Buscar en el registro

STRIKING THE FRAME OF THE CONVEYOR TO DISLODGE SOME MUD HIS LEFT MIDDLE FINGER GOT PINCHED BETWEEN THE HAMMER HANDLE AND THE FRAME.

EE PLACED A COMEALONG OVER A BEAM AS HE DID THE HOOK CAME AROUND & HIT HIS HARD HAT CAUSING A LACERATION TO HIS FOREHEAD

BREAKING ORE AWAY FROM A CHUTE WITH A BAR. THE ORE GAVE WAY, PUSHING THE BAR AND PINCHED HIS THUMB.

A MAINTENANCE TECHNICIAN WAS TIGHTENING A PULL DOWN CABLE ON THE #101 DRILL. WHEN THE WRENCH SLIPPED AND CAUGHT HIS LEFT RING FINGER BETWEEN THE CABLE EYE AND WRENCH, CAUSING A FRACTURE.

A MAINTENANCE TECHNICIAN WAS USING A RAZOR KNIFE TO STRIP INSULATION OFF OF A WIRE HARNESS ON THE LEFT REAR STRUT SENSOR ON THE #313 HAUL TRUCK AND CUT HIS LEFT HAND, WHICH REQUIRED SUTURES.

A MAINTENANCE TECHNICIAN WAS CUTTING A PIECE OF POLYETHYLENE WITH A RAZOR KNIFE WHEN IT SLIPPED CUTTING HIS RIGHT LEG ABOVE THE KNEE CAUSING A LACERATION REQUIRING SUTURES.

WHILE REMOVING A BOLT FROM A FAN HOUSING A MAINTENANCE TECHNICIAN STRUCK HIS FACE ONTHE FAN HOUSING WHEN THE WRENCH SLIPPED OFF OF THE BOLT. THIS CAUSED SOME SLIGHT CHIPPING OF TWO CAPS ON HIS FRONT TEETH. STILL INVESTIGATING TO ENSURE CAUSE OD CHIPPED CAPS. NO CUTS OR BLEEDING OCCURRED.

EE WAS CUTTING UNEVERED RUBBER AND WAS HOLDING A STRAIGHT EDGE WITH HIS LEFT HAND AND CUTTING WITH A OLFAL RAZOR KNIFE IN HIS RIGHT HAND WHEN HE LACERATED HIS LEFT THUMB WITH THE KNIFE.

AN OPERATOR WAS CUTTING A PIECE OF URETHANE WHEN THE RAZOR KNIFE HE WAS USING SLIPPED AND STRUCK HIS LEFT LEG, CAUSING A LACERATION, WHICH REQUIRED SEVEN SUTURES TO CLOSE.

EE WAS CUTTING BELTING WHEN THE KNIFE EE WAS USING, SLIPPED CUTTING THROUGH WORK GLOVES AND LACERATING HIS LEFT HAND.

BIT ON 631-D SCRAPER. LOWERED BIT INTO CAN WITH LOADER. THEN USED TWO CENTERING BARS TO LOWER BIT INTO PLACE. PLACED IN CAN AND UPPER LEG TO HOLD IN PLACE. THEN IT SLIPPED. HE TRIED TO MOVE QU ICKLY TO GET OUT OF THE WAY, BUT WASN'T QUICK ENOUGH AND IT LANDED ON ANKLE.

EE WAS TRIMMING A SCRAPER ON GRASSHOPPE #16 WITH A RAZOR KNIFE. THE KNIFE SLIPPED OFF THE SCRAPER CUTTING HIS LEFT THUMB REQUIRING STITCHES.

EMPLOYEE PULLING ON WRENCH, WRENCH SLIPPED STRIKING EMPLOYEE IN FOREHEAD, LACERATING FOREHEAD.

EE WAS STRIPPING HIGH VOLTAGE CABLE WHEN KNIFE SLIPPED AND CUT THRU GLOVE INTO LEFT PALM.

LIFTING UP MUD TANKS TO SEE WARE THEM WITH A CHAIN AND BINDER, CHAIN ON MAIN LINE OT TANKS CAME LOSOE CAUSIGN HIS CHAIN TO YANK BINDER OPEN WHILE HE HAD HOLD OF IT.

CUTTING TAPE OFF WATERWAYS. ONBQ INNER TUBE KNIFE SLIPPED CUTTING LEFT HAND.

EE WAS USING A RAZOR KNIFE TO CUT THRU PLASTIC TUBING STROKE OF KNIFE WAS TOWARD HIMSELF INSTEAD OF ANGY FROM HIS BODY KNIFE WENT THRU TUBING UNEXPECTEDLY AND CUT EE S LEFT FOREARM CUT REQUIRE D SIX STITCHES.

THE EMPLOYEE WAS USING A WRENCH TO REMOVE A WIRE LOOM CLAMP FROM THE CAT 220 LOADER. THE WRENCH SLIPPED CAUSING HIM TO STRIKE HIS HAND AGAINST THE OIL SENDING UNIT WHICH CAUSED A SMALL LACERAT ION REQUIRING 3 SUTURES.

REMOVING PIN FROM BUCKET TOOTH OF LOADER PUNCH HAMMER CHIPPED OFF AND WAS EMBEDDED IN THE EMP R HAND BEHIND THE INDEX KNUCKLE A SM INCISION

EMPLOYEE WAS HELPING DRILL OPERATOR CHANGE DRILL BITS.WHILE ATTACHING HYDRAULIC RAM TO CHAIN WRENCH OPERATOR MOVED THE LEVER CONTROLLING RAM,CAUSING WRENCH TO PRESS FINGER BETWEEN DRILL STEEL AND WRENCH.INJURY LIMITED TO BRUSING OF 1ST PHALANGE R MIDDLE FINGER.

FLOOR JACK PLACE DUNDER PAN BUT WHEN IT FAILED TO BREAK LOOSE THE JACK REMVOED PAN BROKE LOOSE SWUNG DOWN INJ EMP R HAND PALM AND L FOREARM

CUTTING A PLASTIC TIE WHICH WAS HOLDING HOSE TOGETHER WHEN KNIFE PASSED BETWEEN HOSE AND CUT RIGHT HAND BETWEEN THUMB AND INDEX FINGER. HAND WAS STICHED AT COMPANY CLINIC.

EMPLOYEE WAS SHOVELING AROUND CONVEYOR WHEN HE JAMMED HIS RT WRIST AGAINST SHOVEL HANDLE SPRAINING HIS RT THUMB PRESCRIPTION MEDICATION WAS ADMINISTERED TO EMPLOYEE TO REDUCE SWELLING