Buscar en el registro

Employees were removing lagging from a counterweight pulley and bolting off excess lagging. The belt was secured by clamps, counterweight picked, and system de-energized (i.e. locked out) prior to starting work. A (1) ton come-a-long chain link broke allowing the slack to be taken up quickly in the system. Employee was caught between rollers/pulley & belt

Employees were removing lagging from a counterweight pulley and buffing off excess lagging. The belt was secured by clamps, counterweight picked, and system de-energized (i.e. locked out) prior to starting work. A (1) ton come-along chain link broke allowing the slack to be taken up quickly in the system. Employee was caught between the roller/pulley and belt.

Employee was removing a screen from a clean coal vibrator. He was using a utility knife to cut a portion of the plastic screen when it slipped contacted his small finger of the left hand causing an incision that required 2 sutures to close.

Stated: Employee was assisting mechanic in changing the inside dual on the water truck. He was using a pry bar to lift on the tire and strained his lower back. Diagnosed with low back strain. Placed off work with medication and physical therapy.

Stated: Employee was cutting a dam from a deslime screen with a belt knife. The knife slipped and the blade went into his right forearm. The laceration required sutures to close.

EE was pulling a new replacemet beam for the Coal Vibrator using a come-a-long. The new beam was suspended from the monorail overhead. As he was positioning the beam laterally, the wheels encountered some resistance to rolling. As he manipulated the come-a-long hoist, the resistance was overcome & necessary pressure changed causing EE to twist & hurt shoulder. Missing work 7/14/10.

EE was using a 10' pry bar attempting to remove material in chute. When applying pressure on the bar, material broke up, allowing sudden movement of the bar. EE's thumb was caught between the pry bar and an eyelet that had been welded on the chute, resulting in a small laceration to the right thumb. Laceration required 8 sutures to close.

EE STATED HE WAS ATTEMPTING TO UNSTOP RAW COAL CHUTE WITH A METAL BAR AND SOMETHING HIT THE BARFORCING IT AGAINST HIS RIGHT LOWER LEG, CAUSING A 1" CUT TO HIS SHIN.

EE REPORTED: HE AND COWORKER WERE PULLING A DEEP WELL FROM THE MINE WORKS, WHEN USING A PUMP CHAIN WRENCH TO LOOSEN COUPLINGS, EXPERIENCED PAIN TO HIS LOW BACK. STARTED MISSING SCHEDULED WORK DAYS ON 3/26/03, REPORTED THE ACCIDENT TO HIS SUPERVISOR ON THAT DATE.

EE WAS TRYING TO GET A PIN OUT OF A LONGWALL PAN THAT WAS LEFT ON A SHIELD HAULER. HE SAID THE PIN WAS HARD TO GET TO & WHILE USING A HAMMER TO REMOVE IT, HE STRUCK HIS RIGHT THUMB. HE HAD A CONTUSION & A FINGER SPLINT WAS APPLIED. THE TIP OF HIS THUMB BONE WAS FOUND TO BE FRACTURED BY THE DOCTOR. HE MISSED WORK SATURDAY 12/14/02 BUT RETURNED TO WORK MONDAY, 12/16/02.

EE STATED THAT HE HAD BEEN PULLING HARD ON A RATCHET TO LOOSEN A BOLT AT ABOUT 0330. HE SAID THAT LATER HE BEGAN HAVING PAIN IN HIS ABDOMEN ON THE LEFT SIDE.

WHILE CHANGING A TIRE ON A SHIELD HAULER HE EXPERIENCED A POSSIBLE STRAIN TO HIS LOWER BACK WHENTIGHTENING THE LUG NUTS. CONTINUED TO EXPERIENCEPAIN THE NEXT DAY; WENT FOR MEDICAL TREATMENT.

EE STATED, HE WAS CUTTING TOP OFF PLASTIC BUCKET USING A UTILITY KNIFE AND THE KNIFE SLIPPED CUTTING HIS UPPER RIGHT LEG.

EE STATED: ATTEMPTING TO REMOVE A HYDRAULIC HOSE STAPLE-LOCK USING ONE HAMMER HITTING IT WITH A SECOND HAMMER. WHEN HE STRUCK THE FIRST HAMMER, A SLIVER OF STEEL BROKE OFF EMBEDDING IN HIS HAN D.

EMPLOYEE STATED: WHEN STRIKING A BATTERY LID WITH A 20LB. SLEDGE HAMMER, FELT PAIN TO HIS LEFT SHOULDER. PAIN CONTINUED TO HIS SHOULDER AND ON 7-2-01 WENT FOR MEDICAL TREATMENT, DIAGNOSIS WAS A STRAIN, STARTED MISSING WORK ON 7-2-01.

EE WAS CUTTING A PLASTIC BUCKET WITH UTILITY KNIFE AND HE CUT HIS R LOWER LEG.

EE WAS CUTTING THE BANDS ON A BUNDLE OF ROOF BOLTS WITH A PAIR OF SIDE CUTTERS & WHEN HE TWISTEDTHE CUTTERS HE CUT HIS 2 MIDDLE FINGERS ON HIS RIGHT HAND. REQUIRED SUTURES

EE STATED: CHANGING MINER DRUM BITS, THE HAMMER HE WAS USING GLANCED OFF THE BIT STIRKING HIS RIGHT KNEE.

EE STATED HE WAS CUTTING BELT USING KNIFE AND THE KNIFE SLIPPED AND CUT HIS RIGHT KNEE (3 SUTURES).

EMPLOYEE STATED HE WAS REMOVING TOP OFF ROCKDUSTER. WRENCH SLIPPED OFF BOLT, AND WRENCH HIT HIM IN MOUTH BREAKING TOOTH.

EE WAS INSTALLING A NEW SPROCKET IN THE LONG WALL SHEAR AND WHILE HANDLING THE SPROCKET HE CAUGHT HIS LITTLE FINGER OF THE RIGHT HAND BETWEEN THE SPROCKET AND THE TRAPPING SHOE.

EMPLOYEE STATED, HE WAS PUSHING WITH HIS HAND A METAL HOLDDOWN BAR, AND IT GOT CAUGHT ON A BOLT THE HOLDDOWN STRIP SLIPPED AND CAUGHT HIS LEFT MIDDLE FINGER CUTTING IT.

EMPLOYEE STATED HE WAS HOISTING BUCKET OF MATERIAL FROM GROUND TO PLATFORM ON REFUSE BELT,& BUCKET HUNG ON PIECE OF METAL. AS HE PUSHED CABLE, HIS GLOVE GOT CAUGHT BETWEEN CABLE AND SHEAVE; CAUSED FRACTURE OF L INDEX FINGER DISTAL

EMPLOYEE HAD JUST INSTALLED THE BELT CLAMP TO SPLICE THE BELT, AND WHEN THEY PUSHED THE CLAMP BACK ONE END CAME LOOSE AND THE CLAMP CAUGHT HIS LEFT THUMB, THIS RESULTED IN A CUT TO HIS LEFT THUMB.

EE WAS CLEANING REFLECTORS AND REPLACING POSTS AND REFLECTORS ALONG A HAULAGE ROAD. WHILE USING A POST HOLE DRIVER TO DRIVE THE POSTS, SHE STATED HER THUMB BEGAN TO HURT AND HER BACK HURT. EE HAD SURGERY ON THE THUMB. COMP WAS CHECKING VALIDITY OF SURGERY. THIS REPORT WAS LATE WAITING ON THAT DISPOSITION.

EE WAS INSTALLING A LEG JACK AT #95 SHIELD AND HAD A COME-A-ALONG HOOK IN THE BAR ON THE UPPER CANOPY LINK, THE BAR BROKE, AND THE JACK LEANED FORWARD AND CAUGHT INJURED'S LEFT HAND BETWEEN TH E PRESS MANIFOLD AND LEG JACK.

EMPLOYEE STATED HE WAS SHOVELING OUT COAL FROM INSIDE #5 CMI DRYER WHEN HIS RIGHT HNAD RUBBED AGAINST A PIECE OF STAINLESS STEEL DAM ON TOP OF THE DRYER SCREEN. HE LACERATED HIS RIGHT RINGER F INGER REQUIRING SUTURES.

EE WAS TIGHTENING A LOAD BINDER USING A PIPE. THE PIPE SLIPPED OFF HITTING THE MAN ON THE PALM OF THE LEFT HAND.

EE WAS CUTTING THE 1ST WEST CONVEYOR BELT WHEN THE BELT KNIFE SLIPPED & CUT HIS UPPER LEFT LEG THIS REQ'D 9 SUTURES

EE WAS USING SLEDGE HAMMER TO LOOSEN BUCKET TEETH TO BE REPLACEDON 922G ENDLOADER. A GLANCING BOW WITH SLEDGE HAMMER CAUSED A SLIVER OF METAL FROM OLD TOOTH TO ENTER HIS LEFT FOREARM THE WOUND WAS CLEANED & 4 SUTURES APPLIED

EMPLOYEE STATED THAT HE WAS HELPING INSTALL A WHEEL PLANETARY ON A 160T HAUL TRUCK. HE WAS USINGA 5' PRYBAR TO ALIGN GEARS WITH WHEEL GEAR WHEN HE FELT A PAIN IN HIS GROIN AREA. EMPLOYEE DID N OT SEEK MEDICAL ADVICE UNTIL 08/17/99 AND HE IN FORMED MANAGEMENT AT THAT TIME.

EE WAS CUTTING A PIECE OF CONVEYOR BELT WITH A BELT KNIFE WHEN THE KNIFE SLIPPED HE CUT HIS LEFT LEG JUST ABOVE THE KNEE. THE CUT ABOUT 3" LONG REQUIRED SUTURES.

EE REPORTED HE WAS MOVING A SUCTION PLATE OF AN 8" X 8" GIW PUMP WITH A COM-A-LONG. THE PLATE FELL OVER CATCHING HIS ARM BETWEEN THE COM-A-LONG CHAIN AND THE PUMP BODY.

EMPLOYEE REPORTED HE WAS USING A SLEDGE HAMMER TO STRIKE A TRACK LINK ON A D11 CATERPILLER DOZERWHEN A SLIVER OF STEEL STRUCK HIS FOREHEAD.

EE STATING HE WAS STANDING ON A HOIST MOTOR PEDESTAL HELPING INSTALL A HOIST DRUM BEARING. A PIECE OF ALLTHREAD (1 3/4" X 35 1/4") BROKE OFF A HYDRAULIC JACK SET UP BEING USED TO PRESS THE BEA RING INTO PLACE. THE ALLTHREAD HIT THE EE IN THE HAND, CAUSING CRUSING INJURIES TO THE FINGERS.

EE IS STATING THAT HE WAS PRESSING A BUSHING INTO A CRAWLER FRAME USING A PIECE OF 3/4" ALLTHREAD AND A PORTAPOWER. THE BUSHING BEGAN TO PULL HARD AND EE CONTINUED PRESSURE FROM PORTAPOWER. AS FORCE WAS APPLIED, THE ALLTHREAD SNAPPED AND A PIECE OF IT STRUCK THE EE IN THE LOWER LEG.

EE WAS CUTTING THE INSULATION OFF A 14-3 CABLE WHEN THE BELT KNIFE SLIPPED AND CUT HIS RIGHT THIGH REQUIRING SUTURES.

EE WAS CUTTING THE LID OF A PLASTIC BUCKET AND THE KNIFE SLIPPED CUTTING HIS LEFT LITTLE FINGER.

EE STATED THAT WHILE UNLOADING STEEL BEAMS OFF THE SCOOP, WHEN HE CUT THE BAND HOLDING THE BEAMS, ONE STEEL BEAM SLUNG AROUND AND STRUCK HIM ON THE LEFT SIDE OF THE CHEST AND SHOULDER.

EE REPORTED THAT HE WAS HOLD A STEEL PIN WHILE ANOTHER MECHANIC STRUCK PIN WITH A HAMMER WHEN ASLIVER CAME OFF PIN STRIKING EE ON RIGHT WRIST

EE USING UTILITY KNIFE TO CUT BELTING PULLED KNIFE BACK AND INTO LEG ABOVE RT KNEE CAUSING A 2 CM CUT THAT REQUIRED SUTURES TO CLOSE.

EE STATED THAT HE WAS STANDING ON END LOADER FENDER WHILE SWINGING A SLEDGE HAMMER TO DRIVE PIN BACK IN AN END LOADER ARM. HE STATED HE FELT PAIN IN NECK AND BOTH ARMS.

EE WAS STANDING INSIDE THE MIDDLINS CRUSHER CHUTE IN AN AKWARD POSITION WHEN HE FELT A POP IN HIS RIGHT KNEE. HE WAS IN THE PROCESS OF CUTTING LOOSE BOLTS THAT HOLD A GRINDING PLATE IN PLACE U NDER OUT CRUSHER, WHEN THE ACCIDENT OCCURRED.

EE WAS USING A SCREWDRIVER TO REMOVE OLD COUPLING FROM SLURRY PIPE. THE SCREWDRIVER SLIPPED AND HE CAUGHT HIS RIGHT THUMB ON COUPLING CAUSING A SMALL LACERATION BELOW HIS THUMBNAIL. REQUIRED 3 SUTURES.

EMPLOYEE STATED THAT WHILE OPENING A PLASTIC CAN OF CERAMIC BEAD THE UTILITY KNIFE HE WAS USING SLIPPED CUTTING HIS RIGHT LEG 4 SUTURES.

MAN STATED HE WAS REMOVING BROKEN BIT FROM LONGWALL SHEAR DRUM WHEN A SLIVER OF METAL STRUCK HIS RIGHT EYE.

EE WAS USING A WATER JACK TO PUSH THE STAGELOADER TO ALIGN THE TAILPIECE AND THE WATER JACK SLIPPED AND STRUCK HIM ON THE FOREHEAD. THIS RESULTED IN 7 SUTURES TO THE FOREHEAD.