Buscar en el registro

HE WAS CUTTING OFF ANGLE IRON WITH A CUT OFF SAW WHEN SPARKS BOUNCED OFF GUARD COMING UNDER SAFETY GLASSES HITTING RIGHT EYE.

EE was doing plant maintenance when he discovered he had an acetylene leak on torch. He inhaled the acetylene.

EE WALKED BEHIND ANOTHER EE WHO WAS GRINDING ON A METAL PIECE WHEN A PIECE OF METAL FLEW FROM THE GRINDER AND HIT HIM IN THE RIGHT EYE.

EE SUSTAINED WELDING FLASH BURNS TO BOTH EYES WHILE PERFORMING MAINTENANCE DUTIES IN THE AREA THAT ARC WELDING WAS BEING CONDUCTED.

EE WAS POWERWASHING MUD AND GREASE OFF OF THE TRANSMISSION THROUGH THE INSPECTION PLATE ON THE CATWALK OF LOADER. HIS FOOT WAS IN THE INSPECTION HOLE. THE WAND OF THE SPRAYER HUNG UP ON A HYDR AULIC HOSE. THE POWER WASHER WENT THROUGH HIS BOOT. THE HEATED WATER ENTERED HIS BOOT AND BURNED THE BOTTOM OF HIS FOOT GIVING HIM 2ND DEGREE BURNS.

EE WAS THREADING A BIT ONTO THE DRILL STEM WHEN IT MISTHREADED & BEGAN TO WOBBLE THE BIT CAUGHT HIS GLOVE & TURNED HIS ARM AROUND THE DRILL STEM

WHILE HOISING A LOAD WITH A TRUCK MOUNTED CRANE,THE CHAIN CAME UNHOOKED AND SWUNG BACK AND STRUCK HIM IN THE FOREHEAD

WHILE DRILLING HOLE TO REPAIR TRUCK FRAME, THE DRILL CAUGHT AND HIT HAND.

IN THE PROCESS OF CUTTING A HYDRAULIC HOSE WITH ELECTRIC GRINDER. DURING THE PROCESS A PIECE OF STEEL BRAIDED HOSE FLEW AROUND SAFETY GLASSES INTO HIS EYE.

EMPLOYEE WAS ATTEMPTING TO PULL A 4" STEEL POST/PIPE OUT OF GROUND USING CRANE. AS HE HOISTED UP ON THE LOAD LINE THE BOOM AND CAB TIPPED FORWARD AND TO THE RIGHT FALLING OFF THE TRUCK FRAME.

WHILE TIGHTENING WHEEL WITH AIR WRENCH EE STARINED HIS BACK.

EMPLOYEE WAS GRINDING WITH GRINDER. IT BACKLASHED AND CUT INSIDE OF LEFT FOREARM.

EMPLOYEE WAS STARTING TO SHUT THE COMPRESSOR DOWN, WHEN IT MALFUNCTIONED CAUSING BURNS TO LEFT ARM AND EAR.

EE WAS DISENGAGING THE CLUTCH ON THE PRIMARY CRUSHER ENGINE WHEN IT "KICKED BACK," HITTING HIM IN THE RIB AREA.

ROCK FELW UP AND STRUCK EMPLOYEE IN BACK OF HEAD. ROCK WAS FROM SECONDARY PLANT.

EE WAS REMOVING A NUT THAT WAS LODGED IN IMPACT WRENCH SOCKET, WHEN THE POWER TRIGGER WAS ACCIDENTALLY PUSHED CAUSING THE NUT TO LACERATE HIS LEFT INDEX FINGER.

EE WAS POKING ROCK OUT OF PLANT. A FLAT ROCK FLEW OFF BELT AND HIT HIM BEHIND HIS LEFT KNEE.

EE WAS ATTEMPTING TO CUT DOWN SMALL TREE WHEN IT FELL TOWARDS HIM STRIKING HIM.

EMPLOYEE WAS STANDING ON CATWALK ON CRUSHER WHEN CRUSHER THREW ROCK OUT AND HIT EMPLOYEE IN THE HEAD AND FACIAL AREA.

EMPLOYEE WAS GRINDING ON A PIECE OF METAL WITH A PORTA GRINDER, AND WAS NOT WEARING PROPER EYE PROTECTION FOR PARTICULAR JOB BEING PERFORMED. SOME PARTICALS OF METAL FLEW INTO HIS EYE. HE WA S ABLE TO RETIEVE WHAT HE THOUGHT WAS ALL OF THE PIECES WITH THE CORNER OF HIS HANDKERCHIEF, BUT APPARENTLY MISSED ONE PIECE, WHICH BECAME THE IRRATENT THAT REQUIRED MEDICAL ATTENTION.

EMPLOYEE WAS USING EXTENTION BUCKET OF 988 B. THE CHAIN BROKE CAUSING EXTENSION TO SWING SIDEWAYS INTO EMPLOYEE.

EMPLOYEE WAS HOLDING A PIECE OF 3/4 INCH STEEL PLATE WHILE CRANE OPERATOR LOWERED IT IN PLACE. AFTER IT PASSED THE BREAK OVER POINT IT MOVED IN SUDDENLY CATCHING HIS HAND BETWEEN THE PLATE AND RUBBER TIRE ON CRUSHER. AFTER X-RAY EMPLOYEE RETURNED TO WORK WITH ONLY ELASTIC WRAP. X-RAY INDICATED A BRUISE.

EMPLOYEE WAS OPERATING A ROCK DRILL IN QUARRY AND HAD ALSO BEEN THROUGH THE SHOP AREA, SO IT IS HARD TO SAY EXACTLY WHERE HE WAS WHEN STEEL ENTERED HIS EYE. THE DAMAGE DONE WAS MILD AND NO IMP AIRMENT INDUCED.

EE WAS TRAINING TO DRILL WITH OTHER HE NOTICED A CRACK ON THE COUPLER. HE THEN SHUT DOWN TO INFORM HIM HE GEGAN TO REPAIR THE DRILL AS EE WATCHED. EE REMOVED HIS SAFETY GLASSES TO WIPE THE SWE AT FROM HIS FOREHEAD HE STARTED TO BACK UP THE DRILL STEEL CAUSING A ROCK TO BECOME AIRBORNE. AND STRIKING EE IN THE RIGHT EYE.

WORKING ON DOZER.HAD ROLL BAR CHAINED UP.ONE EMPL IN CAB ACCIDENTLY GRABBED HYDRAULIC LEVER.THIS BROUGHT THE BUCKET UP AND RELEASED TENSION ON ROLL BAR.IT FELL,HITTING EMPL IN BACK AND KNOCKIN G HIM TO THE GROUND.HAD BEEN STANDING ON THE TRACK.HIT KNEE ON TRACK AS HE FELL.AMBULANCE WAS CALLED.

EE WAS CUTTING OLD VISE OFF WORK BENCH WHEN PLATE SPRUNG UP AND A PIECE OF METAL FLEW UP OFF BENCH AND WENT IN HIS EYE.

EMPL REMOVING TRACK FROM DRILL.RIGHT HAND CAUGHT UNDER TRACK.3RD FINGER-MASHED AND BROKEN.MIDDLE FINGER WAS MASHED.

HE WAS TIGHTENING A NUT AND BOLT WITH AN IMPACT WRENCH AND AN OPEN END WRENCH. THE OPEN END WRENCH SLIPPED OFF AND STRUCK HIM IN THE NOSE.

EMPLOYEE WAS WELDING AND WORK ON 988 BUCKET WITH A GRINDER AND WELDER. HE BURNED BOTH EYES AND GOT A PIECE OF SLAG IN HIS LEFT EYE.

EMPLOYEE WAS DRILLING A BOLT OUT WITH A DIE GRINDER A PC.OF METAL FLEW UP & LODGED IN HIS EYE STEEL WAS REMOVED BY DOC.& EMPLOYEE RETURNED TO WORK NO LOST TIME

I.NAME LOOKED AT OR CAUGHT A FLUSH FROM A WELDING MACHINE

WAS REHOOKING DRILL TO COMPRESSOR AT AN ANGLE TO TONGUE HE DID SEE TRACK OF DRILL HIT TONGUE KNOCKING IT ONTO HIS RIGHT FOOT.

EMPLOYEE WAS BA7KING UP ON DOZER AND RAN OVER A BIG ROCK. WHEN DOZER CAME DOWN OFF THE BIG ROCK, IT JARRED HIS BACK AND HURT IT.

EMPLOYEE WAS RA3SING DRILL STEEL WHEN BOLT ON BOTTOM OF DRILL BROKE LETTING DRILL STEEL FALL AND HIT EMPLOYEE ON FOOT.