Buscar en el registro

USING RAKE TO FIND METAL ON 2F FEEDER BELT. WHILE RAKING, FELT PINCH IN MIDDLE OF BACK & RIGHT SIDE OF NECK. CHIROPRACTIC TREATMENT SOUGHT.

REMOVING HYDRAULIC CYLINDER PINS ON BACKHOE PINSCOMING OUT VERY HARD WITH A SLEDGE HAMMER SO EE USED JACK HAMMER TO REMOVE PINS. AFTER PINS WEREOUT NOTITICED NUMBNESS AND RECEIVED DIAGNOSES ON 4-1-03

STRIPPING CABLE INSIDE DISCONNECT BOX WHEN KNIFE SLIPPED CUTTING LITTLE FINGER ON LEFT HAND. STITCHES REQUIRED.

LOOSENING NUTS ON H FILTER TO CHANGE BAGS FELT PAIN IN RIGHT WRIST LATER BECAME NUMB. USING WRENCH TO LOOSEN BOLTS.

EE STANDING NEXT TO SHOVEL WHILE VENDOR AND CO. MECHANIC WERE TAKING NEW STYLE TEETH OFF TO CHECK AND CLEAN. WHILE MECHANIC WAS SECURING PIN IN ADAPTOR WITH SLEDGE HAMMER A PIECE OF STEEL FLEW OFF IMBEDDED IN RIGHT SHOULDER RECEIVED MEDICAL NAME ON 9-9-02 INDICATING SURGERY REMOVAL.

UNPLUGGING ROCK FROM PAN FEEDER CHUTE WITH 5' PRY BAR. REACHED DOWN WITH PRYBAR TO UNPLUG FELT PAIN IN BACK. BEGAN LOSING TIME ON 6-25-02.

PRYING ON BEAM TO POSITION FOR INSTALLATION, BARSLIPPED & STRUCK EE IN FACE. LACERATION OF FACE BELOW LEFT EYE.

INSTALLING RETURN ROLLER LYING ON BACK UNDER 17S CONVEYOR. BRAKES ON SOUTH WALL WAS BENT HAD TO BE PRYED BACK INTO POSITION IN AN AWKWARD POSITION. SORE BACK FOLLOWING DAY. PHYSICIAN ORDERED P HYSICAL THERAPY ON 6-6-02.

WORKING ON REPLACING PUMP MOTOR IN 9022 SHOVEL USING CRANE. EE HAD PRY BAR BEHIND MOTOR PULLING MOTOR TOWARDS HIM WHEN PRY BAR SLIPPED HITTING EE. LACERATION BY LIP, 2 STITCHES REQUIRED.

WORKING ON FUSED CODER, EXPERIENCED DISCOMFORT NUMBNESS IN ARM CHEST PAIN DIAGNOSED AS NOT WORK RELATED PERSONAL MEDICAL CONDITION. EE WAS TRYING TO BREAK UP FUSED CODER MASS WITH PRY BAR, ETC . NO MEDICAL TREATMENT OCCURRED UNTIL PT BEGAN AT A LATER DATE.

IN SMALL AREA TORQUE WRENCHING HEAD BOLTS ON #16 CYLINDER ON 9191 TRUCK. FELT PAIN IN BACK AND LEFT LEG.

CLEANING LOWER DECK SCREEN EMPLOYEE FELT SOMETHING PULL IN LEFT SHOULDER BLADE AND NECK, DID NOT REPORT UNTIL 4-12-01 WHEN PAIN WORSENED.

REMOVING BOLT WITH A HYDRAULIC HOSE - PULLING ON WRENCH - FELT PAIN IN RIGHT SHOULDER. RECEIVED PHYSICIAN INFO 4/27/01.

UNPLUGGING # 4 PANFEEDER USING A 5' PRYBAR. USED SIDE TO SIDE MOTION TO LOOSEN ROCK AND STRUCK ELBOW AGAINST DOOR EDGE. ACTING AS OMT(JOB TITLE)-INTERMITTENT FILL. RECEIVED DR. DIAGNOSIS ON 3- 29-01 - SEE ATTACHMENT.

USING KNIFE TO CUT CORNERS OF SCREEN REPLACEMENTS FOR 8F SCREEN. KNIFE SLIPPED, TRIED TO GRAB KNIFE STRIKING HIS LEFT UPPER THIGH.

EE WAS CUTTING WITH TORCH AND SMALL FIRE STARTED. HE TRIED TO PUT IT OUT WITH HIS GLOVE AT THE SAME TIME HIS PARTNER TRIED TO DO THE SAME WITH HIS HAMMER. HAMMER HIT THE TIP OF HIS MIDDLE FING ER.

USING WRENCH TO RELEASE "TIGHT DOG" ON RAILROAD CAR. UNABLE TO FILE SONNER AS WE WERE UNAWARE EMPLOYEE HAD SEEN DOCTOR AND RECEIVED PRESCRIPTION DRUGS.

EE WAS PULLING ON RATCHET WRENCH WHEN HE FELT DISCOMFORT IN RIGHT SHOULDER.

WHILE ATTEMPTING TO REMOVE PIPE GRATING AND VALVE PIPE WRENCH SLIPPED AND FINGER WAS SMASHED BETWEEN PIPE WRENCH & GRATING. EE WENT TO CLINIC AND RECEIVED STITCHES.

WHILE PRYING THE DRIVE REDUCER COVER OFF, WITH A 16" PRY BAR, THE BAR SLIPPED CAUSING HTE POINTED END OF BAR TO PUNCTURE EMPLOYEES CHECK.

WHILE USING A 5' BAR TO INSTALL 1F DUST COLLECTOR HOOD, EE FELT PAIN IN HIS BACK. EE WENT TO THEDR. ON 1-24-00 AND WAS PRESCRIBED PHYSICAL THERAPY FOR A WEEK.

WHILE UNLOADING ORE CARS EMPLOYEE WAS USING A WRENCH TO OPEN DOGS ON THE ORE CARS. BECAUSE SOME OF THE CARS ARE DIFFCULT TO LEFT EE HAD TO APPLY A LOT OF PRESSURE WITH HIS LEFT ARM. EE FELT PA IN IN HIS SHOULDER, WENT TO THE DR. AND ON 1/5/00 RECEIVED A CORTISONE INJECTION IN HIS SHOULDER.

WHILE ATTEMPTING TO OPEN THE VALVE ON #1 TAILS LINE EE FELT PAIN IN HER LOWER BACK. WHEN LIFTING UP ON THE PRY BAR. EE WENT TO THE CHIROPRACTOR ON 9-27-99 AND 9-29-99.

WHILE TIGHTENING A BEARING ON A SHAFT, USING A 12 POUND HAMMER, EMPLOYEE FELT AND HEARD A POP IN HIS RIGHT SHOULDER. WENT TO DOCTOR AND RECEIVED A CORTISONE INJECTION.

WHILE LOOSENING HACKSAW VISE, EMPLOYEE FELT A PULL IN HIS LEFT SHOULDER MUSCLE. ON 04/30/99, EMPLOYEE WAS PRESCRIBED FOUR(4) WEEKS OF PHYSICAL THERAPY.

AFTER USING A 16 LB. SLEDGEHAMMER TO CLOSE THE 4C SYNTRON GATE DOOR EE LOST STRENGTH IN HIS LEFT HAND AND WAS UNABLE TO SPREAD FINGERS OR THUMB. EE WENT TO THE CHIROPRACTOR ON 4-21-99 AND BILL FOR TREATMENT WAS RECEIVED 5-12-99.

WHILE USING A POCKET KNIFE TO CUT A RAG TO CLEANTHE BATHROOM URINALS, EE CUT HIS LEFT HAND INDEXFINGER. EE RECD 3 STITCHES

WHILE EMPLOYEE WAS REPAIRING A HYDRAULIC LEAK ONTHE 9024 SHOVEL HIS WRENCH SLIPPED CAUSING HIM TO CUT HIS FINGER. EMPLOYEE WENT TO THE DOCTOR'SWHERE HE RECEIVED STITCHES.

WHILE LIFTING A 3/4" IMPACK WRENCH TO TIGHTEN PILLOW BLOCKS ON THE #8 TRIPPER CAR, EE FELT MUSCLE STRAIN IN HIS NECK. PER 4/21/99 REPORT OF WORKABILITY EE HAS BEEN RX 4 WKS OF PHYSICAL THERA PY

ELECTRICIAN WAS STRIPPING CABLE TO MAKE A CONNECTION WHEN THE KNIFE SLIPPED AND HE CUT HIS FINGER REQUIRING SUTURES.

EE, AN ELECTRICIAN, WAS USING A KNIFE TO REMOVE INSULATION FROM AN ELECTRICAL WIRE WHEN THE KNIFE SLIPPED AND HE LACERATED HIS LEFT THIGH, REQUIRING SUTURES.

EMPLOYEE WAS USING A KNIFE TO CUT TWINE FOR TYING HAY BAGS FOR DRILL HOLES WHEN HE ACCIDENTLY CUT HIS FINGER. EMPLOYEE WAS BROUGHT TO DOCTOR WHERE HE RECEIVED STITCHES.

EMPLOYEE WAS ATTEMPTING TO SEPARATE TWO WALKWAYS FROM EACH OTHER AND USING A CHAIN SPREADER AND A MOBILE CRANE WHEN HIS FINGERS GOT CAUGHT BETWEEN THE TWO WALKWAYS. HE WAS TRANSPORTED TO CLINI C AND RECEIVED SUTURES.

EE WAS STANDING 5' AWAY FROM BEARING RACE THAT WAS STRUCK WITH A HAMMER BY A FELLOW EE. A SMALL PIECE OF THE BEARING RACE FRACTURED AND FLEW THROUGH THE AIR STRIKING INJURED IN THE FOREHEAD. E E WAS BROUGHT TO EMERGENCY ROOM AND STEEL PIECE REMOVED FROM HIS HEAD.

EE WAS USING A JACKHAMMER BIT TO PRY A CHUNK OF MATERIAL WHEN THE CHUNK SHIFTED CAUSING HIS ARM TO BE PINNED AGAINST DOORWAY OFF HOPPER. THIS CAUSED BRUISING AND EMPLOYEE WAS ASSIGNED RESTRICT ED DUTY AND USE OF SLING FOR HIS ARM.

EE WAS USING A KNIFE TO STRIP THE INSULATION FROM AN ELECTRICAL CABLE WHEN HE CUT HIS FINGER, REQUIRING SUTURES.

ON 1/2/98 A MAINT. MECHANIC WAS USING A HYDRAULIC WRENCH IN HIS WORK REPAIRNING A 36" CRUSHER. WHEN HE LIFTED THE WRENCH HE FELT PAIN IN HIS GROIN. ON 1/8/98 HE BEGAN LOSING DAYS FROM WORK DUE TO SURGERY TO REPAIR A HERNIA.

EE WAS ATTEMPTING TO ROTATE FILTER DRIVE GEAR WITH A FIVE FOOT BAR. THE BAR SLIPPED & HE FELT PAIN IN SHOULDER & ELBOW ON RIGHT SIDE. HE WENT TO DR. WHO PRESCRIBED RESTRICTED DUTY.

EE WAS USING A 5' PRY BAR TO REMOVE A PUMP MOTOR FROM ITS BASE WHEN THE BAR SLIPPED & STRUCK HIM IN THE FACE CAUSING A FRACTURED CHECK BONE.

EE WAS POSITIONING A ROCK HOOK TO FACILITATE CLEANING OUT OF A CRUSHER WHEN HE PINCHED HIS FINGER BETWEEN THE HOOK AND THE CRUSHER BONNET RESULTING IN A MINOR FRACTURE TO HIS LEFT INDEX FINGER .

EE WAS LIFTING A LIFTER BAR FROM A PALLET. THE BAR STUCK AND CAUSED HIS KNEE TO OVER EXTEND. THE EE CONTINUED TO WORK UNTIL 9-3-97 WHEN HE HAD SURGERY TO REPAIR HIS KNEE. AND MISSED WHEN HE HA D SURGERY TO REPAIR HIS KNEE. AND MISSED TIME FROM WORK.

EE JUMPED ON A PIPE WRENCH & THE JARRING PULLED MUSCLES IN HIS NECK.

EE WAS SHOVELING OFF SEAL BELT WHEN THE SHOVEL STRUCK AN OBJECT IN THE PILE, CAUSING STRAIN TO HIS RIGHT ARM. AT THE END OF HIS SHIFT HE NOTICED IT WAS RED & SORE. AT THE APPROX SAME TIME HE WAS USING A HAMMER & PUNCH & STRUCK HIS THUMB WITH THE HAMMER

EMPLOYEE WAS PULLING ON WRENCH TO UNBOLT HYDRUALIC LINE WHEN HE FELT A PAIN IN SHOULDER-IT WAS MEDICALLY DETERMINED THAT HE HAD TORN A TENDON & MUSCLE LOOSE FROM HIS SHOULDER AND IT WILL BE SURGICALLY REPAIRED ON AN OUTPATIENT BASIS.

EE WAS USING A PRY BAR TO REMOVE A BEARING FROM AN AGITATOR, THE BAR SLIPPED CAUSING HIM TO BUMP HIS ELBOW AGAINST A PIECE OF METAL. THIS RESULTED IN A BRUIWED ELBOW AND HE WAS ASSIGNED TO 5 D AYS OF NO HEAVEY LIFTING AT HIS REGULAR JOB.

EMPLOYEE WAS USING A KNIFE TO CUT A RUBBER HOSE WHEN THE KNIFE SLIPPED AND CAUGHT HIS KNEE RESULTING IN LACERATIONS TO HIS KNEE AND REQUIRING TWO STITCHES AND RESTICTED DUTY.

EMP WAS USING A 5" PRY BAR TO CHECK CONVEYOR SHAFT BEARINGS WHEN BAR SLIPPED CAUSING HIM TO FALL BACKWARDS FROM A 3' PLATFORM. THIS RESULTED IN RESTRICTIONS TO WORK.

EMPLOYEE WAS USING A SLEDGE HAMMER TO OPEN A SECONDARY CRUSHER DOOR WHEN HE FELT PAIN IN BACK. EMPLOYEE HAS A HISTORY OF BACK PROBLEMS.

EMP WAS UNLOADING A LIME STONE CAR AND WAS USING A 5' PRY BAR TO PRY LOOSE A STUCK VIBRATOR ON ACHUTE WHEN THE BAR SLIPPED AND HE HIT HIS CHIN ON THE RAIL CAR CAUSING A SORE NECK AND CHIN. THE DR RESTRICTED LIFTING TO 20LBS DUE TO NECK INJ.

EMPLOYEE WAS USING A JACK AND A CHANNEL IRON TO CHANGE CONVEYOR BELT ROLLERS. WHEN THE JACK WAS RELEASED THE LENGTH OF CHANNEL IRON FELL ON HIS ARM CAUSING CONTUSION TO LEFT FOREARM, THIS RESU LTED IN FIVE DAYS RESTRICTED DUTY.