Buscar en el registro

Employee was struck in the head with a chain that was being used to pull EE's shuttle car to get it unstuck.

Employee was beating on piece of metal when a slender piece of metal about 1/4 inch long impaled in their left inner thigh.

Employee was using sledgehammer to drive pin in on Highwall Miner and turned causing strain to lower back.

Employee was putting in transmission in 40-ton Truck, when the Come-Along slipped pinning the employee's left arm against frame of Truck.

Employee was welding on pipe when a hot piece of metal melted employee's glove & burnt right index finger, later on that morning employee was smacking down a screen with a hammer when employee hit the same finger with the hammer, employee did not report to Foreman until 11-16-19, had surgery on finger & is still in Hospital.

Employee was changing a hydraulic filter on a D-11 Dozer when employee's wrench slipped, employee fell off dozer on ground cutting right side of face above ear, receiving (5) staples.

Employee was working on segments on D11 Dozer when EE was hitting with hammer a piece of metal flew off and hit EE on right shoulder embedding itself. Worked until EE had surgery on shoulder 7-30-19.

Employee was hitting gear on refuse belt at Washer Plant with sledge hammer when he felt a burning sensation in his stomach.

Employee was using a chipping hammer to change metal screens on a vibrator when a piece of metal flew into right eye around safety glasses.

Employee was taking drain plug out of 980g loader using a wrench when he felt a pain in his right shoulder and bicep.

Employee was splicing wire for CB radio on a 924 Loader when his knife slipped, and sliced his right thumb. Employee went to doctor on 9/27/2011.

Employee was removing a final drive to the ground when the chain came loose and hit employee in the mouth.

Employee was using a pry bar to remove a transmission out of a 777 truck when his hand slipped off the pry bar and his struck the 777 truck.

Employee was cutting the tip off a silicon tube when the knife slipped and stabbed himself in the right leg above the knee.

Employee was trying to clear a crusher, when the bar he was using, slipped and caught his left forefinger between the bar and the side of the crusher. The metal ripped the meat from the finger at the second joint and broke his finger.

Employee was helping mechanic beat a pin out of a 777D truck strut when a piece of metal broke off the hammer striking the employee in the thigh.

EE WAS HITTING A PIN ON HIS EXCAVATOR WHEN A PIECE OF THE PIN BROKE OFF STRIKING THE EE ABOVE THE RIGHT EYEBROW. EE RECEIVED 3 STITCHES ABOVE HIS EYEBROW.

EMPLOYEE WAS USING A CHAIN TO LIFT PARTS WHEN THE CHAIN CAUGHT HIS LEFT INDEX FINGER AGAINST DOZER FRAME.

EE WAS TIGHTNING LUG NUTS ON COAL TRUCK WHEN HE FELT PAIN IN HIS LOWER BACK.

EMPLOYEE WAS DRIVING A GEAR OFF A SHAFT WHEN HE STRUCK HIS LEFT FOREFINGER WITH A HAMMER.

FOREMAN WAS BUSTING UP A PALLET WITH A SLEDGEHAMMER WHEN A PIECE OF THE PALLET FLEW OFF AND HIT THE EE IN THE FOREHEAD.

EE WAS REMOVING OLD WOOD FROM THE BED OF A FLATBED TRUCK WITH A PRYBAR. THE BAR SLIPPED AND THE EE FELL OFF TRUCK LANDING ON HIS LEFT ARM.

EMP WAS ATTEMPTING TO KNOCK A U JOINT OUT OF DRIVELINE WHEN HE HIT HIS FINGER WITH A HAMMER.

EMPLOYEE REMOVED THE BOLTS FROM CAP ON PLANATARYON A 992 LOADER, THEN DROPPED CAP ON HIS LEFT HAND MASHING HIS MIDDLE FINGER.

EMPLOYEE WAS MOVING A BRAKE CHAMBER USING A SLATE BAR. THE SLATE BAR SLIPPED AND BUMPED HIS RIGHT KNEE.

EE WAS REPLACING THE WHEEL BEARING ON 777B 4YC1327 WHEN THE BAR HE HELD SLIPPED WHEN THE BAR SLIPPED HE HIT FINGER WITH A HAMMER THE HAMMER HIT THE LITTLE FINGER ON HIS LEFT HAND

INJURED WAS PUTTING TEETH ON A SPARE 992 BUCKET. HE WAS HITTING A TOOTH WITHA 4LB HAMMER. WHEN HE HIT THE TOOTH A SLIVER OF METAL FLEW. THE SLIVER OF METAL FROM THE TOOTH BECAME AIRBORNE A ND IMBEDDED IN ELFT SIDE OF HIS NECK.

EE WAS HELPING LOAD A 992 C BUCKET FOR REPAIRS AND WAS REMOVING THE TEETH FROM THE BUCKET. WHEN HE HIT THE LAST TOOTH WITH A 16 SLEDGE HAMMER A SLIVER OF METAL BECAME AIRBORNE AND IMBEDDED ITS ELF IN HIS LEFT FOREARM.

INJURED WAS DRIVING THE TOP PIN OUT OF BLADE ON D8L53Y2831 AND WAS HOLDING THE EXTENSION WIHT HIS LEFT HAND. WHEN HE SWUNG THE SLEDGE HAMMER, HE MISSED. THE ENTENSION AND STRUCK HIS LEFT HAN D WITH THE HAMMER, TEREBY FRACTURING BONE IN 1ST JOINT OF RING FINGER.

EMPLOYEE WAS ATTEMPTING TO LOOSEN FINAL DRIVE BOLTS USING A 4' RATCHET WITH A 6' BREAKER BAR HANDLE EXTENSION, BECAUSE BOLTS WERE EXTREMELY TIGHT. IN PERFORMING THIS TASK, EMPLOYEE STRAINED HI S BACK AND NECK.

I NAME WAS USING PUMP TO PULL BUSHINGS ON RT LIFT ARM OF 992C 42X1042 AS I NAME PUMPED UP THE PRESSURE ONE OF THE BOLTS BROKE THE HEAD OF THE BOLT FLEW OFF A SMALL LAERATION IN THE CENTER OF T HE PALM OF HIS LEFT HAND NEEDED 3 STITCHES

EE WAS HELPING THE MECHANICS REPLACE THE WEAR PLATES ON THE BUCKET OF 992 42X1042 AND WAS TIGHTENING SOME BOLTS. WHEN HE PULLED DOWN ON THE 1 1/2 WRENCH IT SLPPE OFF OF THE NUT AND HIT HIS HEA D JUST ABOVE THE HAIR LINE AND CAUSED A 2" LACERATION TOOK 9 STITCHES TO CLOSE.

I.NAME HELPING MECHANIC CHANGE RIGHT FRONT TIRE OF 50 TON TRUCK WHILE LIFTING TIRE WITH 3/8"LOG CHAIN.EMPL HIT RIM WITH 16 LB SLEDGEHAMMER TRYING TO LOOSEN IT TO REMOVE FLAT TIRE.WHEN HAMMER J ARRED TIRE,CHAIN CAME LOOSE AND HIT I.NAME ON RIGHT HAND SIDE OF FACE CAUSING LACERATIONS.

I.NAME HELPING MECHANIC PUT FOOT VALVE IN TRUCK.POSITIONED IN TRUCK AWKWARDLY ,AS HE WAS BENT OVER AND TWISTED TO SEE BRAKE PEDAL.FELT PAIN IN HECK AND LOWER BACK.POSITION CAUSED STRAIN.

DRILLER WAS HELPING MECHNIC PUT PINS BACK IN DRILL TRACK. MECHNIC STRUCK PIN WITH SLDGE HAMMER AND PIN OR BOLT STRUCK DRILLER JUST OVER HIS LETFT EYE BELOW HARD HAT.

MECHANIC WAS REPLACING SCISSOR ARM ON 992C FRONT END LOADER MECHANIC AND HELPER WERE REMOVING PIN W/ PIN KNOCKER TOOL PIN KNOCKER TOOL-SLEDGE HAMMER W/ PIN WHICH IS STRUCK BY ANOTHER SLEDGE HA MMER TO REMOVE PIN TOOL SLIPPED AND STRUCK MECHANIC IN GROIN AREA

MECHANIC WAS PUTTING AN ELECTRIC MOTOR IN CAT 910C LOADER. HE WAS LINING UP BRANGHES WITH POCKET KNIFE. KNIFE SLIPPED OUT MECHANIC.

DOING ROUTINE SERVICE OF EQUIP AT END OF SHIFT WENT TO CUT OFF FUEL PUMP LOCATED UNDER BED BEHING CAB STRUCK HEAD ON BED SERVICE TRUCK.

EMPLOYEE WAS PUTTING TOGETHER TWO SECTION OF METAL PIPE STRIKING OF PIPE FROM HAMMER CAUSED PIECE OF METAL TO GET INTO EMPLOYEES EYE

USING COME-A-LONG TO LINE UP BELLY PAN UP ON DOZER....COME-A-LONG BROKE STRIKING BAR WHICH BOUNCED OFF SHOES STRIKING BETWEEN BIG TOE AND NEX T TOE.BRUISED LIGAMENTS IN RIGHT FOOT.