Buscar en el registro

The employee was cutting steel using a carbon electrode. During the operation, the employee temporarily removed the face shield, allowing a particle generated by the cutting process to enter the left eye. The task was being performed under normal operating conditions.

During corrective maintenance on a conveyor belt system, the employee was aligning the belt and cleaning rollers. The conveyor remained energized and operating, with mechanical guards removed and improper tools in use. The employee's left forearm became caught between the belt and a roller.

During the operation of a track drill, one of the drill bits was positioned outside the storage channel. The operator requested EE's coworker to activate the drill changer lever while EE manually held the bit. Upon activation, the operator's right thumb was caught between two drill bits, resulting in an injury.

The worker did not maintain a safe distance from the operating crusher, exposing self to flying rocks, which have contributed to the incident.

The affected worker began workday at 6:30 AM. While loosening a screw on the machine, EE lost control of the tool EE was using, causing EE to hit forehead, specifically on the left side, at the level of the eyebrow. As a result, EE sustained trauma and a wound that required a three-stitch suture.

Improper use of tool.

Try to stop the spinning action cargo.

EE was using a Wrench Impact releasing a nut and twisted EE's right hand

Employee was polishing teeth bucket and was introduced in the eye right a metal particle.

The employee injured his left hand with the angle grinder(polisher), due to the fact that he loos not using the proper hand gear(glove).

Melting screws, a spark occurred and insert into the left ear.

Was working to take out a hydraulic piston bottle with air, the fitting broke hitting him in his middle, left hand finger, and cutting him.

Trabajando en la montura de la tapa del vibrador # 1 el empleado se mueve a buscar una extencion, se mueve el skytrack y al mover el brazo el tubo se safa dandole en el lado derecho de la cabeza y hombro derecho.

EE WAS DRILLING A HOLE INTO METAL TIP OF BATTERY CABLE TO MAKE THE HOLE BIGGER. WHEN DOING SO THE GIMLET GOT STUCK AND THE METAL TIP STARTED TO SPIN. EE WAS HOLDING DOWN THE TIP WITH HIS FINGE R AND IT GOT HIT BY THE TIP AS IT SPUN.

WHILE OPERATING THE TRACK DRILL STARTED TO RAIN HEAVILY, SO HE DECIDED TO MOVE FROM THE SITE GOING BACKWARDS. NOT NOTICING THAT THE RIGHT SIDE OF THE TRACK DRILL WAS OFF THE TRAIL CAUSING THE TACK DRILL TO ROLL OVER.

DRILLING A FITTING TO BE INSTALLED IN AN EQUIPMENT, WHEN SUDDENLY SOMETHING HIT THE EE IN THE MOUTH. THE EE PRESUMES IT WAS THE DRILL'S ADJUSTMENT KEY

THERE WAS NO ELECTRICITY AND THE EE TOOK THE BENCH GRINDER AND PLACED IT ON THE BUMPER OF THE WELDING TRUCK NOT SECURING IT. THE BENCH GRINDER FELL AND HE TRIED TO HOLD IT WHILE RUNNING.

WHILE THE JAW CRUSHER WAS RUNNING A HARD BOULDER FLEW OUT FROM THE HOPPER AND RUB THE EMPLOYEE DROPPING HIM INTO THE WALKWAY.

THE CRUSHER GOT PLUG WITH A ROCK. THE EMPLOYEE TRYING TO UNPLUG IT WITHOUT USING A CRANE BAR GOT HIT BY THE ROCK.

WHILE CHANGING A STEEL ROD, EVEN THROUGH THAT, HE WAS WORKING WITH HIS GLOVES ON AND HE PINCHED HIS THUMB.

WHILE EMPLOYEE WAS WELDING A PARTICLE FELL ON HIS RIGHT EYE. THE EMPLOYEE WAS WEARING HIS WELDING HERMET.

EE WAS GRINDING A PIECE OF METAL TO MAKE A WRENCH WHEN HE SLIPPED AND FELL ON TOP OF THE GRINDER CATCHING HIS KNEE.

WHILE WELDING, A PIECE OF HOT IRON FELL INSIDE HIS BOOT.

EMPLOYEE WAS SOLDERING AND A PIECE OF HOT SLAG FELL AND BURNED HIS RIGHT FOOT.

THE DOZER OPERATOR WAS STRIPPING A BENCH ONT HE EAST SIDE OF THE QUARRY DURING THE WHOLE WEEK & ???? AS HE WAS FINISHING HIS SHIFT AT 3PM STARTED TO CLEAR THE ACESS ROAD ON THE UPPER BENCH WERE THE INJURED MAN WAS DRILLING. MAKING A OULDER TURN OVER HITING HTE MAN ON THE LEG. FRACTURING HIS LEFT FEMUR.