Buscar en el registro

Employee was working on a stone cutting machine and a small piece of stone broke and hit EE in the left cheek.

Employee was welding when a piece of slag went past safety glasses and got in left eye.

Employee was using a bench grinder when EE's shirt became entangled.

Employee was splitting stone when a piece hit the employee in the forehead.

Employee was splitting stone and a piece of stone split and cut into the employees left elbow.

Employee was cutting stone when a 12in. piece broke off and struck in the face

Employee was positioning stone when EE pinched hand.

Stone came off the belt and hit employee's right thumb

Operator's right thumb got caught between the cutting head and stone

Employee was splitting rock when a rock came off the belt, and hit his hand causing a laceration on his right index finger.

A fragment of stone struck employee on the left side of his face causing a laceration.

When re-positioning the stone of the machine he accidentally stepped on the foot pedal causing his thumb to be pinched between the machine and the stone. His left thumb was lacerated at the tip.

Flying rock off from splitting hammer, lacerating left side of face.

Employee crushed left thumb between stone and machine.

While employee was trimming stone a piece of debris entered his left eye under his glasses.

While splitting a stone on the guillotine, a piece fell off the rollers and onto his feet.

Employee alleges that stone chip embedded in right shoulder while splitting stone, causing a puncture wound. X-rays did not show any foreign body.

He was splitting rock and a piece of the rock broke off and embedded into his arm.

Employee was operating a stone cutting machine and caught his hand between a rock and the machine.

Laceration to left pinky finger.

He noticed that the outfeed belt on the machine he was working on stopped. He then pushed on the belt with his left hand. As he did the belt re-engaged catching his finger between the belt and rolls.

He was splitting stone and a piece of stone flew back and lacerated his arm.

He was tailing a guillotine with two men standing at the end splitting stone. A piece of stone from one of the two men broke off and hit him in the abdomen.

Employee was using a saw to cut material when it kicked up. Employee claims that he strained his right shoulder.

He was tailing a guillotine when the belt stuck, so he pulled on the belt to free it. When he did the gave way with a rock and the rock hit him in the right knee causing some pain and swelling to the left front part of the knee.

He was cutting on a chop saw when stone got caught and pulled arm into blade, causing a laceration to the left thumb and forearm.

No conditions contributing.

No conditions contributed to the accident, employee did not follow proper procedure.

Employee was using a stone cutting saw when he was not following proper procedure and placed his hand in the path of the blade causing a laceration to his right hand.

Employee was using a log splitter when he pinched his finger between a piece of wood and the splitter.

Employee was using a diamond bladed masonry saw when a piece of stone became jammed in blade. Employee attempted to remove the material when the saw blade re-engaged and pulled his hand into the blade.

EMPLOYEE WAS PALLETIZING MATERAIL (CAPSTONES) WHEN A PIECE TIPPED OVER & PINCHED HIS LEG AGAINST THE PALLET. EE REPORTED BRUISING & SOME SWELLING BUT CONTINUED TO WORK. AFTER 2 WEEKS HE WAS COMPLAINING OF PAIN & DECIDED TO GO TO THE DOCTOR. DR DID X-RAYS & FOUND A FRACTURE IN THE TIBIA. 1ST VISIT TO DR ON 4-23-04. EE WORKED FROM 4-9-04 TO 4-23-04.

EE WAS DRILLING MATERIAL USING A PNEUMATIC DRILL WHEN HE ALLEGED THAT THE DRILL BIT SLIPPED OUT OF THE DRILL HOLE & HE TWISTED HIS RIGHT SHOULDER.

EMPLOYEE WALKED BY A DRILL PRESS AND BRUSHED THEDRILL PRESS CAUSING A STEEL PIN TO ROLL OFF AND LAND ON HER TOE.

EMPLOYEE WAS TAILING THE GUILLOTIRE TAKING THE CUT STORES TO TRIM THEM. HE REACHED IN WITH HIS LEFT HAND TO PULL OUT A CUT PIECE OF STONE WHILE ANOTHER STONE WAS BEING CUT, IT SHOT OUT OF THE BUILLOTINE THE SAME TIME HE REACHED IN.

EE STATES THE OTHER OPERATOR ON THE GUILLOTINE WHLE EE WAS TAILING, CUT A STONE AS IT WAS CUTTING A PIECE OF STONE CAME SHOOTING ACROSS THE BELT AT THAT POINT EE WAS PICKING UP A PIECE OF STO NE TO PUT INTO THE DUMPSTER JUST AS HE DID THE SHOOTING PIECE OF STONE CAUGHT HIS FINGER BETWEEN THE 2 STONES

WHILE PUSHING A STONE THROUGH THE STONE CUTTING MACHINE EE HAD HIS LEFT HAND OVER THE PIECE OF STONE AND WHEN THE TEETH WERE COMING DOWN EE PULLED HIS HAND AWAY AND WHILE DOING SO HIS FINGER G OT PINCHED BETWEEN THE TEETH AND THE PIECE OF STONE.

WHILE DRILLING A SLAB OF STONE WITH A BBD-12D AIR DRILL, A PIECE OF THE SLAB CAME OFF & HIT HIS LEFT FOOT ABOVE HIS STEEL TOE BOOTS.

EE DID NOT STEP TO SIDE OF STONE CUTTING MACHINEWHILE HYDRALIC PRESSURE WAS APPLIED TO CUT THE STONE A SMALL PIECE BROKE AWAY FROM LARGE STONE AND MADE SMALL CUT ON EE'S FOREARM

WHILE WORKING AT THE END OF A STONE SPLITTING MACHINE EE FELL AND THE STONE HE HAD HIT HIS RIGHT ARM.

EMPLOYEE ALLEGES WHILE HE WAS PALLETIZING STONE A PIECE FELL AND HIT HIS RIGHT KNEE AND HIP.

A STONE FELL OFF THE ROLLS OF A STONE SPLITTING MACHINE AND LANDED ON EMPLOYEE'S LEFT FOOT.

WHILE PATTETIZING STONE HE DROPPED A STONE ON HIS RT FOOT

WHILE CLEANING OUT BOTTOM TRAY OF STONE CUTTING MACHINE THE LEVER WAS RELEASED TOO SOON BY ANOTHER EMPLOYEE THEREFORE THE TEETH RETRACTED & PINCHED HIS MIDDLE LEFT FINGER

WHILE SPLITTING STONE WITH A HYDRASPLIT STONE CUTTING MACHINE HE PLACED HIS HAND BETWEEN THE TEETH ON THE MACHINE & THE STONE & INJURED HIS LEFT INDEX FINGER