Buscar en el registro

employee cut knuckle with utility knife

Employee was cutting the rubber on a screen

Pry bar fell and pushed EE's hand against the chute

Employee was using utility knife to cut fitting off of hose when cut palm of hand.

A frozen chunk had plugged up a conveyor on the crusher. The employee used a pinch bar in an attempt to reposition the chunk. The hook at the end of the pinch bar slipped off of the frozen chunk which caused the straight end of the bar to hit the employee in the mouth, chipping two teeth.

EE was cutting a piece of hose with a utility knife when he cut his gloved thumb. Three stitches were needed.

Employee was changing screens using hand tools, ratchet and socket.

Employee was in an awkward position, twisting and reaching between tires of portable screen plant to remove guard with a wrench in order to adjust belt tracking. He suffered a lumbar strain from this activity.

Sunny, mid 60's, EE was cutting a 5/5" belt, right hand holding a straight edge and left hand using a utility knife. The knife slipped, cutting the top side of the right hand which required 2 stitches to close. No medications or restrictions given and EE returned back to work that day.

Employee & supervisor were attempting to remove nipple of water valve on water truck. Employee using a pipe wrench on nipple while supervisor was heating 3" 90% cast iron pipe elbow. The wrench slipped and employee fell backwards while twisting to break fall. Twisting of left lower leg resulting in fracture. The ground was level with no slip/trip/fall hazards present.

Employee was using a rachet extension to drive wedges out of screen rails and a piece of steel chipped off and struck employee in the neck creating a puncture wound.

Employee was removing jack from under equipment when it shot out and struck forearm

EMPLOYEE WAS PRYING SCREEN WITH CROWS FOOT WHEN FOOT SLIPPED AND HIT HIM IN THE HEAD.

REMOVING/REPLACING DAMAGED MANTLE FROM TELSMITH SILVER BULLET CONE CRUSHER. TAPERED HEAD & SHAFT REMOVED FROM CRUSHER, POSITIONED ON BLOCKING (ATOP OF SAW HORSES). DISTANCE FROM GROUND 3-4 FT. EE TOLD TO CUT BURNING RING & WAIT FOR HELP. EE W/O HELP, LOOSENED NONSTABLIZED SHAFT NUT W/SLEDGE HAMMER. DIDN'T REALIZE HOW LOOSE NUT WAS, SHAFT NUT & WRENCH FELL OFF SHAFT HEAD (100-150 LB

WHILE REACHING IN DESK, A THUMB TACK STRUCK HIS FINGER CAUSING HIM TO PULL BACK, PUNCTURING HIS LEFT THUMB WITH A KNIFE THAT WAS IN HIS RIGHT HAND.

WHILE CHANGING THE TEETH ON THE 980 LOADER BUCKET, THE HAMMER BEING USED SLIPPED AND HIT THE EE'S FINGER.

WHILE TRYING TO BREAK A FLAT ROCK UNDER THE JAW WITH A HAMMER, EE'S FINGER HIT THE TENSION ARM OF THE CRUSHER.

WHILE USING CRANE TO FIX WASH PLANT ON CRUSHER THE CRANE SLING GOT CAUGHT BETWEEN 2 PIECES OF SAND SCREW & CAME LOOSE HITTING HIS HAND

WHILE EE WAS USING CHIPPING HAMMER TO CHANGE SCREENS, THE HAMMER SLIPPED HITTING HIS TOOTH.

WHILE EE WAS CUTTING A PIECE OF RUBBER UNDER THE1700 CONE CRUSHER USING A UTILITY KNIFE, THE KNIFE SLIPPED AND PUNCTURED HIS LEFT FOREARM.

WHILE EE WAS USING A WRENCH TO ADJUST A BOLT ON THE CRUSHER HEAD, THE WRENCH SLIPPED OFF CAUSING THE EE TO LOSE HIS FOOTING AND HE FELL UP AGAINST A STEEL PLATE WHICH LACERATED HIS RIGHT THIGH AND BUTTOCKS.

WHILE EE WAS CUTTING A ROLL 0F 1/2"-4" FLASHING RUBBER, HIS POCKET KNIFE SLIPPED AND CUT HIS LEFT THIGH.

WHILE WASHING HOPPER WITH HOSE BACK SPLASH OF WATER WITH RUST PARTICLE WENT INTO EYE.

EMPLOYEE WAS JACKING A PIECE OF STEEL BACK INTO PLACE WHEN THE RATCHET SLIPPED, HITTING HIM IN THE LOWER LIP.

54736YEE WAS REPLACING A TOOTH ON THE BUCKET LOADER WHEN A CHIP OF METAL HIT HIS ARM.

CUTTING BELT SHEET ROCK KNIFE

EMPLOYEE WAS REMOVING THE BAGHOUSE AT THE CRUSHING SITE AS HE REMOVED THE BOLTS FROM IT THE DUCKWORK SHIFTED & FELL ON HIS HEAD

EMPLOYEE WAS ATTEMPTING TO REMOVE A ROCK FROM THE FEEDER,TO ALLOW A LARGER ONE TO BE FREED UP.

EMPLOYEE WAS HAMMERING A WEDGE ON THE SCREEN WHEN A PIECE OF METAL HIT HIM IN THE RIGHT EYE.

A ROCK WAS STUCK IN COV #5 TAIL PULLY I NAME (COWORKER) & I NAME WERE REMOVING IT WHEN I NAME SWUNG THE HAMMER & HIT I NAME RT THUMB

EMPLOYEE WAS PRYING A ROCK OUT OF A FEEDER WHEN THE BAR SLIPPED AND HIT HIS NIDDLE FINGER BETWEEN THE BAR AND THE HOPPER.

EMPLOYEE WAS TAKING BOLTS OFF TO REPAIR GATE, RAM SLIPPED AND SMASHED FOREFINGER ON LEFT HAND.