Esta búsqueda
Envíame un correo cuando un nuevo incidente coincida con estos filtros. Un correo de confirmación; cancela la suscripción cuando quieras.
CLEANING CONDITIONER TANK 50 AS TO FREE UP THE MIXER BLADES REACH IN AT MIXER BLADES AND CUT TENDON TO TWO FINGERS ON RIGHT HAND.
EE WAS REPAIRING A HYDRAULIC HOSE ON TRUCK #514. WHILE PULLING ON A PIPE WRENCH, EE INJURED HIS RIGHT HAND BETWEEN THE LITTLE FINGER AND THE RING FINGER.
EE WAS REPAIRING EQUIPMENT ON 455 DEMAG. WHILE USING A HAND TOOL, THE TOOL SLIPPED CAUSING THE EE TO STRIKE HIS RIGHT HAND AGAINST AN UNKNOWN PART OF THE MACHINE.
EE WAS REPAIRING THE STEERING PUMP ON TRUCK #804. EE'S WRENCH SLIPPED FROM THE NUT, CAUSING HIM TO FALL BACKWARDS. EE LANDED ONTO A ROCK, INJURING HIS BACK. HE DID NOT SEEK MEDICAL CARE UNTIL 10/12/99.
EE WAS POSITIONING A PIPE WRENCH INTO PLACE TO REMOVE A BROKEN DRILL BIT FROM A ROTARY DRILL WHEN THE WRENCH SLIPPED AND FELL ONTO HIS LEFT HAND, LACERATING HIS FIRST FINGER.
EE WAS CLEANING THE FLOOR AS PART OF HIS DUTIES WHEN HE STRUCK HIS BACK AGAINST A COAL CHUTE.
EE WAS REPAIRING A HUB BEARING ON A WHEEL ROTOR. THE EE STRUCK HIS LEFT THUMB WITH A 32 OZ. HAMMER WHILE ATTEMPTING TO REPAIR THE BEARING.
EE WAS REMOVING A LARGE ROCK THAT HAD BECOME STUCK IN THE CHUTE BELOW THE PICKING TABLE IN THE HEAD HOUSE. WHEN THE EE WAS SECURING THE CHAIN TO LIFT THE ROCK OUT, THE EE CAUGHT HIS LEFT HAND BETWEEN THE CHAIN AND THE ROCK.
EE WAS ASSISTING WITH THE ASSEMBLY OF A D11 DOZER. WHILE PULLING ON A STEEL BAR ASSISTING IN REMOVING A STEEL PLATE FROM THE UNDERSIDE EE STRAINED HIS LOWER BACK.
EE WAS HOLDING A NUT IN POSITION TO SECURE A WOODEN PLANK TO A STEEL BEAM UNDER THE RAW COAL HOPPER. EE INDEX FINGER WAS CAUGHT BETWEEN THE STEEL BEAM AND THE BOLT BEING TURNED INTO THE NUT, C AUSING THE FINGER TO BE TORN, LACERATED BY THE BOLT.
EMPLOYEE WAS REPAIRING A VALVE ASSEMBLY AS PART OF HISNORMAL DUTIES. WHEN EMPLOYEE WAS PULLING ON A WRENCH TO TIGHTEN A NUT, HE CAUGHT HIS THUMB BETWEEN THE WRENCH AND THE VALVE ASSEMBLY.
WHILE EE WAS PULLLING AND PUSHING A STEEL BAR TO REMOVE SOME BLOCKED MATERIAL FROM A CHUTE, THE BAR SLIPPED, CAUSING HIM TO STRAIN HIS LOWER BACK.
EE WAS REPAIRING A ROLL CRUSHER. WHILE ATTEMPTING TO ROLL A PLATE WITH A STEEL BAR, THE BAR SLIPPED FROM IT'S POSITION CAUSING THE EE TO LOOSE HIS BALANCE & FALL TO THE GROUND APPROX 9'. NO FALL PROTECTION WAS USED.
EMPLOYEE WS TIGHTENING A UNION CONNECTION ON A WATER SPRAY PIPE WITH A PIPE WRENCH WHEN THE WRENCH SLIPPED, CAUSING THE EMPLOYEE OT HYPEREXTEND HIS LEFT ARM, STRAINING HIS LEFT ELBOW.
DURING NORMAL REPAIRS, THE EMPLOYEE WAS TIGHTENING A BOLT WITH A RATCHET WRENCH WHEN THE WRENCH SLIPPED OFF THE BOLT. THE EMPLOYEE STRUCK AGAINST AN ANGLE IRON, CAUSING AN AVULSION TO HIS RIGH T RING FINGER.
EE WAS REPAIRING A HAND PUMP. THE PUMP SLIPPED FROM THE VICE & FELL TO THE GROUND, STIKING THE EE ON THE LEFT FOOT.
DURING REPAIRS TO THE RIPPLE-FLOW VIBRATOR, THE EE WAS STRUCK IN THE RT EYE WITH SOME FOREIGN MATERIAL WHEN THE WRENCH HE WAS WORKING WITH FELL TO THE FLOOR, CHIPPING DEBRIS INTO THE AIR.
EMPLOYEE WAS CLEANING THE TOP OF A SUMP OFF WITH A SCRAPER WHEN HE FELT A PAIN IN HIS LOWER BACK
EMPLOYEE WAS CHANGING OIL IN THE RIPPLE FLOW VIBRATOR WHEN HE PUSHED ON THE WRENCH TO OPEN THE PLUG THE WRENCH SLIPPED OFF THE PLUG CAUSING HIS HAND TO STRIKE AGAINST THE MACHINE
EMPLOYEE WAS TIGHTENING BOLTS ON THE EGG COAL SHAKER WHILE PULLING ON A WRENCH EMPLOYEE FELT PAIN IN HIS UPPER BACK AREA
WHILE SWINGING A HEAVY SLEDGE HAMMER DURING REPAIRS, EE STRAINED RT. FOREARM/ELBOW. HE REINJURED SAME THE FOLLOWING DAY CLOSING A VALVE.
EMPLOYEE WAS PULLING AS WRENCH TO REPAIR A PUMP WHEN HE FELT PAIN IN HIS LEFT NECK AREA.
WHILE EE WAS REPAIRING A HYDRAULIC HOSE ON A DUMP TRUCK THE WRENCH SLIPPED PINCHING THE EE'S FINGER.
EMPLOYEE WAS USING A 4' PRY BAR TO POSITION A TRACK ON A D-8 BULLDOZER WHEN THE BAR SLIPPED STRIKING HIM ON THE LEFT FOOT.
EMPLOYEE WAS LIFTING AND REPLACING GUARD ON CRUSHER USING AN OVERHEAD CHAIN. EMPLOYEE FELT PAIN IN NECK.
EMPLOYEE WAS USING A COME-A-LONG TO APPLY PRESSURE IN UNDTER TO STRAIGHTEN RAILING ON FUEL RACK, BECAUSED OF PRESSURE ON THE RAILING, IT LET LOOSE STRIKING EMPLOYEE ON HEAD.
EMPLOYEE WAS APPLYING PRESSURE TO 15 TON JACK, JACK SLIPPED UNDER PRESSURE AND STRUCK EMPLOYEE ON HEAD.
42957 PRY BAR EXERTED EXTRA PRESSURE ON BAR IT SLIPPED INJ TO BACK
REMOVING TIRE FROM TRUCK TIRE FLEW OFF STRUCK L HAND
EMPLOYEE WAS REMOVING BRAKE PADS FROM HOIST DRUM USING BRAKE PAD TOOL, WHEN BRAKE PAD CAME LOOSE HIS ELBOW STRUCK AGAINST HOIST DRUM.
STANDING ON AXLE FELT PAIN IN NECK AND SHOULDER WHILE TIGHTENING BOLTS
EMPL WAS TIGHTENING SPRING PINS ON TRUCK WHEN WRENCH SLIPPED & EMPL PINCHED L HAND.
WHILE OBSERVING MECHANIC CHANGING OUT MAXI BRAKE ON G/D 120 DRILL THE INJURED EMPLOYEE WAS STANDING IN DOORWAY.WHERE HE COULD GOG THE LIMIT SWITCH.WHILE THE MECHANIC WAS WORKING A PIECE FROM T HE MAXI BRAKE SYSTEM WENT THROUGH THE AIR AND STRUCK INJURED ON BRIDGE OF HIS NOSE,FOREHEAD AND FACE AREA.
WHILE STRAIGHTENING A STEEL BAR WITH A HAMMER AGAINST THE SIDE OF A BENCH VISE, THE BAR TURNED AND CAUGHT THE INJURED'S LEFT LITTLE FINGER.
WHILE REMOVING HEAD HOUSE RAW COAL PUSHER WITH A COME-A-LONG ATTACHED BY A CHAIN TO A 11/2IN WELDED NUT THE WELD ON THE NUT BROKE & STRUCK INJURED ON CHIN
INJURED,A MACHINIST WAS STANDING BELOW THE PICKING TABLE AND WHILE REACHING OVERHEAD TIGHTENING BOLTS FELT PAIN IN BACK OF HIS NECK.
WHILE BREAKING LARGE LUMPS OF COAL WITH A 16# SLEDGE HAMMER FOREIGN BODY ENTERED RIGHT EYE OF INJURED EMPLOYEE. HE WAS WEARING EYE PROTECTION.
PRYING LARGE ROCK TO REMOVE FROM AREA OF ROCK POCKET REQUIRING REPAIR.