Buscar en el registro

SUBJECT HAD FINISHED CLEARING JAMS IN SHAKER SCREEN. WHEN MACHINE WAS RESTARTED, A LOOSE ROCK FELL FROM THE BOX OVERHEAD AND STRUCK INJURED ON THE HEAD. HE WAS WAS WEARING SAFETY HARD HAT BUT SUSTAINED CONCUSSION AND POSSIBLE NECK SPRAIN/STRAIN.

DURING PRE-TRIP INSPECTION, EE STARTED VEHICLE AND RELEASED THE BRAKE. THE PEDAL SPRUNG BACK FORCEFULLY, STRIKING EE ON THE BOTTOM OF THE FOOT, CAUSING A SPRAINED ANKLE. THE LINKAGE TO THE BRAKE PEDAL WAS BOUND UP AND CAUSED IT TO SNAP BACK UPON RELEASE.

EMPLOYEE WAS WELDING AROUND AN OBSTRUCTION & FAILED TO NOTICE HIS PROGRESS WAS ENCROACHING ON EXPOSED FACE. HE RECEIVED WELDERS FLASH TO HIS EYES. HE RECEIVED EMERGENCY TREATMENT AT HOSPITAL & RETURNED TO WORK. HE WILL BE DISCIPLINED FOR NOT WEARING PPE.

EMPLOYEE WAS REMOVING A BOLT FROM A TRAILING ARM WHEN BOLT THAT HE WAS REMOVING BROKE LOOSE ALLOWING TRAILING ARM TO FALL AND PINNED HIS RIGHT HAND/WRIST BETWEEN AIR WRENCH AND THE GROUND.

EE WAS ASSISTING IN MANUALLY UNCHOKING THE 6614 CRUSHER CHUTE DURING WHICH AN APPROX. 4 INCH DIAMETER STONE CAREENED OFF THE CRUSHER MANTEL AND TRAVELED BETWEEN THE CHUTE AND CRUSHER, STRIKING EE.

INJURED AND ANOTHER EMPLOYEE WERE DRILLING TOE HOLE AT CEDAR HILL.THE HOLES RANGED IN DEGREE FROM 10DEG TO 55 DEG.THEY WERE ON THE THIRD HOLE ABOUT 10'TO15' DEEP WHEN THE ACCIDENT HAPPENED.EMP LOYEES WERE STANDING OFF TO THE RIGHT OF THE DRIL,APPROXIMATELY35' AWAY FROM THE DRILL AND 15 TO 16' AWAY FROM THE HIGHWALL THAT PARALLELLED THE DRILL.THEY WENT TO PICK UP CARDBOARD TUBES THA

OEPR DROP BALL CRANE WITH DOOR OPEN, PC OF STONE GLANCED OFF ROCK STRUCK EMP

EMPLOYEE WAS WELDING THE CARRIAGE OF GRAVITY TAKE-UP ON C-2 CONVEYOR WHILE STANDING IN BUCKET OF FRONT-END LOADER (COMPANY VIOLATION) UPON SHIFTING HIS BODY POSITION EMPLOYEE CARELESSLY JABBED THE HOT END OF WELDING ROD IN RT EYE

EMPL WAS MANUALLY HOLDING PART WEARING GLOVES WHILE DRILLING HOLE IN PIECE OF METAL. GLOVE CAUGHT IN DRILL BIT & WRAPPED FINGER AROUND BIT.

EMPLOYEE TOOK A GAMBLE AND CUT THE FINAL PIECE OF STEEL WITHOUT BENEFIT OF EYE PROTECTION. THIS UNSAFE ACT DIRECTLY RESPONSIBLE FOR INJURY.

AFTER INSTALLING NEW SPARK PLUGS IN WELDER ENGINE EMPLOYEE ACCELERATED THE ENGINE BY MANUALLY ASCTIVATING THE THROTTLE TO CHECK OUT ENGINE PERFORMANCE EMPLOYEE INADVERTENTLY CAME INTO CONTACT WITH ENGINE FAN DUE TO CARELESS OPERATION THROTTLE ROD WAS HELD AT A POINT IMMEDIATELY BY FAN INSTEAD OF FURTHER BACK AND AWAY FROM FAN PROXIMITY

EMPLOYEE SUBVERTED THE BARRIER AT HEAD END OF CATWALK, CLIMBED OVER THE GUARD UNTO MOTOR MOUNT PLATFORM & PLACED EXTRA TENSION ON SLIPPING V-BELTS WITH THE HANDLE OF A SHOVEL AND CAUGHT HISLEF T RING FINGER BETWEEN THE MOTOR SHEAVE AND BELTS.

EMPLOYEE WAS ASSISTING OPERATOR I NAME IN REMOVING BACK HOE FROM TRACTOR WHILE ADJUSTING THE OUTRIGGER. EMPLOYEE HAD H IS LEFT FOOT RESTING ON THE GROUND PAD WHEN OPERATOR LOWERED THE OUTRIGGE PINCHING THE FOOT BETWEEN PAD AND CYLINDER HOUSING WAS WEARING SAFETY SHOES. PINCH WAS BEYOND STEEL TOE AT METARASAL AREA.

FOLLOWING LUBRICATION OF DRIVE GEAR, EMPLOYEE STARTED ENGINE TO ADJUST BRAKE OF MAIN DRIVE. SLEEVE OF SHIRT CAUGHT GEAR OR MOVING PART AND PULLED ARM INTO UNIT AND PINCHED IT AGAINST SUPPORT I N FRAME MEMBER, CAUSING AMPUTATION.