Buscar en el registro

INJURED WAS REMOVING A BEARING ON A STAMLER FEEDER/BREAKER USING A SLEDGE HAMMER. DURING A DOWN STROKE THE HAMMER HEAD FLEW OFF. DURING THE RESULANT DOWN STROKE, INJURED STRUCK THE BACK OF HIS RIGHT HAND AGAINST THE SIDE OF THE STAMLER, LACERATING THE HAND.

EE WAS TIGHTENING A HOSE CLAMP WITH A SCREQDRIVER WHEN THE SCREWDRIVER SLIPPED AND THE EE STRUCK HIS FINGER AGAINST THE HOSE CLAMP.

EMPLOYEE WAS KNOCKING OUT A BLOCK WALL WHEN A PIECE OF RIB FELL STRIKING EMPLOYEE ON THE SHOULDER.

EMPLOYEE CLAIMED AS HE WAS TIGHTENING BOLTS ON A JEEP WHEEL THE RATCHET SLIPPED AND HE FELT PAIN IN HIS BACK. (NO DOCTOR UNTIL 8-30-93)

EMPLOYEE WAS BREAKING ROCK WITH SLEDGE HAMMER WHEN HE CAUGHT HIS FINGER BETWEEN HAMMER & ROCK.

EE WAS BREAKING A PIECE OF ROCK IN A CHUTE AT A BELTHEAD WHEN A PIECE OF THE BOCK SLID OUT OF THE CHUTE STRIKING HIS RIGHT FOOT.

EMPLOYEE WAS CUTTING THE ROOF BOLTER CABLE IN ORDER TO MAKE A SPLICE WHEN HE CUT HIS LEFT THUMB WITH A UTILITY KNIFE.

EMPLOYEE WAS PULLING A PIECE OF BELT WITH A PAIR OF PLIARS WHEN THEY SLIPPED CAUSING HIM TO FALL ONTO HIS BACK.

EMPLOYEE STATES HE WAS USING A SLEDGE HAMMER, POUNDING HOUSING AND WEAR PLATE ON 28X0 PUMP, WHEN HIS LEFT ELBOW BEGAN HURTING.

EMPLOYEE WAS PULLING DOWN ON A PIPE WRENCH WHEN HE REFLT PAIN IN HIS LOWER BACK

EMPLOYEE WAS USING A SLEDGE HAMMER TO KNOCK OUT BLOCK STOPPING WHEN A BLOCK FELL STRIKING HIS LEFT HAND

EE WAS REMOVING A PIECE OF ROCK FROM A CHUTE AT A BELTHEAD WHEN HE CAUGHT HIS FINGER BETWEEN THE ROCK AND THE SIDE OF THE CHUTE.

TIEING BACK NUT OF REBAR. SLIDING REBAR WHO PLACE AND PIECE OF METAL WENT INTO RIGHT EYE.

42957 A SLEDGEHAMMER TO KNOCK OUT A BLOCK STOPPING AND FELT PAIN IN LOWER BACK.

54736YEE WAS CUTTING A PIECE OF CONVEYOR BELT WITH A UTILITY KNIFE WHEN T HE KNIFE SLIPPED CUTTING HIS LEG

EMPLOYEE WAS JACKING A JEEP ON TRACK CAUGHT FINGER BETWEEN RAIL & BAR FX FINGER

EMPLOYEE STATED HE WAS TRAINING A CONVEYOR BELT. AS HE SWUNG A SLEDGEHAMMER TO STRAIGHTEN A ROLLER, HIS LITTLE FINGER BECAME CAUGHT BETWEEN THE SLEDGE HAMMER HANDLE AND THE NUT ON A SENTINEL R OLLER SWITCH.

EMPLOYEE REACHED UNDER PAN LINE WITH HOE FELT PAIN IN SHOULDER.NOTE-EMPLOYEE DID NOT SEEK MD ATTENTION UNTIL 05-18-92.

EMPLOYEE WAS PRYING ON A GEAR BOX WITH A PRYBAR IN EFFORTS TO REMOVE THE GEAR BOX FROM THE LONGWALL TAIL, THE PRYBAR SLIPPED AND THE INJURED FELL FORWARD STRIKING HIS SHIN AGAINST THE TAIL FRA ME.

GOT STRUCK WITH SLATE BAR

EMPLOYEE WAS USING A SLATE BAR TO PRY UP A SWING CHUTE FOR A CMI DRYER.THE BAR SLIPPED CAUSING HIM TO FALL FORWARD.

EMPLOYEE WAS PULLING ON A WRENCH AND FELT PAIN IN BACK.

EMPLOYEE WAS CUTTING TAPE OFF MOTOR LEAD, CUT HIS FINGER.

EE WAS SHOVELING AROUND A BELTTAIL AND AS HE TURNED TO THROW A SHOVEL LOAD ONTO THE BELT HIS FOOT STUCK IN THE MUD AND HE TWISTED HIS LEFT ANKLE.

EMPLOYEE WAS LOOSENING A BOLT OVER HEAD & AS HE PULLED DOWN ON THE WRENCH HE FELT A PAIN IN HIS LEFT SHOULDER

JACKING JEEP ON TRACK-FELT PAIN IN BACK.

EMPLOYEE STRUCK HIS FINGER WITH A HAMMER.

EMPLOYEE DID NOT SEEK MEDICAL ATTENTION UNTIL 3-17-92 RESULTING IN LOST TIME. EMPLOYEE WAS HITING CHUTE WITH HAMMER WHEN HAMMER SLIPPED, STRIKING LEFT HAND.

EMPLOYEE WAS MOVING A TAILPIECE ON A SHIELD CAR WITH A SLATE BAR FELT PAIN IN RT WRIST

EMPLOYEE WAS MOVING ROLLS OF BELT WITH SLATE BAR

FRACTURE RIGHT FINGER.EMPLOYEE WAS REMOVING BOLTS WRENCH SLIPPED STRIKING HIS FINGER.

USING HAMMER TO REPAIR CHAIN SWUNG HAMMER CAUGHT FINGER BETWEEN HANDLE AND CHAIN

EMPL WAS REMOVING PERSONNEL SHIELD FROM TUNNEL LINER ARCH. HE HIT SHIELD WITH HAMMER & IT DROPPED STRIKING LEFT KNEE.

EE WAS TIGHTENING A BOLT WITH A WRENCH WHEN HE FELT A APIN IN HIS RIGHT SHOULDER.

MAN WAS USING A BAR TO PRY OVER A LATCH ON A TRACK SWITCH AND FELT BURNING SENSATION IN HIS RT. ARM.

MOVING RAIL WITH BAR LIFTED IT HURT SHOULDER

INSTALLING BUCKETS CUT ARM ON SIDE OF ?

MAN WAS USING A WRENCHA DN CHEATER PIPE TO REMOVE A BOLT. WHEN HE PULLED ON PIPE THE WRENCH SLIPPED THE PIPE STRUCK HIS LEFT SHOULDER.

EMPLOYEE WAS TAKING ROLLERS OFF OF CARRIAGE WHEN THE TUGIT SLIPPED PINCHING HIS FINGER.

EMPLOYEE WAS PULLING BROKEN BELT TOGETHER WITH ROPE HOIST WHEN IT SLIPPED CAUSING HANDLE TO STRIKE HIM ON RT LEG

EMPLOYEE WAS USING A SLEDGE HAMMER TO REMOVE A BROKEN PAST.AS HE SWUNG THE HAMMER IT GLANCED OFF A CABLE AND STRUCK HIM ON THE HEAD.

CRIBBING WHEN CRIB BLOCK SLIPPED R MIDDLE FINGERNAIL BENT BACK

EMPL USING WRENCH TO TIGHTEN BELT TAKE-UP TAILROLLER.FELT PAIN IN ABDOMEN AREA.

EMPLOYEE STATES HE WAS SHOVELING SPILLAGE AT NO 10 BELT WHEN HE SAW A LIGHT HE TURNED HIS HEAD TO SEE WHEN HE TURNED BACK AROUND HE HIT HIS LERT ELBOW ON BELT ROLLER

STANDING ONE FOOT IN PITCH ONE FOOT ON TOOP OF GROUND SWUNG PICK AND HIT BURIED PC OF STEEL FELT PAIN IN LOWER BACK

EMPLOYEE WAS IN A BENT OVER POSITION OBSERVING A COWORKER WHO WAS USING A HAMMER TO DISCONNECT THE HYDRAULIC TRUNK LINE THAT OPERATES THE LONGWALL A FRAGMENT OF METAL BECAME AIRBOURNE STRIKING THE EMPLOYEE ON THE CHIN NOTE THIS INJURY WAS REPORTED TO MANAGEMENT ON 05-01-91

REMOVING BELT JACK CAUGHT THUMB BETWEEN JACK LATCH AND JACK

EMPLOYEE WAS IN THE UNDERGROUND SHOP WORKING IN THE MOTOR PIT. HE REACHED WITH A PRY BAR TO STRAIGHTEN A CLEVIS AND FELT PAIN IN RIGHT SHOULDER.

EMPLOYEE WAS SPLICING CABLE WHEN KNIFE SLIPPED OFF CABLE AND CUT FINGER.

EMPLOYEE WAS LOOSENING THE BOLTS ON A STRUT WHICH WAS BETWEEN TWO STEEL LEGS, WHEN THE STRUT SUDDENLY POPPED LOOSE STRIKING THE EMPLOYEE IN THE FACE.