Buscar en el registro

Injured employee was operating an excavator on the slate. He swung the bucket around and caught a rock and jerked his lower back.

Spinning drill steel & pulling down on it to remove stuck steel out of top when glove got caught.

Miner's hand was on drill pot when right middle finger was caught between uneven top and drill pot which cut end of finger off between finger nail and first joint closest to fingernail.

Trying to get drill steel out of top, the drill steel fell out striking him on the right hand.

Employee was putting pusher & finisher together caught left index finger between steel, pinching end of finer off.

Person was putting roof bolts up and got glue in right eye at #4 heading.

Employee was installing roof bolt & caught his left hand on boom resulting in injury. (Ring finger.)

While drilling anchor hole, the fitting connected to the hose busted, splashing hyd. oil in eyes and mouth.

EE was bolting top in #6 heading on #2 section, drill steel fell out of hole and landed on his left middle finger and ring finger.

Removing drill steel from hole, got right forearm between boom and roof.

Straightening bolt and slipped forward pulling lower back.

Loading pin plates, pin plates fell on right ring finger, broke finger cut it open.

Employee was running a D5G Dozer. Was working on underbrush in the valleyfill, was helping the 330 excavator, when a rock got under the dozer and turned him over. He went over a 20' ledge landing on its top, then rolling back onto its tracks. He has a small cut to the right side of his head and some pain in his left shoulder.

INJURED WAS BOLTING SHEILDS ON A MACHINE WHEN SHIELD FELL ON HIS FOREARM CAUSING A LACERATION

Employee was pushing with the D5 Cat Dozer. While backing up, he ran into a tree causing the dozer to shake very hard. He said he hit so hard it caused pain in his neck. He didn't feel like he needed to go have it checked, he just applied heat to it, said he just wanted to file it in case it got worse.

BENDING OUT ROOF BOLT FOR LAST PUSH UP TO INSTALL IN TOP. BOLT TURNED & SPRANG BACK, STRIKING EE ON THE TOP OF HIS NOSE.

Putting up last row outside bolt swung pot into right knee and leg.

WHILE BOLTING CAUGHT HEAD BETWEEN POT AND TOP SEVERLY CUTTING RIGHT EAR.

A PIECE OF STEEL CAME OUT OF HOLE CATCHING FINGER AGAINST DRILLPOT ON PINNER

WAITING FOR PINNER TO MOVE UP TO NEXT ROW, HE HAD LEFT FOOT LAID OUT BEHIND HIM WHEN PINNER PULLED UP AND RAN OVER FOOT.

WHILE INSTALLING ROOF BOLT, BOLT KICKED BACK AND HIT EE IN THE SHOULDER. PRESSURE FROM DRILL POT.

Drilling holes-getting ready to leave-twisted and pulled back old injury.

RATCHING JACK UP TO ATRS ON BOLTER, HOOK CAME LOOSE AND ALLOWED JACK TO FALL ON THUMB. EMPLOYEE HAD THUMB RESTING ON CRIB BLOCK.

ROCK FELL BETWEEN RIB AND BOLTER AND PINNED LEG TO GROUND.

Ee was operating #2 bridge. Miner backed up, bumped #1 bridge and shoved #2 into ee.

EE WAS WELDING ON MINER REPORTED HE WENT HOME AND SHOWERED ADN HIS EYES BEGAN TO BURN.

LOADING COAL WITH MINER PIECE OF DRAW ROCK FELL FROM BETWEEN PINS HITTING HIM IN HEAD & RIGHT SHOULDER.

A PIECE OF ROCK BROKE OFF FROM THE RIB TO THE FIRST BOLT. EE RECEIVED A STIFF NECK.

WHILE PINNING A BOLT, THE PIN PLATE CAUGHT GLOVE AND PULLED IT OFF, BRUISING HIS THUMB.

PUTTING PUSHER & FINISHER TOGETHER WHEN LEVER MALFUNCTIONED CAUSING POT TO KEEP GOING UP & PINCHING HAND. EE REQUIRED STITCHES.

EE WAS BOLTING THE ROOF TOP-PUT DRILL STEEL AGAINST TOP-A LOOSE PIECE OF DRAW ROCK CAME LOOSE HITTING EE, CAUSING A SMALL CUT ABOVE WRIST AND SOME SWELLING.

SMALL PIECE OF ROCK FELL WHEN STARTING STEEL IN TOP & BROKE RT THUMB.

A PIECE OF ROCK FELL FROM BETWEEN THE RIBS AND THE BOLTS, BRUISED BACK AND KNOT ON SHOULDER.

CUT FINGER WHILE BOLTING TOP. CAUGHT FINGER BETWEEN STEEL AND PT #4 ENTRY.

ANOTHER EE WAS USING AN AIR MAILER AND HIT A GLANCING MAIL ON WOOD FRAME, THE STRAY NAIL FLEW THOUGHT THE AIR AND STRUCK EE ON RIGHT CHEEK ON HIS FACE.

LOOSE SLATE FELL FROM ROOF AND CUT RT FOREARM.

DRAW SLATE FELL STRIKING VICTIM ON SHOULDER AND ARM.

DRILLING TOP AND DRILL STEEL BROKE AND CUT LEFT HAND.

EMPLOYEE WAS WELDING ON THE BLADE OF A D-6 DOZERWHEN HE INADVERTANTLY STRUCK AN ARC AND RECEIVED A FLASH BURN IN EYES DUE TO WELDING.

MANUALLY CRANKING BOOM DOWN ON TOOL TRUCK WHEN ADEFECTIVE SOLENOID SUDDENLY ENGAGED CAUSING THE BOOM MOTOR TO START AND BEGIN TO SPIN THE CRANK UNDER POWER - CRANK STRUCK THE RIGHT WRIST OF EE CAUSING A SMALL BONE FRACTURE.

USING AIR HAMMER OT TIGHTEN BOLTS. HAD A WELDING ROD USING AS A PIN TO HOLD BOLT. WELDIGN ROD BLEW OUT, CUTTING LEFT HAND.

CUTTING BOLTS OFF OF SHOCKS UNDER COMPANY TRUCK WITH CUTTING TORCH. HOT METAL FELL INTO EAR.

EMPLOYEE WAS OPERATING A D11-N DOZER PUSHING MATERIAL DOWN SLOPE AS THE DOZER CLIMBED OVER A ROCK IT GAVE A WAY CAUSING THE DOZER TO SLIP & ROLL OVER TURNED FINALLY RESTING ON ITS TOP AS THE D OZER ROLLED THE EMPLOYEE SURVED FROM LEFT SIDE OF HIS HEAD & LEFT ELBOW ON SOMETHING

DOZER WENT TOO FAR FORWARD WHILE PUSHING COAL IN TUNNEL FEEDER & WENT INTO 15' X 10' HOLE.

EMPL REMOVING ROCK CAUGHT IN ARM OF AUTO SAMPLER AND AS ROCK WAS KNOCKED AWAY FROM ARM,IT THREW THE ROCK BACK AT EMPL STRIKING HIM 1/2" ABOVE RIGHT EYE.EMPL RECD 7 STITCHES BUT NO IMPAIRMENT.

ASSISTING WELDER AT WORK WHEN EYES WERE BURNED.

HANGING CABLE A3D SOMEONE PULLED CABLE IN WHILE HE HAD HOLD OF CABLE AND THIS JERKED HIM AND HE FELL BACKWARDS.

OPERATING THE MINER BACKING UP AND HIT HEAD ON TOP IN LOW COAL AND HIT NEKC ON TRAM LEVERS AND INJURED NECK

EMPLOYEE WAS TIGHTNING UP A ROOF BOLT AND A PC OF METAL OR GLUE FELL INTO EYE