¿Quieres dar seguimiento? Suscríbete al feed RSS de víctimas mortales de Puerto Rico — cada nueva víctima mortal ante la MSHA, en tu lector en cuanto se registra.
Employee was walking at the plant facilities, a cornerstone of the crane collapsed, hitting the employee directly to the body and falling down. Employee was wearing safety equipment as required (capacete). Received multiple injuries to the upper and lower body.
For unexplained reasons, the miner gained access to a secondary road, adjacent from where he was instructed to do road maintenance. Miner removed berm and came too close to road edge, loosing control of equipment and falling through a steep slope, rolling over with the machine. This resulted in miners death. Miner was not wearing seat belt.
Extrayendo material en el lado noreste de la charca de extraccion el chofer, no sabemos la razon, hizo un viraje en el lado noroeste de la charca y cayo a la misma con su camion. El chofer fallecio.The victim's truck was loaded with his first load of the shift. He was backing his haul truck out of the extraction area(pit) when truck traveled across a field into a water filled pit.
THE EMPLOYEE WAS PUSHING MATERIAL WITH HIS BULLDOZER WHEN A LANDSLIDE FROM A SLOPED MINE WALL FELL WITH ROCKS CRUSHED THE CABIN. THE EMPLOYEE WAS TRAPPED AND WOUNDED WITH ONE OF THE SUPPORTS O F THE CABIN, CAUSING IMMEDIATE DEATH.
A FATA ACCIDENT ACCOURED IN THE BC-03 PRIMARY CRUSHER AREA. THE GEHL MODEL 3825 SKID STEER LOADER OPEARTOR WAS PINNED BETWEEN THE BUCKET ARM AND FRONT FRAME CRUSHIG HIS HEAD.
BASED ON THE INFORMATION COLLECTED AT THIS DATE,THE EMPLOYEE WHILE IN AREA ADJACENT TO THE COOLER SYSTEM SUFFER SERIOUS BURNS IN HIS BODY WHEN ASUDDEN AND UNEXPECTED RELEASE OF HOT RAW MATERIA L SPILLED OVER HIM.
BASED ON THE INFORMATION COLLECTED AT THIS DATE THE EMP WHILE IN AREA ADJACENT TO THE COOLER SYSTEM SUFFER SERIOUS BURNS IN HIS BODY WHEN A SUDDEN AND UNEXPECTED RELEASE OF HOT RAW MATERIAL SP ILLED OVER HIM.
DECEASED WAS DOING CLEANING DUTIES IN THE TERCIARY AIR DUCT AT NUMBER SIX KILN AREA,WHEN SUDDENLY HOT DUST MATERIAL RAN INTO THE DUCT INFLECTING SEVERE BURNS ON HIS BODY.
54736YEE WAS FEEDING COAL CRUSHER HOPPER FOR SOME UNKNOWN REASON HE WENT TO THE CLINKER STORAGE AREA USING AN/INCLINED ROADWAY. THE LOADER ROLL OVER AND THE VICTIM'S HEAD WAS CRUSHER WITH THE 58497MENT.
EMPL WAS CLEANING ELECTRIC BRAKER MADE CONTACT WITH POINT BRUSH EXPLOSION OCCURRED & EMPL WAS SEVERELY BURNED.
WITNESSES ALLEGE THAT THE EMPLOYEE WAS PREPARING AN AREA FOR THE TEMPORARY STORAGE OF STEEL BEAMS WHICH WERE BEING OFF-LOADED FROM A FLATBED TRUCK. WHILE THOSE BEAMS WERE SUSPENDED OVERHEAD BY NYLON SLINGS, THEY TILTED, SLID THROUGH THE SLINGS AND FELL, IMPACTING THE EMPLOYEE IN THE HEAD (FACE AREA). THE EMPLOYEE WAS TRANSFERRED BY AMBULANCE TO A NEARBY HOSPITAL WHERE HE WAS PRONOU
THE EMPLOYEE WAS PREPARING HIMSELF TO INSTALL A GIRT CHANNEL. A PARENTLY HE DID NOT MAKE SURE THAT THE LATCH ON THE SAFTEY BELT WAS PROPERY SECURED AND WHEN HE LEANED BACK FOR SUPPORT ON THE LANYARD IS SLEPT AND HE FELL TO THE GROUND. THEFALL CAUSED HIS DEATH.
EMPLOYEE I NAME (# 01-1491)WAS DRIVING EUCLID TRUCK #245 TRANSPORTING QUARRY FROM ANGOLAS QUARERY STORAGE PILE TO CRUSHER #1 HAMMERMILL #1 AFTER HE UNLOADED THE TRUCK HE PROCEEDED TO MOVE TO T HE STORAGE PILE AREA TO LOADED AGAIN BUT AT THATMOMENT I NAME DIDNT SEE I NAME WHO CROSSED IN FRONT OF HIS VEHICLE & RAN OVER HIM I NAME WENT TO LOAD THE TRUCK & WHEN HE CAME BACK TO THE CRUS
ELECTRICIAN CHA3GING STONE WASHER MOTOR STARTER CABLES 440 VOLTS WHEN UNSCREWING ONE LINE WITH ALLEN WRENCH,CABLE WAS ENERGIZED AND RECD ELEC SHOCK BEING ELECTROCUTED.PRELIM-4040 VOLTS.
THE EMPLOYEE WAS TESTING THE CIRCUIT WITH AN INSTRUMENT AND SUDDENLY AN UNPLANNED DETONATION OCCURRED CAUSING THE EMPLOYEE FATAL INJURIES.