Buscar en el registro

INDIVIDUAL DID NOT RETRACT THE BLADE OF BOX KNIFE COMPLETELY. IN TURN IT CUT HIS HAND.

EMPLOYEE WAS CHANGING ROUTER BIT ON DOZER RIPPER. HE WAS SUPPORTING A PUNCH WITH HIS KNEE & MISSED THE PUNCH & HIT HIS KNEE WITH A HAMMER.

CLEANING UP OIL SPILL IN SHOP, PUSHING WET FLOOR DRY WITH FLOOR SCRAPER. TWISTED SCRAPER TO TURN FLOOR DRY OVER AND HEARD A POP AND FELT PAIN IN RIGHT CHEST TO UNDER RIGHT SHOULDER. EMPLOYEE DIAGNOSIS- CRACKED RIGHT 3RD RIB.

LINING UP END LINK ON DRAG CHAIN IN DRAG SOCKET, USING A BAR. BAR SLIPPED SMASHING LEFT LITTLE FINGER.

AN EMP OF CARR CONSTRUCTION WAS SQUATTING IN FRONT OF LEFT CUTTING EDGE OF A 627E SCRAPER, OWNEDBY CARR CONST. WAS TAKING BOLTS OUT OF CUTTING EDGE, TAPPING LOOSE BOLTS OUT, WHEN A FROZEN DIRT CLUMP FELL FROM TOP OF DRAFT ARM OF SCRAPER STRIKING HIM ON NECK AND BACK. WAS WEARING SAFETY GLASSES, HARD HAT AND STEEL TOED BOOTS.

AS PART OF CHANGING OUT A HYDRAULIC PUMP ON A MOTOR GRADER THE DRIVE YOLK MUST BE REMOVED FROM THE OLD PUMP. THE REMOVAL OF THE DRIVE YOLK IS DONE USING A GEAR PULLER. AS THE GEAR PULLER WAS BEING TIGHTENED THE MECHANIC USED HIS LEFT HAND TO STEADY THE GEAR PULLER. WHEN THE DRIVE YOLK BROKE LOOSE, THE MECHANIC'S LEFT MIDDLE & INDEX FINGERS WERE PINCHED BETWEEN YOLK & GEAR PULLER.

THE TOOL BEING USED TO TIGHTEN A WHEEL BEARING NUT SLIPPED WHEN THE NUT CAME FREE & RIGHT ELBOW HIT THE WHEEL HUB

WHILE PUSHING MUD ON SHOP FLOOR WITH A BROOM, FELT A STRAIN IN LEFT SHOULDER.

WHILE ADJUSTING A MIRROR ON A HAUL TRUCK, EMPLOYEE FELT PAIN IN LEFT SHOULDER AFTER PULLING ON A WRENCH.

WHILE LOOSENING TRACK ROLLER BOLTS ON A DRILL, EE FEL A SHARP PAIN IN LEFT MIDDLE FINGER. HE WAS PULLING UP ON A LONG HANDLE DRIVE RATCHET.

EMPLOYEE REMOVING RETAINING RING, HEAD OF HAMMER CAME OFF STRIKING EMPLOYEE IN CHIN.

SWINGING A SLEDGEHAMMER TO HIT A WEDGE ON THE DRAG ROPE SOCKET,EMPL FELT PAIN IN RIGHT SHOULDER.

EMPL WAS USING MAUL TO DRIVE SPIKES. WHEN HE HITCHUNCK OF BALLAST WITH MAUL BALLAST BOUNCED UP & HIT HIM IN MOUTH.

EMPLOYEE WAS JACKING A PORT-A-POWER RAM WHILE SITTING ON HOIST DRUM PUMP WAS OFF TO THE RT SIDE OF EMPLOYEE A TWINGE WAS FELT IN EMPLOYEES BACK & PAIN FOLLOWED

EMPLOYEE WAS USING A BOX KNIFE TO OPEN BOXES AND THE KNIFE SLIPPED, CUTTING ALONG THE OUTSIDE OF LEFT THUMB, REQUIRING STITCHES.

EMPLOYEE WAS COOLING THICK PIECES OF IRON HOLDING IT WITH CHANNEL LOCK PLIERS WITH ARMS EXTENDED WHICH CAUSED A MUSCLE STRAIN

WHILE CHIPPING MUD FORM CUTTING EDGES ON DOZER 333 THE BAR I NAME WAS USING SLIPPED AGAINST A PIECE OF PACKED ONDIRT HIS MOTION WITH BAR CAUSED HIM TO STRIKE HIS HAND ON THE EXPOSED EDGE OF CU TTING EDGE CAUSING LACERATION TO FINGER

EMPLOYEE WAS INSTALLING NEW ROLLERS ON D-9 USING A HOIST AND A TOOL TO POSITION ROLLERS.ROLLER BECAME DISLODGED FROM POSITION AN PINCHED EMPLOYEES RIGHT RING AND LITTLE FINGERS,FRACTURING THE M.

EMP. WAS HOOKING A COME ALONG ON TO A FAIRLEAD OF THE DRAGLINE AND FELT PAIN IN HIS LOWER BACK.

EMPLOYEE WAS CL9ANING IN A SMALL COMPRESSOR ROOM H IT HS RT.ARM ABOVE ELBOW & LATER EMPLOYEE PULLED TO HARD ON A WRENCH & HURT ARM AGAIN (EMPLOYEE BUMPED ARM ON AN ELECTGRICAL BOX)

EMPLOYEE WAS ST9AIGHTENING A BRACKET FOR P.T.O. AIR CYCLINDER. HE HAD THE BRACKET SECURED IN A VISE AND HIT IT WITH HIS HAMMER.A PIECE OF THE HAMMER CHIPPED OFF AND STRUCK EMPLOYEE IN THE LEF T HAND. 3

EMPLOYEE WAS OP9NING A BOX,HOLDING THE TOP OF THE BOX WITH LEFT HAND AND CUT TOWARD SELF,CUTTING LEFT HAND.

EMPLOYEE WAS AD4USTING A BRAKE ROD ON A RAILROAD COAL CAR. THE WRENCH SLIPPED ON TEH BRAKE NUT CATCHING EMPLOYEE'S LITTLE FINGER BETWEEN WRENCH HAND AND FRAME OF CAR. EMPLOYEE FRACTURED END BO NE IN RIGHT LIT7LE FINGER.

EMPL BOLTING SP5RE TIRE RACK IN PICKUP,SOCKET SLIPPED ON BOLT HEAD CAUSING EMPL TO HIT HAND ON SHARP EDGE ON TIRE TRACK.

EMPLOYEE WAS RE4OVING A NUT OFF OF A PUMP AND WRENCH SLIPPED AND HIT HIS FINGER.

EMP WAS HOLDING A SPIKE TO DRIVE ANOTHER S IKE INTO A TIE IN ORDER TO GET A TIE PLATE OUT ON THE RAILROAD. THE PERSON DRIVING THE SPIKE WITH A SPIKE HAMMER MISSED THE SPIKE AND HIT THE E MPLOYEES LEFT HAND THUS INJURING TWO FINGERS

EMPL ATTACHED WIRE MESH PULLIN GRIP TO BUNDLE OF ELEC WIRES TO FACILITATE PULLING THEM THROUGH RESTRICTED AREA.BUNDLE CAUGHT ON METAL LIP NEAR WORKAREA.EMPL TRIED TO EXTRICATE AND GUIDE BUNDLE WITH HANDS.GRIP BROKE AND LACERATED EMPL FINGER.

BREAKING COAL INSIDE CRUSHER WITH SLEDGE HAMMER,LARGE CHUNK OF COAL BROKE,EMPL FELL BACKWARDS AND TWISTED KNEE.