Buscar en el registro

Left thumb was caught between the swinging door of the 1P1 fan and the 1P1 fan case, which caused a fracture to the thumb and required 13 stitches to close the laceration.

EE was using skill saw when the guard struck the saw and grabbed his pant leg. This resulted in a laceration to his upper right leg about 2" above his knee.

injured employee was clearing a plastic film jam up from the handlemaker on the Hamer Form Fill & Seal Automated Packaging Machine. Somehow his gloved right hand became caught in the top seal belt assembly causing crushing/cutting off injury to his right thumb.

Employee was collecting sample while holding bag on spout became distracted. In process of looking away finger was pinched by the bag holder clamp on packaging machine. This reflex action caused finger to hit a bolt resulting in laceration. Employee did not seek medical treatment at time of injury. Employee went for treatment 24 hours later which resulted in Restricted Duty.

Employee failed to relieve the air pressure in a 2" air line before removing the air line from the air compressor. The air hose fitting hit the employee in the right leg and caused a 1-1/2" long laceration which required 5 stitches to close.

Injured employee was checking the tension on the film feed belt of the Hamer automated packaging system while it was running. His left middle finger was caught in the tensioner pulley thus causing the injury. This was a violation of company policy/procedure.

Worker was gringing a piece of metal to make room for another piece to fit when a piece of metal or gringing material entered under the face shield. (Bounced off chest).

EE STATED HER LEFT FOOT SLIPPED ON THE GRATING WHILE SHE WAS PLACING AN EMPTY PAPER BAG ON THE LEFT HAND PACKER SPOUT IN #1 PACKAGING AREA. WHEN SHE TRIED TO CATCH HERSELF FROM FALLING, SHE TWISTED HER LEFT HIP AND LOWER BACK. EE SHOWED UP FOR WORK THE NEXT DAY AND WAS TOLD TO GO TO THE DOCTOR.

MOWING LAWN. ADJUSTING HEIGHT OF LAWN MOWER. PLACED HAND ON MUFFLER & SUSTAINED BURNS. FIRST AID TREATMENT, BUT REQUIRED ONE FOLLOW-UP TREATMENT (WHIRLPOOL) & EVALUATION.

REMOVING BOLTS FROM AIR LIFT IN ORDER TO CHANGE THE LINER. USING 1/2 INCH IMPACT WRENCH, WHEN IT SLIPPED SMASHING MY FINGER BETWEEN THE WRENCH AND THE AIRLIFT. FOR PREVENTATIVE/DIAGNOSTIC EVAL UATION MEASURES EMPLOYEE WAS SENT TO CLINIC FOR XRAYS. RESULT - NOT BROKEN. **RESTRICTED DUTY ONLY** INJURY REPORT.

VIBRATOR HOSE GOT CAUGHT AND VIBRATOR SLIPPED DN HIT LITTLE FINGER ON RIGHT HAND.

WHILE WELDING, WORKER LAID DOWN HIS WELDER AFTERHAVING TAKEN OFF HIS WELDING MASK. THE WELDER FLASHED, BURNING HIS EYES.

I WAS GRADING ROADS & THE BLADE ON THE GRADER HIT A ROCK & KNOCKED ME AGAINST THE STEERING WHEEL HITTING MY ELBOW AGAINST THE STEERING WHEEL

BAG LOCK DID NOT CATCH ON BAG SPOUT & WHEN HE TURNED THE MACHINE ON THE PRODUCT BLEW UP INTO HIS FACE

BLOWING AIR TO CLEAN OUT UPPER BUELL, OLD AND PACKED ORE. PULLED LID INTO PLACE CAUGHT FINGER WHEN TRYING TO GET LID BACK. SUCTION FROM UPPER BUELL PULLED LID DOWN ON HAND, FINGER.

EMPLOYEE AS STEAM CLEANING. EMPLOYE EWAS WEARING PROTECTIVE FACE SHIELD. EMPLOYEE MOMENTARILY LLIFTED FACE SHIELD WHEN FORIEGN OBJECT LODGED IN HIS RIGHT EYE.

PACKIGN POWDER, STACKING THEM ON PALLES, WAITING FOR A PALLE TOT FILL WHEN I BLEW UP AND I GOT POWDER IN MY EES.

WHILE WORKING ON INK JET PRINTER, INK AND SOLVENT GOT ONTO SKIN BREAK ON RIGHT THUMB AND LEFT RING FINGER, WHICH BECAME INFECTED.

SET A-27 ROSS MILL UP TO LATHE DOWNT HE ROLLERS, GROND THE ROLER TO GET AN EVEN LOW POINT, STOP ROLLER, MEASURE, GRIND, STOP, MEASURE, ECT 10:AM TOOK BREAK WASHED THE GRINDING DUST OFF FACETHE N AFTER BREAK NOTICED A BURNING IN EYES (METAL SHAVINGS).

EMPLOYEE PULLED MUSCLE IN RIGHT SHOULDER WHILE PALLETIZING IN #2.

EMPLOYEE STATES HELPING EE WIT H JAMMED PALLETS WHEN ONE FELL OUT & ON MY RT FOOT

EMPLOYEE WAS PALLETIZING & HIS HAND SLIPPED OPFF A BAG & HIT A METAL BACKING FOR THE BAGS

54736YEE STATES: I WAS SITTING ON F-14 FAN GRINDING ON THE RIGHT SIDE, SCOOTED OVER AND FELT SHARP PAIN IN BACK ON LEFT SIDE.

HE WAS DRILLING & ATTEMPTED TO DISCONNECT STILL FROM HYDRAULIC HEAD THE CUP HOLDING STEEL BROKE & HIT MIDDLE FINGER ON THE LEFT HAND

WORKER WAS OPERATING A D8L BULLDOZER WHEN HE BACKED OVER A PORTION OF UNEVEN GROUND. JARRED NECK AND BACK.

EMPLOYEE WAS USING SPEEDWRENCH AND PULLED MUSCLE ON UPPER RIGHT ARM BY ELBOW JOINT.

HARDFACING HAMMERS WELDING SLAG ENTERED PANTS THROUGH THIGH

REACHED OVER TO PULL BAG OFF PACKER AND A PAIN WENT FROM LEFT SHOULDER TO MY NECK.

EMPLOYEE STATES SUPERVISING INSTALLATION OF WALL PANALING WHILE WELDING WAS BEING DONE AND WITHOUT PROTECTIVE GLASSES.

WHILE CUTTING METL INSIDE MILL A PC OF INSULATION THAT HAD GOTTEN IN THE INSIDE OF HIS SAFETY GALSSES LODGED IN HIS EYE

WHILE WELDING A BRACKET ON A BROOM HE PASSED THE CUTTING TORCH FROMM HIS LEFT HAND TO HIS RIGHT. IN DOING SO HE INAVERANDTLY PLACED HIS RIGHT HAND IN THE FLAME. THIS ACCIDENT WAS CAUSED BY EITHER INATTENTION OF LACK OF COORDINATION.

EMPLOYEE STATES WHEN I WAS STACKING BAGS A BUNCHG OF BAGS CAME DOWN BACK TO BACK I MUST HAVE TURNED WRONG BECAUSE MY LEFT RIB CAGE HURTS WHEN I MOVE

WHEN ATTEMPTING3TO RELEASE JAMMED PALLETIZER, MY HAND WAS CAUGHT.

I WAS PALLETIZI3G.

EMPLOYEE WAS CELWRAPPING AND GOT HIT BY A MOVING PALLET ON THE RIGHT HEEL

WHILE EMPLOYEE WAS FREEING THE PALLET MAGAZINE TABLE IT RELEASED STRIKING HIS HAND

WELDING #1 MILL, ARC FLASH IN EYES.