20 de septiembre de 2023MN · Metal/No metálicoEncargado de mantenimiento, Mecánico, Reparador/Encargado de servicio, Calderero, Abastecedor de combustible, Técnico de llantas, Técnico de servicio en campoHERRAMIENTAS MANUALES (SIN MOTOR)
Employee states that they were holding a 3lb hammer in right hand while holding a pin hammer with left hand. Pin hammer point was touching a brake pin. While making first strike with 3lb hammer the hammer missed the pin hammer head striking employee's left hand.
Employee was attempting to adjust a pan chain of the stamler pan feeder. Two 1" nylon straps were attached to the pan and a come-along. Employee was ratcheting on come-along when the pan shifted causing the weight of the pan to rest on one of the nylon straps. This caused the nylon strap to break. The come-along struck employee in right rib area.
26 de enero de 2021MN · Metal/No metálicoOperario de servicios generales, Técnico de turno, Operador de camión de servicio/volteoHERRAMIENTAS MANUALES (SIN MOTOR)
Employee was using a knife to cut the tie wrap from around the block heater cord on personal vehicle, when the knife lacerated thumb requiring 2 stitches.
5 de marzo de 2020MN · Metal/No metálicoEncargado de mantenimiento, Mecánico, Reparador/Encargado de servicio, Calderero, Abastecedor de combustible, Técnico de llantas, Técnico de servicio en campoHERRAMIENTAS MANUALES (SIN MOTOR)
Employees were changing lip shrouds on a Shovel bucket. They were pounding on the old liner and a small piece of metal struck the employee in the abdomen causing a cut which required sutures.
11 de agosto de 2019MN · Metal/No metálicoEncargado de mantenimiento, Mecánico, Reparador/Encargado de servicio, Calderero, Abastecedor de combustible, Técnico de llantas, Técnico de servicio en campoHERRAMIENTAS MANUALES (SIN MOTOR)
An air hammer bit got stuck in the wall trying to relieve old concave liners from the primary crusher mainframe. A coworker hit the bit with a hammer, and the bit came free cutting EE's finger and stomach.
17 de julio de 2018MN · Metal/No metálicoEncargado de mantenimiento, Mecánico, Reparador/Encargado de servicio, Calderero, Abastecedor de combustible, Técnico de llantas, Técnico de servicio en campoHERRAMIENTAS MANUALES (SIN MOTOR)
Employee was pounding out a roller set from a frame and hit left fifth finger. On 4/10/2017, employee was diagnosed with a fracture and placed on restrictions.
6 de febrero de 2017MN · Metal/No metálicoAlmacenista, Ensacador, Paletizador/Apilador, Encargado de almacén, Empacador, Fabricante, Operador de planta de lavadoHERRAMIENTAS MANUALES (SIN MOTOR)
Employee was using sledge hammer to break free plugged material from frozen flux bin. After, ee felt a pain and tingling sensation in lower abdomen. On 3/1/2017, ee was diagnosed with a hernia.
Employee was using chuck wrench to loosen chuck on lathe to remove a part. Employee felt a strain in forearm. Employee saw a dr. on 9/26/2016 was placed on restrictions. Employee was diagnosed with forearm intersection syndrome.
24 de agosto de 2016MN · Metal/No metálicoEncargado de mantenimiento, Mecánico, Reparador/Encargado de servicio, Calderero, Abastecedor de combustible, Técnico de llantas, Técnico de servicio en campoHERRAMIENTAS MANUALES (SIN MOTOR)
Employee aggravated a pre-existing condition in left hand. EE had surgery this day for trigger finger. EE was using a pry bar to remove an old insulator and felt a pop in hand.
An employee was cutting off an old hose from an air grinder and the utility knife slipped resulting in a cut to EE's left first finger. EE received one stitch.
Employee was cutting plastic cable tie with a utility knife, the knife slipped and punctured the web between the thumb and index finger of the right hand, resulting in a laceration approximately 3/4" long. He received four stitches.
13 de febrero de 2014MN · Metal/No metálicoObrero, Herrero, Cuadrilla, Mensajero de repuestos, Peón, Recolector, Operario de minaHERRAMIENTAS MANUALES (SIN MOTOR)
Employee was helping to break up frozen chunks with a bar and pinched his finger between the bar & the chute edge. This resulted in a tuft fracture of the 4th finger, right hand.
Employee was holding air arc torch handle in left hand. With a screwdriver, he attempted to remove screw from handle. The screw was tight therefore, he applied force and the screwdriver slipped off the screw and punctured the web between his left thumb and forefinger. He received four stitches.
13 de abril de 2012MN · Metal/No metálicoEncargado de mantenimiento, Mecánico, Reparador/Encargado de servicio, Calderero, Abastecedor de combustible, Técnico de llantas, Técnico de servicio en campoHERRAMIENTAS MANUALES (SIN MOTOR)
Employee was removing pound-down skirting with a 4 lb hammer. He hit the trougher frame with the hammer and his second finger, left hand was between the trougher frame and hammer handle.
26 de julio de 2010MN · Metal/No metálicoEncargado de mantenimiento, Mecánico, Reparador/Encargado de servicio, Calderero, Abastecedor de combustible, Técnico de llantas, Técnico de servicio en campoHERRAMIENTAS MANUALES (SIN MOTOR)
The employee was tightening bolts with a rachet and socket on the 34DL04 drill leveling jack pad. The socket slipped and the employee fell backwards catching himself with his left hand on a sharp edged rock. Employee received two stitches.
18 de septiembre de 2009MN · Metal/No metálicoEncargado de mantenimiento, Mecánico, Reparador/Encargado de servicio, Calderero, Abastecedor de combustible, Técnico de llantas, Técnico de servicio en campoHERRAMIENTAS MANUALES (SIN MOTOR)
Employee was cutting bands on a bundle of strap, when the bands were cut and broke free, the employee's hand continued upward and hit the iron rack above.
20 de junio de 2008MN · Metal/No metálicoEncargado de mantenimiento, Mecánico, Reparador/Encargado de servicio, Calderero, Abastecedor de combustible, Técnico de llantas, Técnico de servicio en campoHERRAMIENTAS MANUALES (SIN MOTOR)
Pushing and pulling on pipe wrenches on a 1" union.
7 de enero de 2008MN · Metal/No metálicoEncargado de mantenimiento, Mecánico, Reparador/Encargado de servicio, Calderero, Abastecedor de combustible, Técnico de llantas, Técnico de servicio en campoHERRAMIENTAS MANUALES (SIN MOTOR)
5 de noviembre de 2007MN · Metal/No metálicoEncargado de mantenimiento, Mecánico, Reparador/Encargado de servicio, Calderero, Abastecedor de combustible, Técnico de llantas, Técnico de servicio en campoHERRAMIENTAS MANUALES (SIN MOTOR)
19 de octubre de 2007MN · Metal/No metálicoObrero, Herrero, Cuadrilla, Mensajero de repuestos, Peón, Recolector, Operario de minaHERRAMIENTAS MANUALES (SIN MOTOR)
Employee was securing equipment with chain and chain binder. When trying to lock chain binder, the pipe binder kicked back and hit the injured in the chin.
3 de febrero de 2005MN · Metal/No metálicoObrero, Herrero, Cuadrilla, Mensajero de repuestos, Peón, Recolector, Operario de minaHERRAMIENTAS MANUALES (SIN MOTOR)
EE fractured left thumb when the bar EE was using to pry apart two mill rods which were frozen together, slipped when they broke apart and EE fell against one of the rods with hand. EE went to the doctor on 2/04/05 after thumb had swollen up over night. X-rays showed a fracture.
23 de agosto de 2004MN · Metal/No metálicoEncargado de mantenimiento, Mecánico, Reparador/Encargado de servicio, Calderero, Abastecedor de combustible, Técnico de llantas, Técnico de servicio en campoHERRAMIENTAS MANUALES (SIN MOTOR)
Injured was removing the inner race of a bearing from a crusher counter-shaft housing with a bar and hammer. He was holding the bar and a co-worker was hitting the bar with the hammer. He moved the bar while the co-worker swung the hammer and the bar bounced up striking his left cheek causing a laceration which required sutures.
16 de febrero de 2003MN · Metal/No metálicoEncargado de mantenimiento, Mecánico, Reparador/Encargado de servicio, Calderero, Abastecedor de combustible, Técnico de llantas, Técnico de servicio en campoHERRAMIENTAS MANUALES (SIN MOTOR)
INJURED WAS STRUCK IN THE STOMACH WITH A PIECE OF METAL WHICH BROKE OFF A LIP LINER ON A SHOVEL BUCKET WHILE BEING KNOCKED LOOSE WITH A SLEDGE HAMMER. THE PIECE NEEDED TO BE SURGICALLY REMOVE D AND REQUIRED STITCHES.
20 de noviembre de 2002MN · Metal/No metálicoEncargado de mantenimiento, Mecánico, Reparador/Encargado de servicio, Calderero, Abastecedor de combustible, Técnico de llantas, Técnico de servicio en campoHERRAMIENTAS MANUALES (SIN MOTOR)
INJURED LACERATED HIS THUMB WHEN HE STRUCK IT WITH A HAMMER WHILE DRIVING A BOLT OUT OF THE CONVEYOR FRAME.
20 de octubre de 2002MN · Metal/No metálicoAlmacenista, Ensacador, Paletizador/Apilador, Encargado de almacén, Empacador, Fabricante, Operador de planta de lavadoHERRAMIENTAS MANUALES (SIN MOTOR)
INJURED FRACTURED THE TIP OF HER LEFT THUMB WHEN SHE STRUCK IT WITH A HAMMER WHILE PUTTING ON A FILTER SECTOR CLAMP.
19 de abril de 2002MN · Metal/No metálicoEncargado de mantenimiento, Mecánico, Reparador/Encargado de servicio, Calderero, Abastecedor de combustible, Técnico de llantas, Técnico de servicio en campoHERRAMIENTAS MANUALES (SIN MOTOR)
INJURED FRACTURED HIS LEFT THUMB WHEN HE HIT IT WITH A FOUR POUND HAMMER WHILE REMOVING A KEEPER FROM A KINGPIN.
12 de noviembre de 2001MN · Metal/No metálicoEncargado de mantenimiento, Mecánico, Reparador/Encargado de servicio, Calderero, Abastecedor de combustible, Técnico de llantas, Técnico de servicio en campoHERRAMIENTAS MANUALES (SIN MOTOR)
INJURED LACERATED HIS RIGHT LITTLE FINGER WHEN HE PINCHED IT BETWEEN A RATCHET AND A METAL DOOR (LATE DR.'S REPORT)
10 de octubre de 2001MN · Metal/No metálicoAlmacenista, Ensacador, Paletizador/Apilador, Encargado de almacén, Empacador, Fabricante, Operador de planta de lavadoHERRAMIENTAS MANUALES (SIN MOTOR)
INJURED STRAINED HER UPPER BACK WHILE PRYING AN ACCESS DOOR OPEN WITH A SMALL BAR.
10 de septiembre de 2001MN · Metal/No metálicoEncargado de mantenimiento, Mecánico, Reparador/Encargado de servicio, Calderero, Abastecedor de combustible, Técnico de llantas, Técnico de servicio en campoHERRAMIENTAS MANUALES (SIN MOTOR)
INJURED PINCHED HIS LEFT RING FINGER BETWEEN THE ROTARY DRILL BIT AND THE DRILL BIT WRENCH HE WAS USING WHEN THE WRENCH SLIPPED FROM HIS HAND AND FELL ON HIS FINGER.
3 de mayo de 2001MN · Metal/No metálicoEncargado de mantenimiento, Mecánico, Reparador/Encargado de servicio, Calderero, Abastecedor de combustible, Técnico de llantas, Técnico de servicio en campoHERRAMIENTAS MANUALES (SIN MOTOR)
INJURED STRAINED HIS SHOULDER AND NECK WHEN THE PIPE WRENCH HE WAS USING SLIPPED CAUSING HIM TO BE JARRED. INJURED DID NOT GOIN TO THE DR UNTIL 6-26. HE AGGRAVATED APREVIOUS OFF THE JOB (CAR A CCIDENT) INJURY WHICH REQUIRED FUSION SURGERY. HE WILL BE SCHEDULED FOR SURGERY ON 7-20-01.
14 de marzo de 2001MN · Metal/No metálicoEncargado de mantenimiento, Mecánico, Reparador/Encargado de servicio, Calderero, Abastecedor de combustible, Técnico de llantas, Técnico de servicio en campoHERRAMIENTAS MANUALES (SIN MOTOR)
INJURED WAS MOVING A FLOOR HOIST WITH A BAR WHENTHE TIP OF THE BAR BROKE OFF CAUSING A SUDDEN JARRING TO THE RIGHT SHOULDER.
14 de septiembre de 1999MN · Metal/No metálicoEncargado de mantenimiento, Mecánico, Reparador/Encargado de servicio, Calderero, Abastecedor de combustible, Técnico de llantas, Técnico de servicio en campoHERRAMIENTAS MANUALES (SIN MOTOR)