Buscar en el registro

Mechanic cut hand while removing tie wrap

TWO DRILLERS WERE SCREWING DRILL PIPE WITH PIPE WRENCHES. ONE DRILLER SLIPPED STRIKING THE CONTROLS FOR ROTATION. PIPE ROTATED DRIVING PIPE WRENCH INTO INJURED ABDOMEN. SURGERY REQUIRED TO REPAIR DAMAGED MUSCLE TISSUE

WHILE JACKING UP ROD TRAILER, THE TIMBER UNDERNEATH THE BOTTLE JACK DETERIORATED CAUSING THE TRAILER HITCH TO LAND ON EE'S HAND.

Loading grinder bucket propped the door open with a pry bar- hit the pry bar which fell and struck his left pinky causing a fracture.

Using a ratchet to tighten a bolt on a 10" hugger ee felt a pop in his neck.

WAS BREAKING A CORE SAMPLE WHEN EE STRUCK LEFT INDEX FINGER WITH A ROCK HAMMER CAUSING A FRACTURE OF THE FINGER. EE WAS SEEN BY A PHYSICIAN AND PLACED ON LIGHT DUTY.

PICKING ROCKS WITH A PICK, PICK REBOUNDED OFF A ROCK. HE LOST GRIP WITH HIS RIGHT HAND. THE PICK FLEW OVER HIS LEFT SHOULDER, HYPEREXTENDING THE SHOULDER.

EE WAS SWINGING A 2 LB HAMMER TO GET A FITTING OUT OF A HOSE. THE HAMMER MISSED THE FITTING AND LEFT PINKIE FINGER HIT THE FITTING. RESULT WAS A LACERATED LEFT PINKIE FINGER THAT REQUIRED SUTU RES.

EE WAS SCREWING A BIT INTO THE HAMMER ASSEMBLY WHEN HE TURNED THE BIT THE WRONG WAY AND IT CAME DOWN AND PINCHED HIS LEFT PINKY FINGER.

WHILE REMOVING THE LATCH HEAD THE WRENCH SLIPPED LANDING BETWEEN THE DRILL ROD AND HIS LEFT INDEX FINGER.

WHILE EE WAS CHANGING THE TEETH ON A LOADER, HE OVERSTRESSED HIS LEFT ELBOW WHILE HAMMERING.

EE WAS USING A SLEDGE HAMMER TO REMOVE BUCKET TEETH. IN THE PROCESS OF STRIKING THE TOOTH A PIECE OF METAL HIT HIS LEFT LEG.

WHEN HAND WRENCH WAS BEING REMOVED EE PINCHED HAND BETWEEN WRENCH AND DERRICK. 1" LACERATION ON OUTSIDE OF RIGHT HAND REQUIRED 3 STITCHES. EE RETURNED TO WORK DURING THE SHIFT.

EE WAS PRYING ON MOTOR TERMINATION BOX WHEN BAR SLIPPED. HE FELL TO THE RIGHT SIDE, BANGING HIS RIGHT SHIN & TWISTED HIS BODY, STRAINING HIS LOWER BACK.

WHILE USING A HAMMER TO STRAIGHTEN AN OIL GAUGE THE EMPLOYEE STRUCK THE VISE WITH THE HAMMER CAUSING A PIECE OF METAL TO STRIKE HIM IN THE LEFT HAND.

EE STRUCK THE LOADER TOOTH WITH A HAMMER AND A PIECE OF METAL HIT HIM IN THE KNEE.

WHILE CUTTING A PIECE OF RUBBER HOSE WITH A UTILITY KNIFE, CUT HOSE ALSO CUTTING LEFT THUMB.

WHILE DRIVING A PIN INTO APRON FEEDER CHAIN LINK A PIECE OF THE PIN BROKE OFF.

EMPLOYEE PULLED THE PIN ON THE JACK STAND, AND WHEN IT RAISED IT CAUGHT THE EMPLOYEE'S LEFT THUMB RESULTING IN A FRACTURE. NOTE: JACK STAND IS SPRING LOADED.

EE WAS CUTTING ROCK CORE SAMPLES WHEN YHE MADE CONTACT WI6TH THE SAW BLADE WITH HIS RIGHT INDEX FINGER. SUTURES WERE REQUIRED T6O CLOSE WOUND.

EMPL0YEE WAS DRIVING TRACK PIN WITH A HAMMER. A SHARD OF METAL BROKE OFF FROM THE PIN STRIKING HIS LEFT UPPER LEG CAUSING A 1 CM LACERATION. TWOSUTURES WERE REQUIRED FOR REPAIR OF LACERATION. EMPLOYEE RETURNED TO WORK FULL DUTY.

EMPLOYEE WAS ATTEMPTING TO LOOSEN A BOLT WITH A RATCHET AND A CHEATER PIPE. THE SOCKET BROKE AND THE EMPLOYEE WAS LACERATED BY THE SHARP EDGE OF THE PIPE. THE EMPLOYEE RECEIVED 9 SUTURES TO RE PAIR THE LACERATION AND WAS PLACED ON LIGHT DUTYFOR TWO DAYS.

EE WAS PULLING A PIN FROM A SHOVEL TRACK USING A COMEALONG. THE COMEALONG WAS ATTACHED TO THE PIN VIA A CHAIN CONNECTED TO AN EYEBOLT, SCREWED INTO A NUT WELDED TO THE PIN. THE WELD BNROKE AND THE CHAIN SNAPPED BACK, STRIKING THE EE IN THE FOREHEAD, CAUSING A LACERATION. NO STITCHES BUT THE EE WAS GIVEN TWO DAYS LIGHT DUTY.

EE TURNED TOWARDS THE DRILL RIG, THE GEOLOGIST HIT A COUPLING WITH A HAMMER AND A CHIP OF PVC HIT EE IN LIP.

EE WAS USING A 16# SLEDGE & PUNCH TO DRIVE A BUCKET PIN OUT WHEN HE MISSED WITH SLEDGE PINCHING HIS FINGER BETWEEN THE HAMMER HANDLE & PUNCH HEAD

EE WAS STANDING ON A LADDER WHILE PULLING ON A PRY BAR. THE BAR SLIPPED AND EE FELL TO THE GROUND LANDING ON HIS BUTT.

WHILE HAMMERING ON A CHISEL A PIECE OF METAL CHIPPED OFF AND STRUCK THE EMPLOYEE ON THE HAND CAUSING A MINOR LACERATION. THE INJURY SITE CONTINUED TO BE IRRITATED AND ON 8/18/98 WAS EVALUATED BY A PHYSICIAN AND A SMALL PIECE OF METAL WAS SURGICALY REMOVED. SUTURES SERE USED TO CLOSE THE WOUND.

EE WAS HAMMERING ON A LOADER BUCKET TOOTH WHEN ASPLINTER OF STEEL BROKE OFF OF THE TOOTH AND STRUCK EE'S UPPER LIP CAUSING A LACERATION WHICH REQUIRED 2 SUTURES TO CLOSE.

THE INJURY OCCURRED WHILE THE EE WAS REMOVING INSULATION FROM A HI VOLTAGE. IN ORDER TO DO TESTING ON CABLE THE EE WAS USING KNIFE TOWARDS HIS BODY INSTEAD OF AWAY FROM HIS BODY. THE KNIF E OFF THE WIRE INSULATION & CUT HIS LEFT FOREARMON THE BOTTOM PART.

THE EE WAS STRIPPING TECK CABLE WITH A RAZOR KNIFE. HE WAS STRIPPING TOWARDS HIS LEFT HAND WHEN THE KNIFE SLIPPED, CUTTING THE LITTLE FINGER ON THE LEFT HAND.

ANOTHER HELPER WAS ATTEMPTING TO POSITION TONGS AND SHOVED THEM. THIS CAUSED INJURED EMPLOYE'S LEFT PINKY AND RING FINGER TO GET SMASHED BETWEEN TONGS AND CONTROL PANEL.

EE WAS TRYING TO REMOVE A RADIATOR HOSE BY HOLDING ONTO THE HOSE WITH HIS RT HAND AND PRYING WITH A SCREWDRIVER IN HIS LEFT HAND. HIS LEFT HAND SLIPPED AND THE SCREWDRIVER PENETRATED HIS RT HA ND.

EE WAS CHANGING OUT A LOADER TOOTH WHEN HE STRUCK THE TOOTH WITH A HAMMER A SMALL FRAGMENT OF STEEL BROKE OFF THE TOOTH AND STRUCK HIS LEFT KNEE CAUSING A LACERATION WHICH REQUIRED 3 SUTURES T O CLOSE.

EMPLOYEE WAS PRYING CYCLONE SAMPLER AWAY FROM THE RIG & A PRY BAR SLIPPED OUT OF ANOTHERE EMPLOYEE'S HAND & HIS INJURED IN THE UPPER LIP.

TRIPPING OUT OF HOLE, HELPER THREW ROD BACK AND DRILLER LIFTED ON THE ROD WITH WINCH LINE CLEAR RODS ON THE TRUCK. WHILE LIFTING ROD IT HIT TOP HEAD AND SWUNG OUT AND HIT JARRED HIM IN THEFACE AND HIT HIS CHEEK.

EMPLOYEE WAS SHARPENING A ROCK SAW BLADE USING ASHARPENING STONE. HIS LEFT THUMB CONTACTED THE SAW BLADE CAUSING A LACERATION TO HIS LEFT HAND/THUMB WHICH REQUIRED SUTURES TO CLOSE.

EMPLOYEE WAS ATTEMPTING TO MOVE A MILL LINER USING A PRY BAR. THE PRY BAR SLIPPED CAUSING VICTIM TO FALL BACKWARD ONTO THE MILL FLOOR. AS A RESULT OF THE FALL, EMPLOYEE SUSTAINED A SEVERE STRA IN TO HIS RIGHT KNEE.

EMPLOYEE WAS PULLING ON TORQUE WRENCH WHEN HE FELT A PAIN IN HIS RIGHT WRIST. EMPLOYEE DID NOTSEE A DR. UNTIL 1-25-93. DOCTOR DIAGNOSIS WAS A BONE CHIP IN WRIST AREA.

WHILE CUTTING RUBBER HOSE WITH A POCKET KNIFE, EE CUT HIS LEG.

EE WAS CUTTING A PIECE OF RUBBER WITH HIS POCKET KNIFE WHEN THE BLADE FOLDED UP, CUTTING HIS FINGER.

EMPLOYEE WAS ATTEMPTING TO SHARPEN THE BLADE ON A ROCK SAW WHEN HIS LEFT THUMB CAME IN CONTACT WITH THE BLADE RESULTING IN A LACERATION TO HIS LEFT THUMB WHICH REQUIRED 5 SUTURES TO CLOSE.

EMPLOYEE WAS USING A PIECE OF PIPE TO HAMMER A PLASTIC AIRLINE (LOW PRESSURE). HE STRUCK HIMSELF WITH THE PIECE OF PIPE.

EMPL WAS HOLDING METAL PUNCH WHILE ANOTHER EMPL WAS STRIKING IT IN ATTEMPT TO REMOVE PIN. WHEN PIN CAME OUT TOOL BAR ON D8 CAT ROLLED & CAUGHT RIGHT MIDDLE FINGER BETWEEN TOOL BAR & PUNCH. IN JURED EMPL RECEIVED LACERATED FRACTURE OF RIGHT MIDDLE FINGER. HE WILL LOSE TIME FROM WORK AS RESULT OF THIS INJURY.

EMPL WAS USING PRY BAR TO REMOVE ROCKS FROM PLUGGED ORE CHUTE WHEN HE STRAINED BACK.

REMOVING BEARING WITH HEEL BAR BAR SLIPPED CUT FINGER ON PC OF METAL

WAS REMOVING A RUSTY SCREW FROM A FLORESCENT LIGHT FIXTURE WHEN THE SCREW DRIVER SLIPPED & H IT HIS LEFT HAND

A FELLOW EMPLOYEE WAS POUNDING ON A PIPE WHENNTHE INJURED TOLD HIM TO HOLD UP AND HE TOOK HOLD OF THE PIPE WHERE HE WAS POUNDING,THE EMPLOYEE SAID HE HAD NOT HEARD HIM SAY TO HOLD UP.

HE WAS INSTALLING COOLER ON C RUSHER SHACK & HADPUNCH OUT HE HIT HIS LEFT MIDDLE KNUCKLE ON ONE OF CLIPS THAT HOLD COOLER PADS.

PUNCHING A H OLE IN A REACTIVATOR WITH A HAMMER & PUNCH HE HAD THE FOREIGN BODY REMOVED ON 012888

WAS WORKING ON A TRANSMISSION, WHEN HIS WRENCH SLIPPED OFF THE NUT AND CUT THE BACK OF HIS RIGHT HAND ON A SHARP EDGE OF THE CASTING.