Buscar en el registro

Employee was welding overhead on a dragline when a piece of slag fell into right eye. EE was treated by an optometrist who removed the foreign body.

Employee reported lower back pain after operating a dozer. The medical evaluation identified degenerative conditions in the lumbar spine. Diagnostic results were obtained 5/7/14.

On April 13, 2014, employee reported lower back strain after jarring back while operating bulldozer. Physician issued lifting restriction on April 21 that prevents employee from fulfilling normal duties.

Employee was installing track pin when the track press failed causing an object to strike him in the forehead.

Employee was cleaning a weld on the lip of an excavator bucket with an air chipper when a piece of debris made contact with his eye. He was treated by an optometrist who removed the foreign body and applied antibiotics.

Employee reported pain in groin area while operating dozer. Diagnosed with a hernia. Compensability not yet determined.

Employee reported while operating a dozer, he ran over a rock and hit his head inside the cab. Two days after the incident (8/9), he began complaining about neck pain and clumsiness of the left arm.

A bulldozer operator on a D10R Caterpillar dozer went over an approximately four foot tall steeply sloped bank. As the machine proceeded over this bank, the front end cantilevered and dropped suddenly and struck the ground, jarring the operator.

Employee was using an air chipper for a welding project. He reported putting the air chipper down when the trigger engaged blowing accumulated slag particles into his eyes. Employee was treated by an optometrist who removed a corneal foreign body from his left eye. Employee has not missed any work time or been restricted as a result of this injury.

Employee was working in the house structure of the dragline, when he felt pulling at back of left foot. Employee was referrred to a physician on 12/2/08 and was restricted from all work activities.

Employee reported back pain on 10/31/08. Referred to a physician for evaluation. Physician referred employee for continuing chiropractic treatment on 11/17/08. Employee has not missed any work time or been restricted as a result of this injury.

Employee reported back pain on 9/22/08. Referred to a physician for evaluation who referred employee for chiropractic treatment on 10/8/08. Employee has not missed any work time or been restricted as a result of this injury.

EE reported pain in middle back after operating a bulldozer to rip and push a layer of rock. Referred to physician who prescribed physical therapy for treatment. No work restrictions or lost workdays occurred as a result of this injury.

Employee was operating a dozer (341) on a dozer push for 1-1/2 weeks. The machine was reported as riding rough causing the employee pain in his lower back (for the past three weeks). He was referred to physician who prescribed physical therapy for treatment (3/29/05). This employee has not missed any work time or been restricted as a result of this injury.

Employee was operating a dozer when a rock came off the highwall (right side). The rock came through the door glass over right leg striking the employee in the left ankle. This employee notified employer on 11/18/04 that he was pursuing physical therapy (treatment option).

EMPLOYEE WAS ARC GOUGING IN THE TUB. EMPLOYEE FELT SOMETHING IN LEFT EYE.

EMPLOYEE SAID THAT THE BACKUP WRENCH THAT HE WAS HOLDING PINCHED HIS RING FINGER ON HIS LEFT HAND BETWEEN THE WRENCH AND TIRE RIM WHEN THE BOLT BROKE LOOSE FROM THE POWER OF AN IMPACT WRENCH.

APPARENTLY EMP WAS ATTEMPTING TO STRAIGHTEN A BULL DOZER TILT ADJUSTING BRACE BY USING A 200 TONPRESS WHEN THE PRESSING TOOL SLIPPED OFF THE BRACE AND STRUCK EMP IN LEFT SIDE OF FACE.

APPARENTLY THE EMPLOYEE WAS OPERATING A SCRAPER ON A STEEP GRADE WHEN HE HIT A HOLE IN THE HAUL ROAD CAUSING HIS SEAT TO COLLAPSE RESULTING IN STRAINED CHEST MUSCLE.

APPARENTLY THE EMPLOYEE REACHED FOR THE DRILL AIR CONTROL LEVER IN A DRILL WHEN HIS RT WRIST BEGAN TO HURT & HE COULD NOT STRAIGHTEN IT DR DIAGNOSED THE EMPLOYEE AS HAVING A SPRAINED WRIST & A PPLIED A SPLINT TO IMMOBILIZE IT

EMPLOYEE SAID THAT WHILE HE WAS RIPPING ROCK WITH A DOZER THE MACHINE JERKED THROUGH THE ROCK JARRING HIS LOWER BACK NOTE EE WENT TO A CHIROPRACTOR (VICIT NOT AUTHORIZED BY EE) EE MINE RECEIVE D A BILL FROM DR ON DEC 30 1994 WHICH WAS THE F IRST NOTIFICATION EE RECEIVED THAT EE WAS SEEING A DOC FOR HIS INJURY

APPARENTLY THE EE HIT HIS HEAD ON THE FIARLEADS OF THE DRAGLINE HURTING HIS NECK. HE DID NOT RECEIVE MEDICAL TREATMENT UNTIL NOV 20.

EMPLOYEE SAID HE WAS GRINDING OVER HEAD AND A PIECE OF METAL FELL IN HIS EYE. THE EMPLOYEE WAS WEARING SAFETY GLASSES AND A FACE SHIELD.

THE EMPLOYEE SAID HE WAS BACKING A DOZER & THE TRACTOR SLID OFF A ROCK WHICH CAUSED SOME PAIN IN H IS NECK I NAME REPORTED THIS INCIDENT ON 02-04-92 BUT WAS NOT TREATED UNTIL 02-14-92 FOR THE INJURY AT WHICH TIME IT BECAME A MEDICAL TREATMENT

EMPLOYEE SAID HE WAS MACHINGING A METAL PIN ON THE LATHE & REACHED UP TO PULL OFF WHAT HE THOUGHT WERE LOOSE METAL SHAVINGS THE SHAVINGS WERE NOT LOOSE & AS THE LATHE TURNED THE SHAVCINGS CUT HIS THUMB

EMPLOYEE SAID THAT HE WAS CHANGING TEETH ON A DRAGLINE BUCKET WHEN ANOTHER EMPLOYEE USING AN AIR CHISEL SMASHED HIS THUMB BETWEEN THE TOOTH AND THE CHISEL.

THE EMPLOYEE SAID HE WAS TAKING A BOLT OUT OF IDLERS ON A D9L DOZER WITH AN IMPACT WRENCH. THE PIN CAME OUT OF THE SOCKET ON THE IMPACT WRENCH AND CAUGHT THE PALM OF THE LEFT HAND. TWO LACERAT IONS RESULTED, REQUIRING TREATMENT AND STITCHES BY MEDICAL PERSONNEL.

APPARENTLY I.NAME WAS USING A HUDRAULIC PUMP & BEARING PRESS TO INSTALL A PIN THE PRESS BROKE STRIKING I.NAME IN THE JAW & NOSE

INAME APPARENTLY RAISED UP UNDER A METAL BEAM STRIKING THE POINT OF HIS SHOULDER ON THE BEAM.

EMPLOYEE CLAIMED HE STRAINED HIS LOWER BACK WHILE WELDING GROUSER BARS ON DOZER TRACKS.

IT APPEARS THAT I.NAME CRAWLED ON THE DRAGLINE SHOE FROM THE INSIDE OF THE SHOE AND WAS PINCHED BETWEEN THE BEAM SUPPORTING THE SHOE GUIDE AND THE SHOE OF THE DRAGLINE

EMP SAID HE WAS3GRINDING ON WELD TABLE ND CUT HIS FINGER ON THE EDGE

EMPLOYEE SAID H9 WAS GRINDING ON THE DRAGLINE SPUD AND GOT SOMETHING IN HIS EYE

I.NAME WA INSTA5LING A TRANSMISSION PUMP ON A HAUL TRUCK. WHILE USING AN IMPACT WRENCH ABOVE HIS HEAD THE SOCKET CAME OFF THE GUN & STRUCK HIM IN HIS MOUTH.

I.NAME REPAIRIN1 DOZER ON PIT FLOOR WELL OUT OF DRAGLINE RADIUS.ROCK ROLLED OUT OF BUCKET AND ROLLED DOWN 300' DOWN PIT FLOOR.ROCK HIT PICKUP WHILE I.NAME GETTING SOME TOOLS.TOOL BIN DOOR HIT I.NAME IN ABDO4EN.

I NAME WAS HELP3NG REPAIR A DOZER ON THE PIT FLOOR WELLOUT OF THE DRAGLINE RADIUS A ROCK ROLLED OUT OF THE BUCKET AND ROLLED ABOUT 300 FT DOWN THE PIT FLOOR THE ROCK HIT THE PICKUP WHILE I NA NAME WAS GETTIN1 SOME TOOLS THE TOOL BIN DOOR HIT I NAME IN THE ADOMEN AND HE HURT HIS BACK

WHILE MEASURING3DRILL HOLES & CLEANING THE DRILL A DRILL AIR COMPRESSOR BLEW A ROCK CHIP IN I.ANMES EYE.

WHILE RUNNING I4PACT WRENCH HE GOT A METAL FRAGMENT LODGED IN HIS EYE.

HE WAS MOUNTING3BOOM SECTIONS ON THE 90 TON CRANE WHEN THE PENANT LINE SLIPPED PINCHING HIS FINGERS.

WHEN WELDING DO2R BACK ONTO WELDER, HE GOT A PIECE OF HOT WELD INTO HIS EAR. BURNING RIGHT EAR.

WHILE WORKING O3 THE DRILL HE STRAINED HIS BACK.