Buscar en el registro

While attempting to loosen the tight drain plug using a socket and ratchet on the front wheels of a haul truck for the final drive oil the socket slipped off causing the employee to jerk backwards and lose balance. The sudden movement caused strain the lower back.

Employee was wire stripping using a Klever Kutter when the plastic edge of the tool broke causing the tool to slip and lacerate the palm of the employees left hand. Employee was taken to the Urgent Care and received 5 stitches with a return to Work as Tolerated.

Employee was tightening bolts on aa heat exchanger when the wrench slipped off the bolt causing discomfort in left shoulder

Maintenance worker was changing out a broken mirror on a haul truck when the wrench slipped off a bolt causing the left index finger to come into contact with the mirror resulting in a laceration that required 4 sutures

EE pulled down on a Chain Spreader tool handle. The handle suddenly released downward straining employee's shoulder. Employee saw a physician on 9/9 and released back to work as tolerated. On days off the employee saw an Orthopedic Physician 9/30 and was released restricted. The employee returned to next scheduled shift restricted on 10/5 making this a reportable case at that time.

Operator was cutting a piece of flat cardboard with a pocket knife, the knife did not cut all the way through in an area. The operator then pushed harder with the knife causing it to slip and cut his left hand at the base of his thumb. The operator was transported to the ER room where he received (2)two sutures.

Operator was changing GET using deadblow hammer and punch when a piece of the GET flew off and penetrated operator's left leg above the knee. The operator is scheduled to have the metal removed on 7-27-2011. The operator has not missed any work to date.

Mechanic was removing defuser from hydraulic filter with hydraulic filter still in the housing. Pulled the defuser out with pliers and the whole filter came out, pinching the middle finger between filter and housing. Mechanic received five sutures in middle finger.

Employee was digging a trench with a spade. Impact from the hard ground while digging caused pain in left shoulder.

Employee was using a vise grip, holding a punch to pound out a u-joint on a pick up truck driveshaft. Hammer glanced off of punch and hit left index finger. X-ray revealed a fractured bone.

Employee was picking up the end of a tow strap when he felt a pull in his lower back followed by slight numbness in right leg. Doctor visit revealed a pulled muscle in lower back.

Employee was cutting a piece of plastic liner with an exacto knife when his left hand. slipped causing the knife to come away from the plastic. Momentum of the hand and knife continued on cutting his right forearm. Laceration to right forearm.

Employee was hitting a loader tooth with a sledgehammer to loosen it up for removal. Small piece of steel from tooth broke off and impaled itself in employees right leg. Steel removed and leg stitched up.

EE WAS SHOVELING MATERIAL WITH HELP FROM ANOTHER PERSON. SHOVEL TIP FROM OTHER PERSON'S SHOVEL STRUCK EE'S THUMB CAUSING A LACERATION REQUIRING 5 STITCHES.

EMPLOYEE WAS CUTTING A DRIPPER LINE WITH AN EXACTO KNIFE. LINE WAS PARTIALLY CUT AND BEGAN SPRAYING SOLUTION. EE ATTEMPTED TO FINISH CUTTING LINE WHEN HE CUT HIS LEFT INDEX FINGER. STITCHES REQUIRE TO CLOSE LACERATION.

EE WAS WORKING AT THE CRUSHER, ASSISTING VULCANIZER SPLICE ON CONVEYOR BELT. HE WAS CLAMPING TWO 2X4 PIECES OF LUMBER ONTO THE BELT. ONE OF THE BOARDS POPPED UP HITTING HIM IN THE MOUTH. LACER ATION TO LOWER LIP. ONE 1 STITCH REQUIRED.

EE WAS ATTEMPTING TO LINE UP A DRILL BIT SO A WRENCH WOULD FIT ON THE BIT. WRENCHED DROPPED DOWN ONTO BIT WHILE HIS HAND WAS STILL IN PLACE. RIGHT INDEX FINGER PINCHED. STITCHES REQUIRED FOR L ACERATION. NO FRACTURED BONES.

EE WAS CUTTING A HOSE WITH A KNIFE. KNIFE SLIPPED CUTTING HIS RIGHT INDEX FINGER 4 STITCHES REQUIRED TO CLOSE LACERATION

EE WAS CUTTING A PIECE OF BELTING WITH A BELT KNIFE. HE WAS MAKING THE CUT AND HOLDING THE PIECE OF BELT WITH HIS HAND. THE KNIFE CUT THROUGHT THE BELT AND ACROSS HIS LEFT HAND. EE RECEIVED A 3/4" LACERATION BETWEEN HIS THUMB AND FOREFINGERTHREE STITCHES REQUIRED.

EE WAS UNDERNEATH A SCREEN DECK USING A SCREWDRIVER TO PRY THE SCREEN INTO POSTITION. THE SCREWDRIVER SLIPPED AND CUT HIS LIP. REQUIRED 4 STITCHES.

EE WAS CUTTING DRIPPER LINE USING A UTILITY KNIFE WHEN EE CUT HIS ARM, REQUIRING STITCHES.

EMPLOYEE WAS WATCHING ANOTHER EMPLOYEE HAMMER A METAL PIN WITH A METAL HAMMER WHEN A SLIVER OF METAL FLEW OFF AND STRUCK THE FIRST EMPLOYEE IN THE CHEEK CAUSING A LACERATION.

ON 2-2-94 THE EE WAS HITTING A RIPPER TOOTH WITH A SLEDGE HAMMER WHEN A SLIVER FROM THE RIPPER TOOTH FLAKED OFF AND EMBDDED INTO EE KNEE NOTHING WAS DONE UNTIL 2-9-94 WHEN THE SLIVER WAS REMOV ED.

EMPLOYEE WAS ASSISTING MECHANIC ON THE DRILL. AFTER REMOVING THE SLEEVE HEADER THE CYLINDER WAS RAISED. AS THIS WAS BEING DONE THE PILLOW BLOCK FELL OFF THE CYLINDER AND STRUCK THE EMPLOYEE IN THE RIGHT KIDNEY AREA.

EMPLOYEE WAS REMOVING A SHAFT WITH A HAMMER AND PUNCH WHEN THE PUNCH SLIVERED AND EMBEDDED IN FOREHEAD.

USING TWO WRENCHES TO LOOSEN NUT ONE SLIPPED AND STRUCK EMP ON TOP LIP

EMPLOYEE WAS PRYING ON A CHUTE IN AN OVERHEAD POSITION.HE PUSHED ON RIGHT ARM AND DISLOCATED THE RIGHT SHOULDER.DISLOCATED SHOULDER POPPED BACK IN BUT PAIN WAS SUCH THAT EMPLOYEE WAS UNABLE TO CONTINUE WORKING.

HE WAS HOLDING THE BELLY PAN WHILE ANOTHER EMPLOYEE REMOVED THE BOLTS HOLDING IT. WHEN THE LAST BOLT WAS REMOVED, HE COULD NOT HOLD THE PAN AND IT HIT HIS RIGHT HAND AGAINST THE FLOOR SCRAPIN G SOME SKIN OFF THE BACK OF HIS HAND, FRACTURING A BONE AND DISLOCATING HIS MIDDLE FINGER.

EMPLOYEE WAS ATTACHING BLADES TO A POLYWELDER. THE ALLEN WRENCH HE WAS USING SLIPPED AND HIS RING FINGER ON HIS RIGHT HAND HIT THE BLADE CAUSING A 1 CM LACERATION.

EMPLOYEE WAS USING A HAMMER AND PUNCH TO PUT HOLES IN A CONVEYOR BELT.HE HIT HIS LEFT THUMB WITH THE HAMMER CAUSING A 2CM AVULSION.

EMPLOYEE WAS USING A KNIFE TO CUT THE FLASHING AT THE CONVEYOR BELT WHEN THE KNIFE SLIPPED AND EMPLOYEE CUT HIS RIGHT KNEE, REQUIRING STITCHES.

EMPLOYEE WAS CLEARING CONE CRUSHER OF FROZEN MATERIAL. PIECE OF MATERIAL BROKE LOOSE AND HIT RIGHT HAND CAUSING LACERATION OF MIDDLE FINGER.

WHILE ATTEMPTING TO UNPLUG FISHER CONE BY USING A BAR MATERIAL BROKE LOOSE BAR SLIPPED & RESULTED IN EMPLOYEES RT.FIFTH DIGIT BEING PINCHED BETWEEN T HANDLE & CONE

SUBJECT WAS CUT7ING A PIECE OF CONVEYOR BELT WITH A BELT KNIFE TO USE BELTING FOR FLASHING CUT LEFT INDEX FINGER NEEDING FOUR STITCHES

REMOVING A RIPP9R TOOTH FROM A D9 DOZER.WHILE STRIKING TOOTH WITH A HAMMER,A FRAGMENT CHIPPED OFF,IMBEDDING IN LEFT CENTER THIGH.HAD TWO STITCHES FROM THIS OCCURANCE.

REMOVING A STUC5 ROCK FROM THE JAW AT THE CRUSHER. USING JAW HOOK TO LIFT ROCK & ROCK FELL THRU JAW. JAW HOOK SWUNG BACK & HIT RIGHT KNEE KNOCKING RT LEG AGAINST THE JAW.

BARRING FROZEN 8AND OUT OF SAND TRUCK JAMMED THUMB BETWEEN BAR AND SAND TRUCK.

DISMANTLING THE3CYNANIDE CIRCULATION SYSTEM, UNBOLTING FLANGES. HE WAS IN THE SAME BENT OVER POSITION FOR QUITE AWHILE. WHEN HE STRAIGHTENED UP, HIS BACK SPASMED

EMPLOYEE WAS BARRING ROCK FROM JAW CRUSHER AND CAUGHT FINGER BETWEEN BAR & CRUSHER.