Buscar en el registro

The miner was cutting a piece of conveyor belt with a utility knife, slipped and cut leg

The employee was using a large hammer to remove some rusted bolts while repairing a roll crusher. He missed the bolt he was aiming at when he swung the hammer and hit the handle of the hammer on the crusher. His right index finger was injured and required stitches to close the wound.

EE WAS USING A PRY BAR TO PLACE DRAG CHAIN BACK ON PULLEY, BAR GOT JAMMED. EE WAS TRYING TO PULL BAR OUT, HANDS WERE CAUGHT BETWEEN BAR AND STEEL FRAMEWORK. THE LITTLE FINGER AND THE HAND 234 3 LACERATED. THIS INJURY TOOK SEVERAL STITCHES.

EE WAS USING A PIECE OF STEEL PIPE TO DISLODGE PLUGGED CHUTE. WHEN HEATED THE MATERIAL CAN GLOB UP & MAKE WHAT WE CALL A "LOG CLINKER". ONE OF THESE LOGS FELL ON TO PIPE, RAMMING THE PIPE INTO EE'S FACE. HE HAS LACERATED CHIN & LOWER LIP, PLUS TWO SHATTERED TEETH.

EMPLOYEE HAD BEEN PICKING RINGS OUT OF KILN ON SATURDAY'S SHIFT. SUNDAY HE WAS CLEANING PLUGGED KILN CHUTE DURING THIS TIME HE EXPERIENCED SHARP PAIN AND HAD A BULGE ON HIS RIGHT SIDE, IN THE GROIN AREA. EMPLOYEE WAS TAKEN TO CLINIC THURSDAY MORNING & DIAGNOSED WITH A HERNIA. HE IS SCHEDULED FOR SURGERY 01/09/02.

EE WAS PAINTING HANDRAIL BY BAGHOUSES. EE BROUGHT HIS RIGHT ARM BACK AND HIS RIGHT ELBOW STRUCK AN UPRIGHT PIECE OF SUPPORT PIPE CAUSING SWELLING OF THE RIGHT ARM & HAND.

HE WAS CLEANING AROUND/UNDER STAMLER WITH A PICKAND PRY BAR. MATERIAL WAS FROZEN AND WHILE APPLYING PRESSURE ON PRY BAR, EE STRAINED A MUSCLE WHICH RESULTED IN A HERNIA.

REMOVING MATERIAL FROM KILNS. MATERIAL FELL DOWN STRIKING THE METAL BAR. CAUSE BAR TO HIT EE AT THE SIDE OF FACE. BREAKING CHEEK BONE AROUND THE LEFT EYE.

REMOVING MATERIAL THAT HAD STUCK ON THE INSIDE OF THE BURNER SHELL. EE REMOVED A PIECE OF MATERIAL WHICH CAUSED ANOTHER PIECE OF MATERIAL TO FALL STRIKING THE EE AND KNOCKING HIM TO THE GROUND . PATIENT COMPLETED SHIFT. VISITED DR ON 2/14/99. CONTUSION TO LOWER BACK. MUSCLE RELAXANT MEDICATION WAS PRESCRIBED.

STRIPPING ELECTRICAL WIRE WITH A POCKET KNIFE. KNIFE SLIPPED CUTTING EE'S RT THUMB.

REMOVING OVERSIZED MATERIAL FROM KILN WITH METAL BAR. BAR SLIPPED, CAUSING EE TO FALL ON BACK.

REMOVING MATERIAL FROM KILNS. MATERIAL FELL FROM KILN STRIKING METAL BAR CAUSING BAR TO HIT EE. LACERATION INSIDE LEFT CHEEK, CONTUSION AND MUSCLE TEAR OF LEFT SHOULDER.

CLEANING MATERIAL FROM EQUIPMENT WITH METAL BAR AND HOE. THE TWISTING AND TURNING APPARENTLY AGGREVATED A PRIOR BACK INJURY.

TIGHTENNG BOLTS ON EQUIPMENT. PULLED ON WRENCH AND STRAINED BACK.

EMPLOYEE WAS REMOVING MATERIAL FROM KILNS WITH METAL BAR. MATERIAL HIT END OF BAR CAUSING IT TO STRIKE HIM IN THE FOREHEAD.

EMPLOYEE WAS TIGHTENING BOLTS WITH WRENCH.WRENCH SLIPPED OFF BOLT CAUSING EMPLOYEE TO FALL FROM CATWALK ONTO THE GROUND.FALL WAS ABOUT 10 FEET.

EMPLOYEE WAS ATTEMPTING TO REMOVE MATERIAL FROM KILNS A LARGE PIECE OF MTERIAL HIT THE BAR CAUSING IT TO STRIKE EMPLOYEE IN THE FACE

EMPLOYEE WAS PUSHING "LOGS" INTO COOLER WITH A METAL BAR. ANOTHER "LOG" HIT THE BAR CAUSING IT TO STRIKE THE EMPLOYEE IN THE FACE. EMPLOYEE HAD 2 BROKEN TEETH AND LACERATIONS ON THE LIP.

EMPLOYEE WAS REMOVING OVERSIZED MATERIAL FROM KILN WITH METAL HOOK THE HOOK SLIPPED CAUSING EMPLOYEE TO FALL AND STRIKE HIS SHOULDER

EMPLOYEE WAS RE4OVING "LOGGED" MATERIAL FROM KILN WITH METAL HOOK. MATERIAL FELL ON THE HOOK CAUSING IT TO STRIKE EMPLOYEE IN THE JAW.

EMPLOYEE WAS PU8HING MATERIAL FROM KILN INTO COOLERS THE BAR HE WAS USING SLIPPED OFF MATERIAL AND STRUCK HIM IN THE HEAD.

REMOVING MUD FROM A HAMMERMILL WHEN A PIECE OF METAL CHIPPED OFF AND FLEW INTO LEFT EYE

REMOVING CLINKERS FROM KILN WITH METAL PRY BAR.CLINKER ROLLED ONTO BAR CAUSING IT TO HIT EMPL IN CHIN.