Buscar en el registro

A DRILL ROD BECAME STUCK IN A DRILL HOLE. EE WASMOVING THE PIPE WRENCH CONNECTED TO A HYDRAULIC CYLINDER WHILE ANOTHER EE WAS WORKING THE CYLINDER LEVER. EE PLACED HIS LEFT HAND RING FINGER BETWEEN THE WRENCH & THE CYLINDER & PINCHED THE END OF HIS FINGER

HE WAS PUTTING A TOOTH ON A 992C BUCKET WHEN HE TAPPED THE TOOTH WITH A HAMMER A PIECE OF THE TOOTH BROKE OFF HITTING HIM ON THE END OF THE NOSE.

TAKING OFF THE BALL JOINTS ON A FORD PICK-UP TRUCK, HAMMER SLIPPED OFF OF PUNCH HITTING HIS LEFT HAND INDEX FINGER,FRACTURING IT.

HE HAD A DOZER TRACK LINK BLOCKED UP WITH A METAL JACK STAND AND WAS GOING TO RAISE THE LINK UP WITH AN ELECTRIC CABLE BOOM HOIST. THE CHAIN CONNECTED TO THE LINK, SLIPPED OFF WHILE HE WAS RAI SING THE JACK STAND. THE LINK FELL ON HIS RING FINGER OF LEFT HAND.

WHILE CHANGING OIL ON A PICK UP TRUCK, THE WRENCH SLIPPED OFF THE DRAIN PLUG. HIS HAND HIT THE UNDERSIDE OF THE PICKUP TRUCK BREAKING HIS RIGHT THUMB.

HE WAS REMOVING AN AXLE ON A 992-C CAT LOADER. WHILE POUNDING THE AXLE OUT THE WHEEL HOUSING ON THE 992-C LOADER WITH A HAMMER, THE HAMMER HANDLE HIT THE WHEEL RIM. THE HAMMER HANDLE STRUCK HI S RIGHT HAND INDEX FINGER AGAINST THE WHEEL HOUSING.

REMOVING A METAL JACK STAND FROM UNDER A TRUCK HE CAUGHT THE SLEEVE OF HIS COVER-ALLS ON THE HEIGHT ADJUSTMENT PIN. THE STAND CAME DOWN ON HIS RIGHT HAND INDEX FINGER.

REPAIRING A TRACK LINK ON A D-9H CATERPILLAR DOZR. HEW AS PRYING UP THE TRACK LINK WITH A METAL BAR. THE LINK SLIPPED OFF THE BAR FALLING ON HIS FINGER.

WHILE TIGHTENING LUG NUTS ON LEFT REAR WHEEL OF HIS PICKUP TRUCK, THE RATCHET SLIPPED, CAUSING HIS HEAD TO JERK FORWARD AND HIT WHEEL WELL, CUTTING HIS UPPER CHEEK. HE RECEIVED 8 STITCHES.

HE WAS USING A METAL PRY BAR TO PRY UP A TRACK ROLLER FROM THE FROZEN GROUND. AS HE WAS LIFTINGTHE BAR, HE FELT A SHARP PAIN IN HIS LOWER BACK.

WHILE MOVING AUGERS, CABLE BROKE. AUGER FELL AND BENT STEEL TOE IN BOOT FRACTURING LEFT BIG TOE.

WHILE RESOCKETING THE DRAG CABLE, HE WAS HOLDINGA BAR TO KEEP THE CABLE IN LINE WITH GROOVES. WHEN THE CABLE TIGHTENED, IT PULLED HIM OVER HITTING HIS KNEE ON THE EDGE OF THE TROFT.

WHILE REPLACING TEETH IN A 992-C CATERPILLAR LOADER BUCKET, A SLIVER OF METAL FROM THE SLEDGE HAMMER BROKE OFF AND BECAME EMBEDDED IN HIS RIGHT THUMB.

HE WAS HOLDING THE DRILL BIT WRENCH AND SET THE WRENCH AGAINST THE DRILL FRAME TO HOLD IT, WHILE TURNING THE BIT, WHEN PRESSURE WAS APPLIED, THE WRENCH SLIPPED UNDER THE FRAME, STRIKING HIS RI GHT HAND RING, LACERATING AND BREAKING IT.

HE WAS STANDING ON THE GROUND PRYING A ROCK WEDGED IN THE BREAKER THROUGH A SIDE HOLE WITH A PRY BAR AND FELT PAIN IN HIS LEFT SIDE OF HIS NECK.

HE WAS REMOVING MOUNTING BOLT ON AT D9L DOZER USING ONE INCH RACHET WITH PIPE ATTACHED HE HAD ONE FOOT ON TRACK FRAME & ONE FOOT ON PUSH ARM & FELT PAIN IN RIGHT LOWER BACK AS HE PULLED UP ON RACHET.

HE WAS TIGHTENING THE NUT ON A U-BOLT ON A DRILL TRUCK FILTER HOUSING IN A BENCH VICE USING A RATCHET WITH A PIPE EXTENSION FOR LEVERAGE.THE HOUSING LOOSENED IN THE VICE ALLOWING HIM TO SLIP C RUSHING HIS FINGER BETWEEN THE BENCH AND PIPE EXTENSION.FRACTURING AND LACERATING HIS LEFT HAND MIDDLE FINGER.

WHILE WORKING ON HOIST, A PIECE OF RUST FLEW INTO HIS RIGHT EYE. COULD NOT WASH IT OUT SO HE WENT TO HOSPITAL 2 DAYS LATER TO HAVE REMOVED.

HE WAS HOLDING A HAMMER WHILE A MECHANIC STRUCK IT WITH ANOTHER HAMMER CAUSING A STEEL FRAGMENT TO IMPALE INTO HIS RIGHT HAND INDEX FINGER. THE FRAGMENT BROKE FROM THE HAMMER HE WAS HOLDING.

HE WAS INSTALLING A ENGINE GUARD PAN UNDERNEATH A D-3 CAT. DOZER USING A RACHET WRENCH AND THE RACHET WRENCH SLIPPED AND S TRUCK HIS LEFT TOP INCISOR AND LOWER LEFT LIP.

I NAME WAS WORK3NG WITH THE SUPPLY MAN ON THE BACK BED OF A ROCK TRUCK. THE SUPPLY MAN WAS TURNING BOLTS WITH A WRENCH AND HE WAS BEHIND HIM READY TO START WELDING. AS THE SUPPLY MAN WAS FINI SHING TIGHTENIN1 THE BOLTS THE WRENCH SLIPPED CAUSING HIM TO LOSE HIS BALANCE AND AS THIS OCCURED THE WRENCH STRUCK HIM ABOVE THE LEFT EYE.