Buscar en el registro

Struck by/against fixed structure that gave way to a tensioned come-along. Employee was struck in lower back, causing bruising and pain in the area. The injury was at a tolerable level and could be managed with home care. No other persons/equipment effected

Employee crawled into a triple deck incline screen to change the poly deck screens. Employee was using a 2lb hammer to adjust the screen when the hammer bounced back hitting EE above EE's right eye.

Employee was using ratchet wrench to tighten chute lock chamber when socket slipped from nut causing the ratchet handle to hit employee in the mouth cracking a front tooth.

Employee was installing a new leaf spring with an adjustable wrench. The wrench slipped and his hand hit the truck

Employee was trying to clear a rock that was stuck in the jaw. He was using a wedge attached to a chain, standing on the platform above the jaw. The wedge bounced up and as it fell he was holding onto the chain and the weight pulled his shoulder.

WHILE POUNDING MIXER CHUTE INJURED HIT HIS RIGHT INDEX FINGER WITH A SLEDGE HAMMER. HE BRUISED & CUT HIS FINGER.

WHILE EE WAS POUNDING IN LOCKING PINS, LOCK PIN CHIPPED. EE WAS FIXING A 992 TIRE.

WHILE PULLING WRENCH TO FIX A GATE EMPLOYEE SPRAINED LOWER RIGHT BACK. THIS IS A RECURRENCE OF HIS BACK CONDITION 5-10-96. THIS HAD NOT BEEN FILED ON 4-1-00 BECAUSE AT THE TIME IT WAS NOT REPO RTABLE.

WHILE USING A HAMMER TO REMOVE A SCREW PIN, EE STRUCK HIS LEFT HAND WITH THE HAMMER.

DURING CLEANUP OF MATERIAL SPILLAGE USING BUSTER& SHOVEL, EE STRAINED HIS LOWER BACK.

USING WRENCH TO BREAK FREE A BOLT AND HIT LEFT HAND MIDDLE FINGER. DAMAGE TO FINGER.

PULLING ON PROBLE AND FELT PAIN IN STOMACH.

EMPLOYEE WAS CLEARING MATERIAL BUILDUP AT THE RISER DUCT DOOR WITH A METAL BAR WHEN THE HEATED MATERIAL ENTERED EMPLOYEE'S GLOVED, LEFT HAND.

EE WAS TRYING TO UNPLUG SILO #6 WITH A HAMMER & STAINED HER RIGHT SHOULDER.

EMPLOYEE WAS KNOCKING DOWN HANGUP OF TIRE CHIPS WITH POKE BARS ON OPPOSITE SIDE WHEN POLE FELL INTO THE HOLLOWED OUT POSITION OF THE PILE JERKING EMPLOYEE FORWARD. EMPLOYEE SUFFERED HERNIATED DISK IN BACK.

EMPLOYEE WAS REMOVING BRAKE LINE AND BRAKE CHAMBERS FOR REPLACEMENT WHEN HE SUFFERED LEFT CHEST CONTUSION.

EE WAS SECURING "DOG BONE" WITH ROPE WHEN THE ROPE PULLED AGAINST HIS HAND AND CAUSED INJURY TO HIS RIGHT, 5TH FINGER.

EMPLOYEE WAS USING A HAMMER & A FLATBAR TO UMPLUG CEMENT ON SLOTTED DIVISION HEAD SCREEN WHEN A METAL CHIP FROM DIVISION HEAD ENTERED HER RT BICEP

WHILE EE WAS POUNDING ON THE DRIFT PUNCH TO REMOVE A DRIVE PIN FROM THE BEARING SHAFT FRAGMENT FROM THE DRIFT PUNCH LACERATED HIS LEFT FOREARM.

WHILE ATTEMPTING TO REMOVE A PIN FROM THE FINISH SILO'S SCREW, EMPLOYEE HAMMERED HIS LEFT THUMB.

WHILE POUNDING ON THE DOOR WITH A SLEDGE HAMMER, THE DOOR FELL AND "PULLED OUT" EMPLOYEE'S RIGHTSHOULDER.

EMPLOYEE ATEMP TED TO FREE BINDICATOR WITH A GALVANIZED PIPE FROM GROUND LEVEL BY TRYING TO LOOSEN MATERIAL ON THE CHUTE SPRAINED LOWER BACK

WHILE CUTTING A HOLE IN A BELT WITH A UTILITY KNIFE EMPLOYEE LACERATED HIS LEFT THUMB

WHILE HOISTING MATERIAL WITH ROPE EMPLOYEE INJURED LEFT SHOULDER.

EE USED A ROPE TO LOWER HIS TOOLS AND SPRAINED HIS RIGHT SHOULDER.

BUSTER BLADE GOT CAUGHT IN ELEVATOR WHILE CLEANING OVERHEAD CHUTE CAUSING BUSTER TO COME UP. CUT RIGHT SIDE OF FACE.

DURING ROTATION OF THE SHAFT BETWEEN THE MOTOR AND TEH REDUTCTION GEAR BOX WITHA PIPE WRENCH, IT CAUSED THE SHAFT TO ROTATE WITH SUCH FORCE THAT THE EMPLOYEE IMMEDIATELY LET GO OF THE PIPE WR ENCH. IT WAS THEN THAT EMPLOYEE'S LEFT HAND, BABY FINGER GOT CAUGHT BETWEEN THE END OF THE PIPE WRENCH HANDLE AND BASE PLATE. BABY FINGER FRACTURED AND LACERATED.

POUNDING SILO TO TAKE OUT GYPSUM.FELT PAIN IN BACK.

USING BUSTER TO KNOCK DOWN MATERIAL. STRAINED BACK.

BREAKING MATERIAL WITH SLEDGE HAMMER AND AIR LANCE.PAIN IN LOWER BACK.

USING HAMMER TO OPEN COVER ON COAL MILL FAN & HIT LEFT THUMB.

PAINTING OF OUTSIDE ADMIN BLDG.

USING BAR TO PRY ROLLER IN COAL MILL. ROLLER SHIFTED & ROLLER PUSHED ON BAR & INJ WRIST.

SWINGING A 16 LB SLEDGE HAMMER, TO TIGHTEN PRIMARY CRUSHER MOTOR BOLT.

POKING PREHEATER TO CLEAR OBSTRUCTION. HOT DUST BLEW OUT.

PULLING BUCKET UP WITH ROPE. STRAINED LEFT SHOULDER.

SQUATTING DOWN AND USING SLEDGEHAMMER. PAIN IN LOWER BACK.

WRENCH SLIPPED WHILE SERVICING EQUIPMENT.

SWINGING SLEDGE HAMMER AND STRAINED SHOULDER AND LOWER BACK.

CUTTING RUBBER BELTING AND CUT R KNEE

USING CRIMPING TOOL. NO LOST TIME UNTIL 5/16/88. WENT FOR ARTHROSCOPIC SURGERY.

HIT THUMB WITH HAMMER

USING SLEDGE HA4MER TO POUND CHUTES. NEXT DAY FELT KNUMBNESS IN FINGER.