Buscar en el registro

TRYING TO UNPLUG GYPSUM HOPPER BY BEATING ON HOPPER WITH BAR AND SPRAINED LOWER BACK.

USING 4# SLEDGEHAMMER TO HIT IRON ORE HOPPER REPETITIVELY AND STRAINED HAND. RESTRICTED DUTY.

SHOVLING ON BURNER FLOOR AND STRAINED LEFT ARM.

SLIDING MOTOR OFF OF A PAD & BAR SLIPPED. HE SPRAINED RIGHT ELBOW RESULTING IN RESTRICTED DUTY.

ADJUSTING ROLLSON COAL MILL AND STRAINED RT. SHOULDER.

HITTING PIPE WRENCH WITH PALM OF HAND CAUSED CONTUSION.

EE WAS STANDING ON TEMPORARY SCAFFOLD AND WAS USING A PRY BAR WHEN HE FELL 3'. PRY BAR STRUCK HIM ON TOP OF HIS HEAD. HE BRUISED HIS HIP IN THE FALL.

CUTTING RUBBER TO MAKE A SLEEVE AND KNIFE CUT THROUGH RUBBER CUTTING LEFT INDEX FINGER REQUIRINGSTITCHES.

KNOCKING DOWN DOORS WITH HAMMER AND STRAINED BACK.

CUTTING BOX WITH KNIFE AND CUT LEFT INDEX FINGER.

CUT HAND ON PIECE OF METAL.

STRUCK MILL LINER W HAMMER, WHEN IT SWUNG LOOSE IT STRUCK EE IN CHEST, CAUSING CONTUSION TO CHEST AND SHOULDER.

USING PRYBAR TO POSITION A PLATE, PLATE SLIPPED, A PIECE SHIPPED OFF AND STRUCK EE IN FACE.

ALIGNING MILL LINES WITH SLEDGE HAMMER & A PIECEOF METAL CHIPPED OFF

EMPLOYEE WAS UNLOADING LUMBER AND HAD TO PRY ON GRATE TO GET CHOKER UNDER IT DUE TO THE WAY THE TRUCK WAS LOADED, THE PRY BAR SLIPPED AND HE FELL OFF THE TRUCK ONTO HIS SHOULDER AND HEAD.

WHEN STRIKING PUNCH WITH BALL PING HAMMER--METAL FRAGMENT OF HAMMER STRUCK RIGHT FOREARM.

WAS PREPARING WIRE CABLE FOR INSTALLATION. CUT FINGER WITH KNIFE.

ALIGNING COUPLING ON PRELL TRUCK SCREW. DRIVING BOLT THROUGH SCREW SHAFT. STRUCK FINGER WITH HAMMER.

ATTEMPTING TO REVERSE MECHANICAL SCREW PUMP WITH STEEL BAR. BAR SLIPPED, REVERSED, STRUCK EE IN MOUTH.

WAS CUTTING CONVEYOR BELT WITH BOX KNIFE KNIFE SLIPPED CUT LEFT KNEE

WHEN HAMMERING PIN INTO STEEL STRAP THE STEEL SPLINTERED AND FRAGMENT PIERCED RIGHT FOREARM .

EE WAS IN SQUATTING POSITION PULLING WRENCH APART WITH ARMS ACROSS CHEST, FELT BURNING THEN PAIN IN MID BACK.

WAS CUTTING VAC ALL HOSE WITH BOX KNIFE, KNIFE SLIPPED AND CUT TOP OF FINGER.

WAS DOWN ON KNEES USING SLEDGE HAMMER TO DRIVE ROD THROUGH WET, CLOGGED MATERIAL FELT SHARP PAIN IN LOWER BACK. DULL PAIN PERSISTS PARTICULARLY MID TO LEFT LUMBAR REGION.

WAS UNPLUGGING RAIL SILO SPOUT. OPENED PORT HOLE. CEMENT POURED OUT ONTO EMPLOYEE.

WAS RAISING MOTOR WITH HOIST; CHAIN BROKE HOOK SWUNG AND STRUCK EMPLOYEE IN NOSE.

STRUCK LITTLE FINGER AGAINST METAL RING.

STRIKING WALL OF HOPPER WITH 3LB SLEDGE HAMMER-STRUCK FINGER AGAINST METAL RIDGE THAT LINES HOPPER.

WAS INSPECTING AN OPERATING CRAIN DRIVEN ROTARY VALVE, HAD GUARD OFF, CAUGHT FINGER IN CHAIN SPROCKET.

61202WEEPING CEMENT, FORCE CAUSED WOODEN SPLINTER FROM BROOM HANDLE TO STRIKE HAND.

61202TRIKING BEARING IN A HOUSING WITH A HAMMER BEARING BROKE, FRAGMENTS STRUCK LEFT FOREMAN.

TAMPING IN BLUE RAM AFTER WORKING FOR SOMETIME-DAYS IT CAUSED SWELLING AND ACHING IN ARM AND HAND.GRADUALLY GOTTEN WORSE.

WAS HAMMERING ON MILL LINER BOLT. HIT LINER AND METAL FRAGMENT OF LINER STRUCK RIGHT THIGH.

WHEN PULLING ON MAINTENANCE TOOLS EG (WRENCHS) FEELS PAIN IN LEFT ELBOW.

USING A PRY BAR TO MOVE COAL ROLL EMPLOYEE FELT PAIN IN LOWER BACK.

EE WAS USING A PRY BAR TO TURN A CRANE DRUM. HE IS MISSING TWO FINGERS ON THE HAND HE WAS USING THE BAR SLIPPED FROM HIS GRIP AND STRUCK HIS LITTLE TOE ON HIS LEFT FOOT HE WAS WEARING SAFETY C HOES.

EMPLOYEE WAS BUILDING A GUARD.HE CUT OUT A PICE OF METAL WITH A TORCH AND STRUCK IT WITH A HAMMER.IT FLIPPED AND HIT HIM ON THE THUMB.

EMPLOYEE WAS REMOVING BEARING FROM HOUSING USIG A 8#HAMMER & A SHAFT THEREWAS A BURR ON THE SHAFT & IT SLIPPED THROUGH HIS HAND CUTTING IT BETWEEN THE THUMB & INDEX FINGER REQUIRED FIVE STITCH ES

EMPLOYEE WAS LIFTING CAHIN HOIST OVER KILN DUST ELEVATOR AND STRAINED HIS BACK.HE WAS GIVEN A 40LB WEIGHT RESTRICTION BUT WE HAD NOT WORK FOR SUCH A RESTRICTION.

EMPLOYEE WAS USING PRY BAR TO FREE SHALE STARVATION. A ROCK FLIPPED UP AND STRUCK HIS MOUTH.

USING DRILL WHICH HUNG UP, JERKING ARM AND SHOULDER

EMPLOYEE WAS PULLING ON NUTS AND BOLTS WITH A WRENCH AND FELT PAIN IN HIS NECK AND LEFT SHOULDER.

EMPLOYEE STATES HIS HAND SLIPPED WHILE USING A WRENCH AND CUT HIS FINGER. HE DID NOT REPORT THE INJURY UNTIL 2-13-90 WHEN IT BECAME INFECTED.

REMVOING PUMP LINE PUMP PULLED OUT HOLE SET ASIDE, AS HE PLACED POST HOLE DIGGER IN BOTTOM OF SUP HE STRUCK THE LINE WITH HAND TENSION CAUSED THE LINE TO POP STRIKING HIM ON THUMB

EMPLOYEE WAS SWEEPING IN THE LIME TUNNEL AND HE ATTEMPTED TO CUT A WEDGE TO FIT A BROOM HANDLE AND CUT HIS THUMB BY ACCIDENT. HE WAS TAKEN TO PLANT DOCOTR AND RECEIVED SEVERAL STICHES.

EMPLOYEE WAS USING PRY BAR TO REMOVE BRICK AND COATING IN KILN, BAR BECAME WEDGED THEN AVE AS PULLED ON IT. WHEN IT GAVE HE FELL, STRIKING UNEVEN BOTTOM SURFACE OF KILN.

EMPLOYEE WAS PRYING ROCK OUT FROM UNDER STRIKER GATE ON #5 LIMESTONE FEEDER #2 RAW MILL THE 16# SCREWDRIVER HE WAS USING SLIPPED & PINCHED RIGHT THUMB AGAINST STRIKER GATE

EMPLOYEE WAS MOWING GRASS WITH A PUSH MOWER WHEN SOMETHING FLEW UP AND STRUCK HIS EYE. HE WAS WEARING SAFETY GLASSES AT THE TIME.

EMPLOYEE WAS HOLDING A WRENCH FOR ANOTHER EMPLOYEE TO HIT WITH A SLEDGE HAMMER. THE HAMMER SLIPPED AND HIT THE EMPLOYEE ON THE HAND. HE REQUIRED SUTURES TO CLOSE THE WOUND.

INSTALL. RING IN CHAIN SECTION OF KILN WITH ANOTHER EMP. OTHER HAMMERING ON RING WITH SLEDGEHAMMER. STANDING ON ONE SIDE OF SLOPING KILN SHELL AND AS HE SWUNG SLIPPED SLEDGEHAMMER STRUCK THE I NJ IN MOUTH.