Buscar en el registro

EE was tightening a turnbuckle with a bar, as he pushed on the bar, the nut on the turnbuckle broke. EE fell forward and his hands landed on the concrete floor.

EE WAS USING A BAR TO LOOSEN A TURNBUCKLE ON GANG #3 IN THE MILL. THE BAR SLIPPED AND HE FELL. HE CONTINUED TO WORK WITHOUT RESTRICTIONS UNTIL 7/1/05 WHEN HE MISSED WORK. ON 7/5/05 I RECEIVED A FAX PUTTING HIM ON LIGHT DUTY

EE WAS HOLDING A COPING TOOL AGAINST A PIECE OF STONE WHILE CO-WORKER HIT THE COPING TOOL WITH A SLEDGE HAMMER TO SCORE THE STONE. CO-WORKER HIT THE EDGE OF THE COPING TOOL AND A SMALL PIECE O F METAL CHIPPED OFF THE SLEDGE HAMMER. THE PIECE HIT EE IN THE LEFT FOREARM AND BECAME EMBEDDED.

THE BLADES ON GANG FIVE HAD BECOME WORN OUT FOR SAWING STONE SLABS. THE EES HAD REPLACED THE BLADES AND WERE HAMMERING THE KEYS IN TO TIGHTEN THE BLADES. WHILE THEY DID THIS EE'S ELBOW STARTED TO HURT. HE CONTINUED TO WORK UNTIL 1900.

EE WAS CUTTING ON A PIECE OF PLEXIGALSS WITH A HACKSAW TO MAKE WINDOWS. AS HE DID SO HE FELT PAIN IN HIS LOWER BACK. HE CONTINUED TO WORK THE REST OF THE DAY. HE NEXT MORNING IT FELT TO PAINFU L TO WORK. THIS IS ANEXISTING INJURY.

THEY HAD PUSHED A COLUMN OF STONE OVER AND WERE PLUGGING THE COLUMN INTO BLOCKS. AS EE WAS HITTING THE PLUGS WITH A SLEDGEHAMMER THE COLUMN SPLIT. THE COLUMN MOVED A LITTLE CAUSING EE TO FALL TO HIS KNEES. HE CONTINUED TO WORK THE REST OF THE DAY BUT MISSED WORK NEXT DAY. HE LEFT EARLY THE NEXT DAY (FRIDAY) AND MISSED SATURDAY WITH A SORE KNEE.

THE SLABS ON GANG 7 FELL AGAINST THE WALL. THEY PUT CHAINS AROUND THE SLABS AND WERE USING A CHAIN HOIST TO PULL IT UP STRAIGHT AGAIN, EE WAS USING THE CHAIN HOIST WHEN A FOREIGN OBJECT WENT I NTO HIS EYE. HE CONTINUED WORKING AND DID NOT REPORT INCIDENT TO HIS FOREMAN. THE NEXT DAY HE CALLED OFF, SAID HE WAS GOING TO THE DR FOR HIS EYE.

THEY HAD JUST LAID A SLAB DOWN ON A SET OF ROLLERS USING AN OVERHEAD CRANE. INJURED AND ANOTHER EMPLOYEE EACH USED A BAR ON EACH CORNER TO LIFT HALF THE SLAB TO REMOVE THE CHAIN ATTACHED TO TH E OVERHAED CRANE. AS INJURED DID THIS HE CLAIMS TO HAVE HURT HIS BACK. HE LEFT WORK AT 9:00AM

EE WAS BEATING A METAL KEY TO TIGHTEN THE BLADES FOR CUTTING OUR STONE. HE MISSED THE KEY WITH THE HAMMER SWINGING IT INTO THE AIR. AT 8:30 PM EE SAID HIS ARM HURT AND HE LEFT WORK.

EMP HAD JUST SAWED SOME STONE ON A 48" DIAMOND SAW. WAS UNLOADING THE PIECES WITH SCISSOR CLAMPSON A CHAIN HOIST. STONE BROKE AND FELL CAUSING THE CLAMPS TO COME TOGETHER AND CRUSH EMP'S FINGE R. EMP WS NOT HOLDING CLAMPS BY THE HANDLE AS ISNORMAL.

EE PUT A LEVER ACTION LOAD BINDER ON A BHAIN TO TIGHTEN DOWN A BLOCK OF STONE ON OUR MILL GANG. AS HE LET GO OF THE HANDLE OF THE BINDER THE HANDLE CAME BACK ANDHIT HIS THUMB ON HIS LEFT HAND. ON 7-11-96 AFTERWORK HE WENT TO THE EMERGENCY ROOM WHICH SHOWED A FRACTURE.

THEY HAD JUST LOADED A BREAK WITH EXPLOSIVES AND WERE NOW TAMPING THE HOLES SHUT. EE WAS THROWING SAND IN THE HOLE AND OTHER EE WAS TAMPING THE SAND TIGHT. THIS EE HIT INJURED ON THE FINGER WI TH THE TAMPING BAR, RESULTING IN A FRACTURE.

EE WAS TO DRILL & TAP FOUR 11/2IN HOLES IN A PIECE OF METAL HE CLAMPED THE PIECE DOWN UNDER THE DRILL & PRESS MACHINE & DRILLED THE HOLES HE COULD NOTFIGURE OUTHOW TO TAP THE HOLES WITH THE MA CHINE SO HEDECIDED TO DO IT BY HAND WITH A 24IN CRESENT WRENCH & A 48IN CHEATER BAR BY DOING THIS HE REAGGRAVATED A PRESIOUS INJURY REPORTED ON 01-10-9 5 HE WORKED THEREST OF THE DAY ON MONDA

INJURED DECIDED OT HELP ANOTHER EMPLOYEE ON A SPLITTING MACHIEN IN HIS SPARTIME. THE PIECE OF STONE THEY WERE SPLITTING WAS UNLEVEL SO HE TOOK A PRY BAR AND LEVELED THE STONE. THE OTHER EMPL OYEE THEN TRIPPED THE MAHCINE TO SPLIT THE STONE AS THIS HAPPENED HT EPRYBAR JERKED U PINJURING HIS RIGHT HTUMB. WE RECOMMEDED HE GOT TO THE DR BUT HE FELT IT WAS NOT THE PAD. ON 5-9-94 DECI

20455 SHOVELING SCRAP SANDSTONE FROM THE FLOOR TO A TRANSFER CART.ONE GUTY TURNED,SHOVEL EXTENDED AND CAUGHT THE RIGHT HAND OF THE SECOND MAN,CUTTING HIS INDEX FINGER TO THE TENDON.