Buscar en el registro

MEDICAL REPORTABLE, THE BOLT HOLDING THE CHAIN TO THE PLATE BROKE, SHAIN SNAPPED BACK STRIKING HIS LEFT INDEX FINGER.

TWO EE WERE SHOVELING AT A COAL SPILL. ONE BENT DOWN AS THE OTHER WAS THROWING SHOVEL FULL OF COAL ONTO BELT AND WAS STRUCK AT LOWER LIP AREA WITH SHOVEL.

KNIFE SLIPPED AND JABBED EMPLOYEE IN THE RIGHT THIGH WHILE CUTTING BELT.

STRIPPING INSULATION FROM 14/3 DOUBLE JACKET CABLE WHEN THE KNIFE SLIPPED CAUSING A CUT ON HIS LEFT FOREFINGER.

WHILE PACKING A 13HP FLIGHT PUMP WITH A BAR THE PUMP SLID DOWN ON THE BAR CAUSING THE WEIGHT TO SHIFT.

RESTRICTED DUTY: EE WAS JACKING UP TAIL PIECE, THE JACK STARTED TO SLIP, THE HANDLE OF THE HANDYMAN STRUCK HIS SAFETY GLASSES & RIGHT CHECK IN THE TEMPLE AREA.

WORKING ON PANLINE, HAD SCREWDRIVE IN A COMEALONG TO HOLD IN PLACE. SCREWDRIVE BROKE AND COMEALONG CAME DOWN ON LEFT HAND.

EE WAS USING HIS SLIVER BAR TO REDUCE THE TENSION ON THE SUPPORT CABLE IN ORDER TO REMOVE THE CONNECTION PIN. THE BAR SLIPPED AND MASHED HIS THUMB.

EMPLOYEE STATES THAT THE STEARING JACK WAS TIGHT, HE LOOSENED IT AND IT SWUNG OVER AND HIT HIS EYE. LACERATION REQUIRING STITCHES.

EE STATES THAT WHILE CUTTING SKIRTING HIS KNIFE SLIPPED AND CUT THE TOP OF HIS LEFT THUMB, REQUIRING 30 STITCHES.

WHILE USING A COME ALONG HOOKED TO CHAIN PULLING FACING CONVEYOR CHAIN BROKE STRIKING EE IN LEG SHIN.

EE STATES THAT WHILE PRYING A TIRE RIM THE BAR SLIPPED AND RAN HIS RIGHT SHOULDER INTO A JACK HANGING OFF THE ROOF BOLTER PLATFORM. WAS NOT REPORTED TO MGMT. UNTI 12-22-95. SURGERY ON 3-26-96 CHANGE THIS FROM AN INCIDENT ONLY, MEDICAL TREATMENT TO MSHA REPORTABLE.

EMPLOYEE STATES HE WAS BREAKING A ROCK WITH A DOUBLE JACK & A ROOF BOLT THAT WAS IN THE ROCK SPUN AROUND & CUT HIS FINGER LACERATION REQUIRING STITCHES TO THE 2ND DIGIT ON RT HAND

EMPLOYEE STATES HE CUT HS RT KNEE REQUIRING 4 STITCHES WITH A RAZOR KNIFE WHILE CUTTING BELT

EMPLOYEE STATES HE HIT HIS THUMB WITH A HAMMER WHILE PUTTING IN A BELT SPLICE.

EMPLOYEE STATES HE WAS BREAKING BLOCK OUT OF A STOPPING WITH A SLEDGE HAMMER A PIECE BROKE OFF STRIKING HIM IN THE RT EYE NO SAFETY GLASSES WERE WORN

EMPLOYEE STATES HE WAS JACKING 4" PIPE UP WITH SIMPLEX TO LET DOWN. KNOCKED JACK OUT WITH SLED GE HAMMER, PIPE FELL AND HAMMER STRUCK EMPLOYEE IN GROIN.

EMPLOYEE STATES HE WAS PLACING COVERS ON PANLINE AND SMASHED FINGER. ANOTHER EE ACCIDENTLY STRUCK FINGER WITH HAMMER.

EMPLOYEE STATES THAT A PIECE OF COAL CAUGHT BETWEEN #6 MAINLINE HEAD ROLLER AND THE ROOF. WHEN IT DISLODGED IT HIT HIM IN THE FACE.

WHILE USING A HAMMER TO REMOVE A ROLL PINM, THE ROLL PIN BROKE AND STRUCK HIM IN THE CHIN CAUSING A LACERATION.

EMPLOYEE STATES WHILE HAMMERING A BIT INTO BIT BLOCK, A PIECE OF HAMMER BROKE OFF STRIKING HIM IN CHEEK AND EMBEDDING UNDER SKIN.

CHANGING WHEEL BEARING

EMPLOYEE STATES HE WAS SWINGING A SLEDGEHAMMER WHEN HE FELT HIS BACK GO OUT

AS THE EE HIT A TRACK IDLER WITH A HAMMER SOMETHING STRUCK HIS LEG.

THE EMPLOYEE CUT A BAND ON A ROLL OF #9 WIRE. SOEMTHING FLEW INTO HER EYE.

EMPL TIGHTENING BOLTS,RATCHET SLIPPED AND HIT IN MOUTH CHIPPING TOOTH.THIS INJURY NOT REPORTED UNTIL 12-17-90 TO SAFETY DEPT.

EMPLOYEE WAS LOOSENING A BOLT ON PANLINE. THE RATCHET CAME UP AND HIT EMPLOYEE IN THE MOUTH BREAKING BRIDGE AND PERMANENT TOOTH.

EMPLOYEE AND FOREMAN WERE UNLOADING BELT FROM MOW-BOY TRAILER WHEN COME-A-LONG HANDLE FILPPED AROUND AND HIT EMPLOYEE ON SIDE OF HEAD.

BAR SLIPPED AND PINCHED FINGER BETWEEN BAR AND CLUSTER FRAME.

EMPLOYEE STATED HE WAS PRYING ON VALVE TO DISLODGE HOSE.THE VALVE FELL,STRIKING EMPLOYEE IN THE MOUTH.

THE INJURED WORKER WAS INSTALLING A BRATTICE CURTAIN IN THE FACE BESIDE WHERE THE ROOF BOLTER WAS WORKING AS HE WAS SPADDING THE CURTAIN HE STRUCK HIS HAND BETWEEN THE ROOF BOLTER AND THE SPAD GUN

FOREMAN STATED THAT WHILE EMPLOYEE WAS TIGHTENING A BOLT,THE WRENCH SLIPPED OFF CAUSING HIM TO LOSE HIS BALANCE AND TWIST RIGHT ANKLE.

THE HOOK ON A C2ME-ALONG SLIPPED ALONG A PIECE OF PLATE STRIKING EMPLOYEE ON THE THUMB.

THE EMP HIT HI8 RT HAND BETWEEN A SCALING BAR AND A METAL RAIL WHILE CLEANING CHUTES IN THE T IPPLE

EMPLOYEE WAS US3NG A KNIFE TO BORE A HOLE IN PLEXI GLASS THE KNIFE FOLDED CLOSED ON HIS FINGER EITHER BY DROPPING THE KNIFE OR PRESSURE ON THE KNIFE

THE EMPLOYEE WA8 STANDING BY ANOTHER EMPLOYEE USING A HAMMER WHEN A SMALL PIECE OF METAL FLEW INTO HIS RIGHT EYE.