Buscar en el registro

Employee was checking rotex screen for possible plugged chute. As the screen was stopping, employee placed hands and right foot against the screen to stop it when the screen shifted causing employees foot to slip in between the screen and the chute resulting in sprain and bruises on right foot/ankle.

While hanging bags on a paper bag sealer in the Open mouth bagging area the employees right hand middle finger was pinched causing a laceration. No stitches were required. Employee was placed on limited use of the right hand.

Employee was operating the Bagging Machine when he noticed his hand was swollen. He put Ice on the hand. He went to the clinic to have it checked out. He was diagnosed with a Mild Strain to the Extenser Tendon. Employee indicated that he noticed his hand being swollen on the previous shift but failed to report it.

Employee reaggravated a pre-existing injury by working on a Stand Monitor water cannon. Employee experienced pain in his hand/arm due to the vibration in the water cannon handle.

While cutting square tubing with band saw, dead end fell off roller saw horse and kicked up end being cut, smashing finger tip between saw and pipe.

Employee was walking through the maintenance shop, another employee was grinding on a steel screen frame. The injured employee received grinding dust in his right eye under his safety glasses. The employee had the foreign body removed at the clinic and received prescription eye drops.

Holding bolt from loader with hand, bolt spun cutting left hand middle finger.

Employee was drilling steel brackets using a drill press. The steel caught and spun around hitting the employees left hand causing a laceration on the palm requiring 5 stitches.

Drill #1 was stuck and EE was using outriggers to lift drill and get rocks under tires. Hand was in open door jam & door to truck slammed on left thumb while raising the outriggers.

EE was changing cutting edges on loader at the shop, tightening bolt with air wrench and finger slipped and got cut by edge of bolt

Two employees were clearing dry vegetation on a steep slope. One employee was cutting brush at the top of the slope with a saw attachment on a weed eater while the other was dragging the cut brush to a staging area. The saw blade kicked through a section of brush striking the second employee in the upper left front side torso resulting in a laceration.

Employee was holding a piece of steel with his hand when cutting with the band saw. Broken teeth on saw grabbed the steel, forcing steel forward and pinching of finger between steel being cut and steel laying next to band saw. Wrapped finger and received stitches at urgent care clinic. Vice not used to secure steel while cutting and hands should have been kept clear.

Associate was changing screens. The assoicate used a grinder to cut off a bolt and a piece of steel landed in the eye. The associate was wearing safety glasses.

Employee was cleaning out around pipes at wash plant in road area. The excavator bucket hit his shoulder knocking him down to the ground.

The individual was standing at a monitor (water canon)-the pumps were boosting the water pressure on a high pressure pump & the monitor brok off at base. Piece of iron striking leg & foot. Threw the individual backwards about 8' and result was broken tibia in left leg, bruised right foot & leg.

Raising steel plates using hoist. Deck strap on plates broke causing plates to upend. Edge of plate caught employees arm causing laceration.

Employee was removing urethane buckets from an elevator. He was using a grinder to cut the bolts. The grinder wheel contacted the bucket enough to create fumes which he breathed. He later stated he did not feel well and went to the hospital where he was diagnosed with inhalation pneumonitis.

The injured employee was removing the bottom access panel of the rosin dryer elevator which had plugged up with wet sand. After removing the clips that held the panel on, EE removed the door. As he was doing this the upper panel pivoted downward because the bolts had vibrated out on one side. The upper panel struck his's right fourth fingertip, fracturing the bone.

EE was cutting out flexco fasteners on a conveyor belt & was kneeling on the belt. He plugged in the die grinder & didn't look to see that it was switched "ON". The grinder started & cut his knee twice above the right knee. He went to the ER & received stitches & returned to work remaining shift.

REMOVING HOSE FROM CHEMICAL INJECTION PUMP. CLOTHING ENTANGLE IN GEAR SHAFT CAUSING FRICTION BURN AND COMPRESSION INJURY.

EE WAS USING A GAS TORCH TO CUT BOLTS OFF REMAINING FASTENERS TO REMOVE LOOSE CUTTING EDGE FROM BUCKET OF PAYLOADER. BUCKET WAS APPROX. 1-2" GROUND AND EE WAS STANDING IN FRONT OF IT. BUCKET F ELL STRIKING RIGHT FOOT (BIG TOE AND 2 SMALL TOES).

EMPLOYEE WAS WELDING AT THE ROSIN DRYER-110 ROOMAREA WHEN HE ACCIDENTLY STRUCK AN ARC WHILE HIS HOOD WAS UP. HE WAS TREATED FOR WELDING FLASH INHIS LEFT EYE.

EE WAS OPERATING SHEAR. MADE ONE CUT THEN PROCEEDED TO REALIGN THE PIECE FOR HIS SECOND CUT, W/O REMOVING HIS FOOT FROM THE FOOT ACTIVATED CONTROL. WHEN HE SHIFTED HIS WEIGHT WHILE TURNING THE PIECE OF STEEL, HE ENGAGED THE SWITCH WHICH ACTIVATED THE HOLD DOWN PLUNGERS WHICH SMASHED THE TIPS OF HIS RING & MIDDLE FINGERS ON HIS LEFT HAND. ALL MACHINE GUARDS WERE IN PLACE WHEN THE AC

THE EE WAS REMOVING 3 LARGE STEEL BOXES 2'X2 1/2'X 2 1/2' FILLED WITH SAND. THE STEEL WAS 1/4"X3/8" THK-WELDED IN THE SHAPE OF A BOX ALL JOINTS HAD SILICONE CAULKING ON THEM. THE STEEL WAS ALS O COVERED WTH SOME OIL. THE BOXES HAD TO B E WIRE BRUSHED ALONG THE EDGES. A CUTTING TORCHE WAS USED TO CUT THE STEEL APART SOMETHING WENT WRONG TO WHERE THERE WAS PAIN IN THE EYE. THE EE HAD

THIS ACCIDENT HAPPENED IN THE QUARRY. THE INJURED WENT TO THE DR. ON 2-22-99 & PLACED HIM ON RESTRICTED DUTY. HE WAS PUMPING OIL FROM A 55 GAL. DRUM IN A FEEDER IN PIT #7. HE WAS USING AN ELEC TRIC DRILL ATTACHED TO THE OIL PUMP. THE BOTTOM OF THE PUMP CAME OFF INSIDE THE 55 GAL. DRUM. THE PART THAT CAME OFF CAUGHT IN THE DRUM & TWISTED THE HAND & WRIST WHICH WAS HOLDING THE DRILL.

EE S KNEE WAS CAUGHT BETWEEN THE ROLL OF STRETCH WRAP AND THE GUIDE POLE OF THE AUTOMATIC WRAPPER.

EE WAS GRINDING ON A PIECE OF STEEL IN THE SHOP, WEARING SAFETY GLASSES, WHEN A PIECE OF RUST SCAR FLEW UP AND EMBEDDED IN HIS LEFT EYE.

WELDING ON 100' STACKER

EMPLOYEE BURNED A PIECE OF METAL OFF OF A PIPE THAT FELL DOWN INTO HIS BOOT VIA BURNING THROUGH HIS JEANS, AND THEREBY BURNED HIS FOOT.

CUTTING IRON & HOSE BLEW APART BY TORCH HANDLE, WHERE HOSE & HANDLE WERE CRIMPED TOGETHER.

WHILE USING A HAND GRINDER, THE GRINDER SLIPPED OUT OF THE EE'S HAND CUTTING HIS LEFT HAND.

INJURED WAS OPERATING FLOOR SWEEPER WHEN HE NOTICED SIDE DOOR PANEL SWINGING OPEN HE TRIED TO CLOSE THE DOOR BY REACHING BACK WITH HIS LEFT HAND WHILE STILL DRIVING HT EMACHINE. HIS HAND MISS ED THE DOOR EDGE AND CONTINUED ON INTO THE FAN BLADES OF THE ENGINE, WHICH WERE EXPOSED BECAUSE THE DOOR WAS OPEN. HE RECEIVED 8 STITCHES IN HIS RING FINGER AND 4 STITCHES IN HIS MIDDLE FING

THE ACCIDENT WAS TURNED IN ON 10-18-93 INJURED WENT TO THE DOC 10-21-93 WHICH RESULTED IN RESTRICTED DUTY HE THEN MISSED WORK ON 10-28-93 & IS CURRENTLY OFF HE WAS WELDING DEMISTERS BARS IN A SCRUBBER HE OVEREXTENDED HIMSELF BECAUSE OF AWKWARD POSITION HE FELT PAIN IN HIS LOWER BACK

INJURED WAS PULLING STRECH FILM OFF THE ROLL TO WRAP A PALLET OF SAND WHEN THE ROLL DISENGAGED FROMHOLDER AND FELL ON HIS RIGHT FOOT JUST BEHIND HIS STEEL TOE, BREAKING HIS LITTLE TOE.

EMPLOYEE STARTED AT GROUND WHILE OTHER EMPLOYEE WAS WELDING, BUT HIS EYES CAUGHT THE FLASH OF THE WELD. EMPLOYEE WENT TO THE EMERGENCY ROOM 81/2 HRS. AFTER THE TIME OF THE ACCIDENT. THIS ACCID ENT WAS NOT REPORTED TO THE COMPANY. EMPLOYEE WAS OFF WORK 10/6/93 DUE TO FLASH BURN.

INJURED WAS HANGING BAGS ON BAG FILLING MACHINE, WHEN HE PLACED A BAG ON FILL SPOUT WITH HIS LEFT HAND & STARTED FILL PROCESS WITH RIGHT HAND. WHEN ACTUATED MACHINE CLAMPED DOWN ON ED'S LEFT I NDEX FINGER.

EMPLOYEE WAS TRYING TO FREE A PLUG-UP OF ROCKS AND CLAY FROM THE ENTRANCE OF THE STEDMAN IMPACT CRUSHER WITH A 6' LONG LENGHT OF CONDUIT WHEN THE PLUG-UP CLEARED ITSELF. EMPLOYEE WAS UNABLE TO PULL THE CONDUIT BACK BEFORE IT HIT THE STEDMAN WHEEL. THE STEDMAN WHEEL THEN JERKED THE CONDUIT IN A SWINGING MOTION STRIKING EMPLOPYEE IN THE HEAD.

EE WAS REPAIRING THE HYSTER TOWNMOTOR CAGE BY WELDING IN SUPPORT BRACKETS. HE ACCIDENTLY STRUCK AN ARC WITH THE ELECTRODE BEFORE FLIPPING DOWN HIS WELDING HOOD. EE WAS TREATED FOR ACUTE FLASH BURNS TO BOTH EYES.

INJURED INDIVIDUAL WAS ADJUSTING THE BAG SADDLE ON A ST REGIS FORCE FLOW SAND PACKER HIS SHOULDER HIT THE TRIGGER CAUSING THE EQUIPMENT TO PINCH THE SKIN ON HIS RT THUMB HE RECEIVED 7 STITCHES ON HIS RT THUMB HE DID NOT HAVE ANY RESTRICTIONON HIS RETURN TO WORK

JAMMED FINGER ON STEERING CLUTHES WHILE OPERATING CAT D-9 TRACTOR.

EE WAS TRANSFERRING A LOAD STEEL FROM AN ELECTRICAL HOIST TO A MANUAL HOIST WHEN THE LOAD SHIFTED AND CAUGHT THE EE ON THE LEGS.

INJURED EMPLOYEE WAS REPAIRING A STEAM COIL DRYER SHELL. HE WAS GRINDING THE SIDEWALL WITH A HAND GRINDER. AN AIRBORNE PARTICLE RUST ENTERED HIS RIGHT EYE. A DOCTOR REMOVED THE OBJECT. HE RECE IVED A TETANUS SHOT AND A PRESCRIPTION.

CUTTING STEEL HIT SOME SLAG SPARKS IN EAR

INDIVIDUAL WAS DISASSEMBLING TEMPORARY FALSEWORK USED IN DRYER REPAIR. HE WAS USING A CUTTING TORCH IN DISASSEMBLING AND USING A FOLDOUT LADDER. THE LADDER WAS SITUATED AT COLUMN IN ATTACH SKE TCH. ONCE THE WORK WAS COMPLETED ON THAT COLUMN HE STEPPED ACROSS TO COLUMN (2) AND PLACED HIS FOOT AS SHOWN ON SKETCH. HE WAS CUTTING ITEM (1) FROM ITEM (4) AND IT DROPPED ON HIS FOOT.

EMPLOYEE WAS LIFTING A 1/4" STEEL PLATE WITH ANGLE IRON LEGS WITH A PLATE HOOK FROM HORIZONTAL POSITION WHEN THE ANGLE IRON LEGS DUG INTO THE FLOOR. IT CAUSED THE PLATE HOOK TO OPEN AND ALLOW THE PLATE TO FALL DOWN SCRAPING HIS LOWER RIGHT LEG AND HITTING THE ARCH OF HIM FOOT.

EMPLOYEE WAS LOADING BULT SAND INTO PALLETAINERS. FINE SAND BELLOWED OUT OF PALLETAINER OR FLEW OUT OF AIR OPERATED SLIDE AND INTO EYES. HE WAS WEARING PRESCRIPTION SAFETY GLASSES. SAND WAS REMOVED FROM EYES AND A PRESCRIPTION ISSUED.

EMPLOYEE WAS STANDING IN FRONT OF PALLETIZER WHEN FORKS PUHED THE PALLETS OUTWARD HE TRIED TO STOP THEM FROM BEING PUSHED ON TOP OF HIM A BAD PALLET IN THE MAGAZINE CAUSED THE FORKS TO PUSH TH E STACK OUTWARD

OPERATOR HAD BEEN WELDING IN THE MAINTENANCE SHOP FOR A LONG PERIOD OF TIME AND A FLASH WAS NOTICED LATER ON WITH SCRATCHING AND BURNING FEELING IN BOTH EYES. INDIVIDUAL RECEIVED PRESCRIPTION.

A SHIPMENT OF STEEL WAS RECEIVED THAT HAD STEEL BANDING. THE INDIVIDUAL CUT THE STEEL BANDING WITH ACETYLENE TORCH. THE BANDING FLIPPED UP AND BURNED THE GLOVE AND HIS FINGER. HE RECEIVED A PR ESCRIPTION AND DON'T USE RIGHT HAND FOR ONE WEEK

WHILE LIFTING A3PIPE 40 FT X 6 FT WITH A 5 TON CRANE I.NAME LOWERED THE PIPE TO THE FLOOR WHEN THE PIPE HIT THE END OF ANOTHER PIECE OF PIPE THE PIPE I.NAME WAS LOWERING ROLLED ON TO I.NAMES LEFT FOOT BREA5ING HIS BIG TOE