Buscar en el registro

While repositioning roof bolter head to drill hole ee twisted lt knee. he conitued to work until 12:45 pm knee hurting and ask to come outside.

While mining operations were being done in #8 entry of the 001 section, a piece of rock fell out between the rib and the first row of bolts. The rock hit the employee on the left side of his back and down to his left hip, causing him to fall forward. The rock measured 68" long, 16" on one end and 30" wide on the other end, 2" to 8" thick.

While using hand-held grinder, it kicked back away from surface being ground and cut employee's right wrist.

WHILE OPERATING THE CONTINUOUS MINER, A PIECE OF ROCK MEASURING 3'W X 3'L X 2" THICK, FELL FROM ROOF, GLANCED OFF OF MINER AND STRUCK EE'S RIGHT ANKLE AND FOOT. HE FINISHED SHIFT AND WORKED NE XT 4 DAYS BEFORE GOING TO DR. AT THAT TIME, HE DISCOVERED THAT HE HAD A BROKEN BONE.

WHILE DRILLING ROOF BOLT HOLE, BOOM EXTENDED TO LIMIT, DRILL HEAD WAS LOWERED TO PLACE BOLT WRENCH SO DRILL STEEL COULD BE PUSHED TO CORRECT DEPTH. INITIALLY DRILL STEEL WAS STUCK IN HOLE BUT WHEN EMPLOYEE WENT TO PLACE BOLT WRENCH IN CHUCKDRILL STEEL CAME LOOSE, STRIKING HIS HAND.

PIECE OF ROCK FELL ON DRILL HEAD OF BOLTER & EE WAS CLEARING IT WHEN ANOTHER PIECE FELL STRIKINGHIS HAND. HE LOST THE FIRST JOINT OF MIDDLE FINGER & SUSTAINED A FRACTURE OF THE SECOND JOINT.

WHILE TRAMMING MINER TO NEW PLACE, MINER HELPER SWUNG CABLE OUT OF WAY AND IT STRUCK MINER OPERATOR ON ANKLE.

EMPLOYEE WAS HELPING BOLTER CREW TO INSTALL BOLTS AND SCREEN IN #4 ENTRY OF SECTION 003. A PIECE OF ROCK IMBEDDED AND FELL FROM TOP AND STRUCK EMPLOYEE'S LEFT FOOT. THE ROCK MEASURED 14" BY 15 " BY 4 1/2" THICK.

WHILE DOING REG ROOFBOLTING ACTIVIITES EE WAS STRUCK BY A SLIVER OF ROOF MEASURING 2"TX3"LX2" W THAT FELL OUT FROM BETWEEN THE ROOFBOLTS. THE ROCK STRUCK EE'S ANKLE

A BOLTER OPERATOR IN OUR SECTION 002 WAS LINING UP BOLT WRENCH WITH HEAD OF BOLT WHILE HOLDING BOLT WITH FREE HAND AND AS WRENCH AND BOLT CONNECTED HE INADVERTENTLY HIT ROTATION LEVER, WRENCHI NG LEFT HAND. NOTE: OUR BOLTERS ARE EQUIPPED WITH "HANDS OFF" EQUIPMENT

PIECE OF DRILL STEEL HUNG IN HOLE WHEN ROOF DRILL HEAD WAS WITHDRAWN; AS EMPLOYEE WAS REMOVING DOLLY WRENCH FROM DRILL HEAD. THE HUNG STEEL LET GO AND CAUGHT EMPLOYEE'S FINGER BETWEEN STEEL AN D WRENCH.

EMPLOYEE WAS HELPING ON MINVER WHILE IT WAS TAKING 2ND CUT IN PILLAR BLOCK #49. THERE WAS A RIB ROLL FROM BLOCK #54 (SOLID PILLAR) WHICH STRUCK EMPLOYEE'S LOWER LEFT LEG CAUSING A SIMPLE FRACT URE OF FIBULA AND TIBULA. THE RIB ROLL MEASURED ABOUT 5'LONG X 2.5' WIDE X 6" THICK WITH A 4" MIDDLE ROCK BAND.

EE WAS ON TOP OF ROOFBOLTER MARKING CENTER LINE WHILE BOLTER WAS POWERED. VICTIM STEPPED OFF OF BOLTER WHILE BOLTER OPERATOR WAS DRAWING DRILLING BOOM BACK TO DRILL HOLE. HE STEPPED INTO THIS PINCH POINT AND BADLY BRUISED HIS LEFT FOOT AND ANKLE.

AFTER EATING, EMPLOYEE WAS PLACING HIS DINNER PAIL ON THE BOLTING MACHINE AND THE OPERATOR THOUGHT HE WAS CLEAR AND RAN BOLTING MACHINE OVER VICTIM'S FOOT.

A PIECE OF ROCK FELL OUT BETWEEN ROOF BOLT AND RIB STRIKING RIGHT SIDE OF LITTLE TOE AREA ON THE LEFT FOOT.

WEIGHT ON BLOCKS CAUSING RIBS TO ROLL OFF.

INJ HELPING GET MINER INTO PLACE.MOVING CABLE WHEN OPER TOLD HIM THAT HE WAS GOING TO MOVE MINER AND TO WATCH OUT.INJ TOLD HIM TO GO ON.AS MINER MOVED,BOOM CAUGHT INJ AGAINST RIB INJURING HIP