Buscar en el registro

EMPLOYEE WAS MOPING THE FLOOR & STRAINED HIS LOWER BACK.

INJURED STRAINED HIS BACK WHILE TRYING TO LOOSENWET COAL BUILDUP IN 9 KILN COAL BIN HOPPER NY SWINGING A HAMMER AND USING A 6 FT LONG BAR. INJURED WAS STRIKING THE OUTSIDE OF THE BIN HOPPER.

EE WAS PRYING THE LINER WITH A PRY BAR WHEN THE BAR SLIPPED AND EE FELL OVER HIS LT. ANKLE, CAUSING A BREAK TO HIS LT. LEG (FIBULA). NO EQUIPMENT DAMAGE.

INJUURE WAS PRYING A ROLLER OUT OF A ROLLER CONVEYOR. WHEN ROLLER CAME FREE THE PRYBAR PINCHED HIS FINGER AGAINST THE CONVEYOR.

INJURED WAS HITTING A DUST COLLECTOR PIPE WITH A BAR WHEN HE FELT A PAIN IN HIS SHOULDER.

EMPLOYEE WAS REPAIRING ROLLER FROM A COAL MILL. THE ROLLER TURNED, PINCHING HIS THUMB BETWEEN THE ROLLER AND A CHAIN JACK.

INJURED WAS REPAIRING A BUCKET ELEVATOR. HE WAS PULLING UP ON A CHAIN JACK AND EXPERIENCED BACK PAIN. WORKED UNTIL HE WENT TO DR. ON 12-1-97 LIGHT DUTY FOR 5 DAYS.

INJURED WAS HOLDING A 1" HOSE THAT ANOTHER EMPLOYEE WAS CUTTING WITH A KNIFE. THE KNIFE SLIPPED CUTTING HIS THUMB. THE CUT REQUIRED 4 STITCHES.

CLEANING MATERIAL OFF OF ROOF USING 35 LB BUSTEREE EXPERIENCED LOW BACK AND LEG PAIN. NOT REPORTED UNTIL 4/23/97. REOCCURANCE OF BACK PAIN EXPERIENCED IN 1989 & 1992

EE WAS INSTALLING AN ELBOW ON A COAL GRIDNING MILL. THE ELBOW AS BEING HELD WITH A CABLE FROM A SMALL CRANE. WHILE TIGHTENING THE COUPLING THE ELBOW SLIPPED & TURNED STRIKING EE

INJURED WAS PULLING ON AN ADJUSTABLE WRENCH WHEN IT SLIPPED OFF BOLT AND HAND STRUCK CONVEYOR FRAME.

INJURED WAS TIGHTENING BOLTS ON A COAL GRINDING MILL WHEN HE FELT A PAIN IN HIS BACK. STARTED LOSING TIME ON 11/1/96.

DIGGING LUMPS OUT OF CEMENTSILO WITH A BAR WHEN HE FELT BACK PAIN.

PULLING ON A WRENCH. WRENCH JERKED. INJURED STRAINED BACK. PREVIOUS BACK PROBLEMS WENT TO DR. ON 9-22-95 PLACED ON LIGHT DUTY.

INJURED WAS REMOVING SCREW CONVEYOR COVER ON BAGHOUSE SCREW DUST BLEW INTO RIGHT EYE

PUSHING LARGE PIECES OF CLINKER IN COOLER WITH A BAR. BAR SLIPPED AND INJURED STRUCK SIDE OF COOLER WITH RT HAND. WENT TO DR ON 7-15-95. G GESS ADVISED 7-27-95.

EMPLOYEE WAS TIGHTENING A BELT TO SPLICE IT AND FELT PAIN IN HIS LOWER BACK. EMPLOYEE WORKED UNTIL 12-7-94 WENT OFF WITH NO PHONE-DETAILS NOT OBTAINED UNTIL 1-16-95.

EE PULLED ON GATE OF 83 SILO WITH BAR AND REINJURED HIS BACK. RECCURANCE OF BACK INJURY FROM 1-22-92.

EMPLOYEE WAS REPLACING LINE PLATE AND MOVING A PUMP AT WEST TUNNEL. HIS WRENCH SLIPPED AND HE FELL AGAINST THE SILO BRUISING HIS LEFT ARM.

EE WAS UNCHOKING A SAND AND IRON ELEVATOR CHUTE. HE WAS USING A BAR AND PULLED HIS HAND INTO THE ELEVATOR.

EE WAS USING SHOVEL ON 9 DRAG WAS IN WET CLINKER AND BURNED HIS KNEES AND LOWER LEGS.

EMPLOYEE WAS TRYING TO GET A BAG FROM RAMBAR/RAMBAR CAME BACK AND PINCHED HIS FINGER. 4 BUTTERFLY CLOSURES.

EE WAS USING A BAR TO MOVE A PUMP. BAR SLIPPED AND EE FELT PAIN IN HIS BACK. BECAME A DR CASED ON 9-10-93 WITH LIGHT DUTY.

EMPLOYEE WAS CUTTING AN ARLON HOSE FOR #10 FINISH KNIFE & CUT HIS LEFT THUMB BECAME AWARE OF STICHES (4) ON 08-27-93

EMPLOYEE WAS OPENING VALVE TO FILL WATER TRUCK. WHILE PULLING ON BAR, VALVE OPENED AND MASHED HIS LEFT THUMB.

EMPLOYEE WAS REMOVING GRATE BARS WHEN ONE BAR SLIPPED AND CAUGHT EMPLOYEE'S RIGHT THUMB.

EMPLOYEE WAS KNOCKING BALLS OUT OF GRATES IN THE #10 DRY MILL EMPLOYEE STEPPED OFF A BOARD INTO HOT CEMENT. CEMENT GOT INTO EMPLOYEES BOOT.

REACHING IN A BOX TO CUT TWINE THAT HELD ROPE IN PLACE & CUT RIGHT THUMB W /KNIFE EE RECEIVED 4 STITCHES AT HOSPITAL

54736YEE WAS HITTING ONA DUST COLLECTOR PIPE AND STRUCK HIS EHAD ON ANOTHER PIPE AND JAMMED HIS NECK. I WAS INFORMED THAT INJURED BEGAN TAKING PHYISCAL THERAPY ON 8-7-92. I BECAME AWARE OF T 85039EATMENT ON 8-10-92.

EMPLOYEE WAS POSITIONING A CEMENT PUMP AND INJURED HIS LOWER BACK.

WHILE USING PIPE FOR LEVERAGE BLOCK PIPE WAS RESTING ON SLIPPED & FELL ON EMPL'S FOOT. EMPL SUFFERED 2 BROKEN BONES IN FOOT.

WHILE BEATING ON AIRLSIDE AT PUMP DUST CAME OUT OR OFF TOP OF AIRLSIDE AND GOT INTO LEFT EYE.

EMPLOYEE OPENED A METAL LID W/A SHOVEL SHOVEL WAS STRUCK BY LID & SHOVEL HANDLE PENETRATED EMPLOYEES RT CHEEK

CLEANING OUT D/C PIPE;DIRT FELL IN RIGHT EYE.

INSTALLING A COUPLE HAMMER IN CRUSHER & MOTOR T8URNED & INJURED TOOK A 3/4 TON CHAIN JACK HOOKED IT TO MOTOR & OPEN CRUSHER AS THE MOTOR TURNED BACK THE DOOR ALSO CLOSED STRICKING INJURED AS H E DIDNT SEE THE DOOR COMING CLOSED BEHIND HIM

WHILE KEEPING TENSION ON THE CHAIN JACK, HOOK LET LOOSE AND CAME BACK HITTING MIDDLE FINGER ON LEFT HAND.

27" DUCT SUPPORTED FROM RATCHET-TYPE COME-ALONG IN LOCATION TO BE INSTALLED.OTHER EMPL RAISED DUCT VIA HOIST.IT SWUNG LATERALLY INTO POSITION,TRAPPING I.NAME FINGER BETWEEN FLANGE AND VERTICAL STRUCTURAL ANGLE.

MATERIAL FELL INSIDE HOPPER & WEIGHT OF MATERIAL CAUGHT L THUMB BETWEEN DOOR & BAR.

EMPLOYEE WAS PLACING JACKS UNDER MILL, RAISED HIS HEAD AND JAMMED HIS NECK ON LOW OVERHEAD.

CUTTING A PIECE OF SKIRTING OFF A CONVEYOR BELT WHILE PULLING THE END THE BOLTING CAME LOOSE AND THE KNIFE USE TO CUT THE RUBBER BELTLINE CUT THE PALM OF LEFT HAND. 6 STITCHES.

EMPLOYEE WAS SW3NGING SLEDGE HAMMER AND THE HAMMER SNAGGED ON SAFETY BELT LANYARD MISDIRECTING SEING AND STRIKING LEFT KNEE A GLANCING BLOW.

WHILE UNBOLTING3THE BIN BOTTOM THE BOTTOM CAME LOOSE AND HOT DUST FLOWED OUT AND MAN JUMPED INTO HOT DUST TO ESCAPE AND DUST BURNED ANKLES ABOVE BOOT HEIGHT LOST TIME ON 7-31-87 TO HAVE A SKIN GRAFT TO SMALL3PLACE ON RT ANKLE

SWINGING SLEDGE3HAMMER TO STRIKE SIDE OF BIN TO DISLODGE MATERIAL TO FEED ONTO BELT.

MILL LINER SLIPPED WHILE USING A PINCH BAR, STRIKING THUMB.

WHILE TAKING NUTS OFF BOLTS WITH WRENCH & WORKING CLOSELY WITH OTHER EE WRENCH OF OTHER EE SLIPPED AFTER A NUT BROKE LOOSE & STRUCK INJUREDS FINGER AGAINST THE NUT.

TWISTED BACK WHILE USING A 20 STRIKING HAMMER TO KNOCK METAL GRATES OUT OF MILL.

PULLING ON WRENCH LOOSENING BOLT.