMMER TO SEE IF IT WAS LOOSE, THE RAIL APPROX. 150#, FELL STRIKING HIM ACROSS BOTH SHINS AND ON THE LEFT ANK LE. RECEIVED 4 STITCHES BELOW LEFT KNEE AND BRUISED ANKLE.

EE WAS SPLICING BELT CUTTING TOWARD HIMSELF WITH RAZOR KNIFE SLICED INDEX FINGER LEFT HAND, TOOK EIGHT STITCHES.

EMPLOYEE WAS MOUNTING A COVER TARP OVER CONVEYORTO SPLICE BELT. TARP DID NOT HAVE TIE DOWN RINGSEMPLOYEE USED KNIFE TO CUT TIE DOWN HOLE AND CUTFINGER.

EMPLOYEE WAS HOLDING PORTA-POWER IN PLACE WHILE APPLYING TENSION BETWEEN PORTA-POWER AND HITCH PIN ON DOZER. PORTA-POWER SLIPPD AND STRUCK LEFT THUMB AND NAIL.

EMPLOYEE WAS CUTTING BELT AT SAND PLANT, KNIFE SLIPPED AND CUT RIGHT LEG.

EMPLOYEE WAS WELDING & WHEN CHIPPING THE SLAG A METAL CHIP LODGED IN RIGHT EYE.

EMPLOYEE WAS GREASING THE TRACKS ON THE DRAGLINE AND WHEN HE BENT OVER HE PULLED MUSCLES IN HIS BACK.

EMPLOYEE WAS STRIKING PRY BAR WITH HAMMER. HAMMER SLIPPED & STRUCK EMPLOYEE IN LEFT KNEE.

EE WAS INSTALLING ENGINE IN PICK UP TRUCK USING A RATCHET RATCHET SLIPPED AND EE S RIGHT ELBOW STRUCK CONCRETE PIT WALL ACCIDENT OCCURRED ON 5-5-92 MEDICAL TREATMENT WAS LIMITED TO FIRST AID U NTIL 5-28-92. INJECTION WAS GIVEN ON 5-28-92 ANDREPORTED 6-25-92.

EMPL CLEANING FLOOR IN DRAGLINE WHEN A BLOOD VESSEL BURST IN LEFT EYE.

EMPLOYEE WAS WHITEWASHING SHOP WHEN EXCESS AMOUNT OF WHITEWASH DRIPPED FROM CEILING AND SPLASHED INTO EMPLOYEES EYES.

CLEANING SCALES,HOSE SLIPPED OUT OF HAND AND NOZZLE STRUCK BACK OF RIGHT HAND.

ROCK JAMMED IN CRUSHER WAS ATTEMPTING TO PRY ROCK LOOSE PRY BAR KICKED BACK FORCING LEFT HAND INTO WALL OF CRUSHER THUR INJURING HAND.

EMPL WAS USING WRENCH PULLED TOO HARD WRENCH SLIPPED & HIT HIMSELF IN FOREHEAD.

USING A SHOVEL TO CLEAN UP.

CLEANING OUT HOPPER WITH PRY BAR. BAR SLIPPED, WRIST WAS THROWN BACK AND INJURED.