Buscar en el registro

INJURED HAD STOPPED TO HELP ANOTHER PERSON RECONNECT A SHEAR CYCLINDER FOR THE CUTTER HEAD OF A CONTINUOUS MINER.WHILE GUIDING THE CYL ROD WITH HIS HAND WHILE THE OTHER PERSON USED A PRYBAR.TH E PRYBAR SLIPPED OFF THE JACK ALLLOWING THE JACK TO PINCH OR SMASH INJUREDS SMALL FINGER BETWEEN IT AND A SUPPLY CAR.

PULLING ON CONE-A-LONG TO ALIGN PIN ON A BATTERY SCOPP CENTER SECTION.THIS WAS PART OF A REBUILD ON SCOOP UNDERGROUND.WHILE PULLING ON COME-ALONG FELT PAIN IN LOWER BACK INJURED WAS STANDING F LAT FOOTED AND UP RIGHT NEXT TO SCOOP AT THE TIM OF ACCIDENT.

WAS TIGH TENING A CENTER SECTION ON A RAM CARA USING A 3/4 DRIVE RATCHET SOCKET SLIPPED OF BOLT ALLOWING I NAME TO FALL FORWARD SMASHING HIS FINGER BETWEEN RATCHET & RAM CAR CANOPY THIS RESULT ED IN A FX OF THE END OF MIDDLE FINGER ON RT HAN

MAKING BELT SPLICE, PULLING BELT BACK TOGETHER WITH COME-A-LONG. EE ATTEMPTED TO CROSS THE BELT CAUSING THE BELT BLOCK TO BREAK AT THE CHAIN CONNECTION. THIS ACTION FLIPPED HIM IN THE AIR LAND ING MAOUNG. THE BELT STRUCTURE. THE SOCKET OF THE KNEE JOINT.

CUTTING BELT WITH KNIFE WHEN IT SLIPPED CUTTING LEG RESULTIN IN LACERATION REQUIRING STITCHES.

SHOVELING ALONG BELT LINE WHEN SHOVEL BECAME CAUGHT IN BELT CAUSING RIGHT HAND TO STRIKE NEAR BY BRIDGE BOARD THIS CAUSED SWELLING OF HAND.

AS THE EMPLOYEE WAS CUTTING A BELT TO BE SPLICED ,THE FOLLOW THROUGH OF THE UTILITY KNIFE CUT HIS LEFT CALF CAUSING A LACERATION REQUIRING SUTURES.

CUTTING PIECE OF BELT,KNIFE WENT THROUGH BELT AND CUT LEG.

WAS WORKING ONMANTRIP WHEN WRENCH SLIPPED & HE HIT THUMB.

WAS PUTTING A JEEP BACK ON THE TRACK WHEN THE JACK FLEW OUT STRIKING EMPLOYEE ON THE HAND CUTTING HIS FINGER.

EMPL REMOVING LID OF PLASTIC SEALANT BUCKET USING UTILITY KNIFE.KNIFE SLIPPED AND EMPL CUT HIS LEG REQ 6 SUTURES.

PIECE OF DRIED MANDOSEAL CHIPPED OFF EMPLOYEE'S CHANNEL LOCKS GOING INTO HIS EYE. EYE WAS FLUSHED OUT BY E.R. DOCTOR. EMPLOYEE WAS ON 1 DAY RESTRICTED DUTY.

EE WAS TIGHTENING A TRUSS BOLT WITH HYDRAULIC WRENCH. THE SOCKET FLEW OFF STRIKING EE IN FOREHEAD REQUIRING SUTURES.

WAS CUTTING A PIECE OF TOLLEY GUARDING THAT WAS LINING ON HIS LEG AND KNIFE WENT THOUGH AND CUT LEG IT TOOK 4 STITCHES.

KTIGHTENING BOLT ON BATTERY CAR WHEN BOLT BROKE LETTING FINGER HIT COVER CAUSING IT TO BE CUT.

WHILE USING KNIFE TO CUT OPEN INSULATION ON ELECTRICAL CABLE THE EMPLOYEE LACERATED HIS FINGER REQUIRING SUTURES.

EMPLOYEE WAS PRYING UP TO ATTACH CHAIN,RAIL SPRANG TOWARD HIM HITTING HAND RESULTING IN A FRACTURE OF THE 5TH METACARPAL OF THE RIGHT HAND.

USING GREASE GUN,EMPL PLACED GREASE GUN AGAINST HIS RIBCAGE USED BOTH HANDS TO PULL IN HANDLE AND PRESSURE FX ONE RIB.

EMPLOYEE WAS USING GREASE GUN TO LUBRICAT E ROOF BOLT ER & WHILE SQUEEZING GREASE GUN HANDLE HE FELT A STRAIN IN HIS BACK MUSCLES

EMPL HELPING SPLIT HEADER BOARD-FINGERS CAUGHT BENEATH BOARD RESULTING IN FX OF FINGERS 3,4 & 5 OF LEFT HAND.

WHILE USING A HANDSAW THE BLADE WAS PULLED ACROSS THE EMPLOYEE'S HAND CAUSING A LACERATION.

EMPLOYEE TIGHTENED NUT WITH WRENCH WHENIT SLIPPED EMPLOYEE FELL BACKWARD AND WRENCH FLEW UP AND STRUCK HIS HEAD.

WHILE TIGHTENING TRITITE BOLTS A MINER HEAD THE WRENCH SLIPPED CAUSING EMPLOYEE TO FALL TO THE GROUND AND INJURE HIS ABCK..

MAN WAS LYING FACE UP UNDER A FEEDER BREAKER TIGHTENING A BOLT, HIS WRENCH SLIPPED OFF THE BOLT AND HIT HIM IN THE MOUTH-BREAKING OFF HIS TWO FRONT TEETH.

HITTING ROCK DU8T HOSE WITH HAMMER TO CLEAR A PLUG WHEN HE STRUCK THE HOSE COUPLXX THE HOSE UNCOUPLED AND ONE END FLEW UP AND STRUCK HIS FACE

WHILE SHOVELING3ALONG BELTWAY EMPLOYEE STRUCK HIS HEAD AGAINST A STEEL CROSSBAR. ON APRIL 258198 BEGAN MISSING WORK AFTER DOCTOR DIAGNOSED A DAMAGED CERVICAL DISC.

EMPLOYEE WAS PR2ING WITH A LARGE PRYBAR AND STRAINED HIS GROIN.

CUTTING LUMBER 4ITH HANDSAW AND CUT THUMB REQUIRING STITCHES

EMPLOYEE WAS CU7TING BELT WITH KNIFE WHEN HE SLIPPED AND STUCK THE KNIFE BLADE IN HIS LEG.

PRYING CLUTCH COVER OFF CM WHEN COVER SLIPPED AND EMPL FINGER STRUCK BY SHARP CORNER OF COVER.

CUTTING 6/3 S/C CABLE WITH KNIFE KNIFE SLIPPED CUTTING PALM OF LEFT HAND.

EMPLOYEE WAS USING A SCREWDRIVER TO FORCE A RUBBER GASKET INTO PLACE ON T HE METHANOMETER FOR A CONUINUOUS MINER. THE SCREWDRIVER SLIPPED AND STRUCK THE PERSON IN THE EYE.

HOISTING A PRIMARY EJECTOR WITH A CHAIN HOIST WHEN THE OBJECT TURNED THE EMPLOYEE WAS STRUCK BY A PROTRUDING OBJECT.

EMPLOYEE TIGHTENING BOLT ON COLLAR PIPE WITH SPUD WRENCH-WRENCH SLIPPED, STRUCK EMPLOYEE IN CHIN CAUSING 1"-11/2" LACERATION. REQUIRED SUTURES.

CRAIG WAS DIGGING A HOLE WHEN A FELLW WORKER ACCIDENTLY HIT HIM IN THE RT HAND WITH A DUTCH HEAD CAUSING A PUNCTURE THAT TOOK 7 STITCHES

THE EMPLOYEE WERE REPAIRING SLAMDOOR. ONE WAS HOLD WOOD WHILE THE OTHER DROVE NAILS WOOD WHILE OTHER DROVE NAILS WITH A HAMMER. A PIECE OF METAL FLEW INTO ONE EMPLOYEE EYE HE WAS NOT WEAARING WEARING SAIFETY GLASSES