Buscar en el registro

(Refer to Attachment)EE and other co-workers were working on a Dozer's bellypan. The pan was being held by chains on a forklift and winch. At one point the belly pan slipped and tilted which caused the cable of the winch to move up against the dozer track. The IEE had his hand on the winch cable which caught the small finger on the left hand and sliced the fingertip.

EE WAS UNHOOKING BLOW BAR FROM CRADLE WHEN BLOW BAR SHIFTED PINCHING FINGER BETWEEN BLOW BAR AND CRADLE FRAME

EMPLOYEE WAS HOLDING UP A SMALL PIPE PATCH AND TRYING TO WELD IT IN PLACE. HE WAS IN AN AWKWARD POSITION AND STRAINED HIS BACK.

ASSEMBLING D-9 DOZER, PUTTING SWING ARM ON BLADEWHILE MOVING SWING ARM, CHAIN SLIPPED. SWING ARMHIT GROUND AND BOUNCED ON TOP OF VICTIM'S LEFT FOOT.

EE WAS BEGINING TO USE A PNEUMATIC IMPACT GUN WITH A 1/2" WOBBLE JOINT ATTACHING TO A SOCKET TO SCREW BOLTS BACK ON THE HYUDRAULIC TANK OF A CAT 980C LOADER. WITH HIS RIGHT HAND HOLDING THE GU N AND HIS LEFT HAND HOLDING THE WOBBLE JOINT ANDSOCKET IN PLACE ON THE BOLT, HE SQUEEZED THE TRIGGER WHICH SPUN THE TOOLS UNKNOWN TO HIM AT THE TIME.

EE WAS USING A RIGHT ANGLE GRINDER. AS HE WAS GRINDING THE INSIDE LEG OF A STRIP OF ANGLE IRON, THE GRINDING WHEEL CAME IN CONTACT WITH THE TOP SIDE OF THE ANGLE IRON AND THREW IT BACK TOWARD EE CUTTING HIS LEFT FOREARM, LIP AND CHIN.

EE WAS STANDING ON A LADDER WITH A CUTTING TORCH CUTTING A PIECE OF METAL. A PIECE OF THE HOT METAL ABOUT 3/8 DIAMETER FELL AND BURNED A HOLE THRU HIS PANTS JUST BELOW HIS KNEE AND THEN CAME T O REST ON THE INSIDE OF HIS BOOT, JUST BELOW HISANKLE LEFT SIDE RECEIVING A 2ND DEGREE BURN.

I,NAME WAS PUSH3NG MATERIAL (CALICHE GRAVEL) TO BE PROCESSED IN THE PORTABLE JA PLANT. AS HE WAS BACKING UP, THE RIGHT TRACK WAS WALKING OVER A LARGE ROCK. I,NAME WAS UNAWARE OF THIS; THEREFOR E, HE WAS NOT E3PECTING THE SUDDEN JOLT AS THE REAR OF THE MACHINE CAME DOWN. THE SUDDEN JAR STRAINED MUSCLES IN HIS LOWER BACK. HE DID NOT ASK TO SEE A DOCTOR UNTIL JUNE 2, 1987.

I NAME WAS USIN1 A STATIONARY ELECTRIC WIRE BRUSH TO CLEAN THE THREADS ON BOLTS MEASURING 3/8X2UXXX 2 1/2 INCH. AS HE WAS HOLDING ONE WITH HIS HANDS AND PUTTING THE BOLT ON THE TOOL REST, THE WIRE BRUSH PUL5ED THE BOLT IN AND MADE CONTACT WITHT HE TIP OF HIS FINGER HE DID NOT ASK TO SEE A DR UNTIL THE NEXT MORNING.

I NAME WAS GREA8ING THE TAIL PULLEY ON THE EAGLE 2 CONVEYOR WITH HIS BACK TOWARDS THE SIMPLICITY SHAKER. A ROCK 1 1/8 -4 INCH BOUNCED OFF THE SHAKER, MSSING THE DISCHARGE CHUTE, AND HIT I NAME ON THE TOP OF 2IS HARD HAT. HERECEIVEDC A LACERATION APPROX. 1 INCH LONG REQUIRING 4 STITCHES.

MONTALVO WAS TRYING TOI START A WATER PUMP WHICH USES A DETACHABLE HAND CRANK AS THE ONLY STARTING MECHANISM. AS HE BEGAN CRANKING THE PUMP HIS HAND SLIPPED OFF THE CRANK & THE COMPRESSION OF THE ENGINE FORCED THE FLYWHEEL BACKWARDS WHICH CAUSED THA HNDLE TO FLY OFF THE SHAFT HITTING HIM ON THE LIP, THE AREA BETWEEN THE UPPER LIP & NOSTRIL WAS CUT REQUIRING STITCHES.

EMPLOYEE MENDOZA WAS SHOVELING AROUND THE TAIL PULLEY OF A CONVEYOR BELT DURING PRODUCTION WHEN A ROCK BOUNCED OFF A SCREEN AND HIT MENDOZA ON THE FOREARM

TWO LARGE AROCKS WERE CAUGHT AT THE MOUTH OF THE FEEDER. REGALADO WAS INSIDE ATHE FEEDER PRYING REGALADO SIGNALED TO BEGIN FEEDER OPERATIONS AND AS THEY STARTED, ONE ROCK BEGAN GOING THRU THE MOUTH FORCING THE OTHER SUDDENLY TO THE SIDE AND THEN BACKWARDS WHERE REGALADO WAS STANDING.

EE WAS RIPPING WITH THE DOZER. AFTER BACKING UP & STOPPING, HE SET THE RIPPER DOWN & BEGAN MOVING FORWARD TO R IP ANOTHER SECTION. THE RIPPER HIT THE TOP OF LARGE BOULDER WHICH PUSHED THE DOZER UP IN THE REAR AS FORWARD MOVEMENT CONTINUED. THE RIPPER CAME TO THE END OF THE BOULDER ALLOWED THE DOZER TO COME DOWN QUICKLY. THIS JARRED LONNIE & PULLED A MUSCLE IN HIS BACK. HE