Buscar en el registro

EMPL BACKED TRUCK UNDER SLATE HOPPER AND GOT OUT OF TRUCK AND A PIECE OF ROCK FLEW INTO EYE.REPORTABLE DUE TO RX MEDICATION.

EMPLOYEE WAS ROCKDUSTING AND RAN INTO RIB WITH HIS HARD HAT.

INJ EMPL WAS INSTALLING ROOF BOLT WHEN HE REPORTED THAT HYDRAULIC FLUID SPRAYED INTO EYES. ACCORDING TO EMPL HE WAS WEARING SAFETY GLASSES AT TIME.

EMPL OPERATING ROOF BOLTER -PIECE OF ROCK FELL FROM ROOF BOLTER CANOPY STRIKING EMPL ON LOWER BACK.

EMPLOYEE WAS OPERATING AN ELECTRIC SANDER AND HIS LEFT WRIST MADE CONTACT WITH THE BIT.

EMPLOYEE WAS BENDING A ROOF BOLT IN LOW TOP,THE BOLT FLIPPED AROUND HURTING BACK.

EMPLOYEE WAS INSTALLING A ROOF BOLT SUCTION STOPPED WORKING SO HE LET DRILL HEAD DOWN LEAVING STEEL IN ROOF THE STEEL FELL STRIKING EMPLOYEE ON RIGHT INDEX FINGER

EMPLOYEE WAS INSTALLING ROOF BOLT. A ROCK FELL STRIKING EMPLOYEE ON LEFT ANKLE.

EMPLOYEE WAS IN A STOOPED POSITION PUSHING ON HYDRAULIC DRILL AND FELT PAIN IN RIGHT KNEE.

EMPLOY6EE WAS PUTTING COAL SAMPLES IN THE GRINDER AND FINE PARTICLES OF COAL CAME BACK IN HIS FACE AND EYE.

EMPL WAS OPERATING ROOF BOLTER WHEN RIB ROLLED OFF STRIKING EMPL ON BACK & RIGHT LEG.

EMPLOYEE STATED THAT HE AGGRAVATED HIS KNEE ON 08-29-89 DURING THE COURSE OF HIS REGULAR EMPLOYEMENT ACTIVITIES.A PREVIOUS KNEE INJURY OCCURRED ON 08-10-88 AND WAS REPORTED TO MSHA.WE DID NOT KNOW THAT THE INJURY WAS WORK REALTED UNTIL 09-13-89 WHEN EMPLOYEES WIFE CONTACTED US CONCERNING COMPENSATION BENEFITS.

EMPLOYEE WAS OPERATING ROOF DRILL THE ROTATION STOPPED CAUSING THE DRILL STEEL TO BEND CATCHING THE EMPLOYEES FINGER AGAINST THE FRAME OF THE DRIILL HEAD.

EE WAS BACKING THE MINER AND NOT WATCHING THE CABLE AS TO THE AMOUNT OF CABLE LEFT, THE CABLE TIGHTENED UP AND HIT HIM IN THE SIDE.

EMPL MOVING ROOF BOLTER OUT OF #5 ENTRY AND HE WAS CAUGHT BETWEEN ROOF BOLTER AND RIB.

EMPLOYEE WAS STANDING BEHIND CURTAIN AND DRILL OPERATOR WAS MOVING DRILL AND THE CABLE JERKED OUT OF HANGERS STRICKING EMPLOYEE ON THE BACK OF LEGS MAKING HIM FALL, STRICKING HIS RIGHT SHOULDE R ON BOTTOM.

EMPLOYEE WAS TIGHTENING ROOF BOLT WHILE RAISING HEAD WITH BOLT, THE ROOF DRILL HEAD CAUGHT A PIECE OF DRILL STEEL LAYING IN TRAY KNOCKING THE STEEL OUT STRIKING EMPLOYEE ACROSS CHEST.

EE WAS HOLDING METAL FOR ANOTHER EE TO WELD, WHILE DOING SO HIS EYES WERE BRUNED BY THE WELDING SPARKS FROM STAINLESS STEEL.

EMPLOYEE WAS BACKING THE CUTTING MACHINE OUT OF A PLACE, HE WAS WATCHING HIS CABLE AND ACCIDENTLY PUT HIS HAND BETWEEN THE FRAME AND WHEEL. WHEN HE TURNED THE WHEELS AND WHEEL CAUGHT HAND BET WEEN THE WHEEL AND FRAME.

EMPL DRILLING HOLE TO INSTALL ROOF BOLT AND A PARTICLE FLEW INTO HIS EYE.BECAME REPORTABLE 4-12-89 EMPL WENT TO DR.

EMPL WAS PULLING DRILL STEEL OUT OF HOLE INTO HAND HAND SLIPPED WHEN STEEL CAMEL OOSE & CAUGHT FINGERS BETRWEEN STEEL & HEAD OF BOLTER. INJURY TO LITTLE FINGER OF RIGHT HAND.

EMP WAS OPER. CUTER ROCK AND COAL FELL STRIKING EMP ON L. SHOU.DER.

CANOPY FELL ON EMPLOYEES RIGHT AHAND.

COAL DRILL RAN OVER A ROCK IN HAULWAY AND FELL CANOPY FELL HITING OPERTOR ON NECK AND SHOULDER

EMPLOYEE SAID H9 WAS TIGHTENING UP ROOF BOLT WHEN BOLT WRENCH TWISTED IN GLOVE HURTING RIGHT ARM.

WAS BOLTING TOP2 WRENCH CAME OFF BOLT STRIKING HIS SIDE

PUTTING ROOF BO5TS ON BOLTER, OPERATOR DID NOT SEE HIM AND TRAMMED MACHINE OVER HIS FOOT.

CANOPY ON A 3203GALIS HIT HIM IN THE BACK WHILE TRAMMING THE MACHINE BRRUISED EMPLOYEE'S BACK.

EMPLOYEE ALLEGES THAT HEAD OF ROOF BOLTER WAS LET DOWN ON HIS KNEE.

SMALL PIECE OF DRAW ROCK FELL AND HIT HAND WHILE BOLTING TOP

OPERATOR PARKED DOZER LEFT MACHINE FOR CONSULTATION,DOZER BEGAN TO ROLL DOWN HILL OPERATOR TRIED TO CATCH IT AND GOT CAUGHT UNDERNEATH THE MACHINE.

SHARPING POINT ON SLAG HAMMER ON GRINDER, HAMMER TURNED AND CAUGHT POINTER FINGER ON LEFT HAND BETWEEN STONE 3 GUARD.

WHILE HELPING CUTTER INTO NEXT PLACE CABLE HIT THE VICTIM ON KNEES KNOCKING HIM DOWN

EE WITH A PARTNER WHO WAS WELDING GOT FLASHED FROM WELDING ARC.

EMP WAS STANDING ON SIDE OF ROOF BOLTER HOLDING STEEL FOR OPERATOR AND OPERATOR LET BOOM FALL ON LEFT FOOT